''U'' BRACKET FOR LED FLOODLIGHT - LCFLD-BRACKET-U-BR

Name: ''U'' BRACKET FOR LED FLOODLIGHT - LCFLD-BRACKET-U-BR
Brand: LEDCO
SKU: LCFLD-BRACKET-U-BR
Price: 33.97 CAD
Availability: InStock

SKU: LCFLD-BRACKET-U-BR

Brand: LEDCO

Aiming your light exactly where it needs to go starts with the right mount, and that is precisely the job of this "U" bracket for LED floodlight (SKU LCFLD-BRACKET-U-BR). Also called a yoke bracket, a trunnion-style cradle or simply a flood light bracket, it holds the fixture on both sides so the head can pivot up or down and then lock solidly in position. If you have been searching for a light mounting bracket, an installation bracket or a replacement for a bent or missing original, this is the classic U-shaped hardware that does the work on walls, soffits, parapets, beams and poles.

The bracket is built from rigid metal with a protective coating, so it stands up to rust and corrosion in outdoor, wet-location installations where rain, road salt and freeze-thaw cycles are part of daily life. Because it grips the floodlight at both ends rather than at a single point, the weight is shared evenly: the fixture resists sagging and vibration over the years, even when it is mounted high on an exposed wall or on a windy pole. Aiming is simple — loosen the pivot bolts, tilt the head to the angle you want, then torque the hardware down so the beam stays exactly where you set it. Several bracket sizes exist across the floodlight family, so before ordering, confirm that the mounting holes and hole spacing on your fixture match this style of U bracket.

This bracket earns its keep on driveways, parking areas, loading docks, farm yards, warehouse walls, garages, sports areas and building façades — anywhere a Canadian homeowner, contractor or small business needs a beam pointed with precision and kept there through a full winter. It is equally at home on a brand-new install or on a retrofit where the original hardware is damaged. Pair it with a fixture such as the 30-50-60W LED floodlight, or compare mounting styles with the knuckle bracket for LED floodlight, the trunnion bracket for LED floodlights and the pole bracket for LED floodlights. Order the bracket that finally puts your light where you want it.

Compatible with
Works with:
Fixture: LCFLD-60W-50W-30W-CCT-MK-U

Built to hold, built to last
The "U" bracket for LED floodlight is a simple piece of hardware that quietly decides how good your installation looks in five years. It is made of rigid metal finished with a protective coating that resists rust and corrosion in outdoor, wet-location service. The U shape cradles the floodlight body on both sides, so the load is balanced between two pivot points instead of hanging off one. That is what keeps a fixture from drooping over time, and what keeps a beam from drifting when wind, passing trucks or a snow-loaded roofline send vibration through the wall.

Precise aiming, then lock it down
This is a yoke or trunnion-style mount: the fixture tilts within the bracket and is clamped at the chosen angle. Practically, that means you can wash a wall evenly, drop the beam onto a driveway apron without glaring into the neighbour's window, or throw light across a yard from the same mounting point. Set the tilt with the bolts snug but not final, power the fixture up at dusk to confirm the aim, then torque the pivot hardware firmly. It is the fastest way to avoid climbing back up the ladder a second time.

Installation and mounting details
Anchor the bracket into solid framing, structural steel or masonry using fasteners suited to the surface — lag screws into blocking, sleeve or wedge anchors into concrete and block. Avoid mounting into siding alone. On a pole or a square upright, make sure the base sits flat and shim if needed so the bracket is not twisted when tightened. Route and seal the fixture's supply cable so water drips away from the entry point rather than following the cable into the housing. After the first season of freeze-thaw and high wind, re-check every fastener and the pivot bolts; a two-minute inspection keeps the beam on target for years.

Compatibility with your floodlight
This U-shaped style is used with many common LED floodlight bodies, but bracket sizes vary across the floodlight category. Before ordering, measure the spacing between the mounting holes on the sides of your fixture and compare it to this bracket. It works for new installations and for replacements where the original bracket has been bent, seized or lost. If a different geometry suits your site better, look at the knuckle bracket for LED floodlight for a compact swivel mount, the trunnion bracket for LED floodlights for a surface-mounted cradle, the trunnion bracket for LED floodlights 400W-500W for the largest heads, or the pole bracket for LED floodlights when the fixture goes on a round or square pole.

Where it gets used
Contractors reach for this bracket on commercial façades, warehouse and loading-dock walls, shop yards and equipment compounds. Homeowners use it over garage doors, on barns and sheds, above driveways and to uplight a house wall or a stand of trees. Small businesses use it to light customer parking and rear exits safely. Pair it with a compact fixture such as the 30-50-60W LED floodlight and you have a complete, aimable outdoor lighting point. Quote the SKU LCFLD-BRACKET-U-BR when you order so you get the right bracket the first time.