''U'' BRACKET FOR LED FLOODLIGHT

Name: ''U'' BRACKET FOR LED FLOODLIGHT
Brand: LEDCO
SKU: LCFLD-BRACKET-U-BK
Price: 33.97 CAD
Availability: InStock

SKU: LCFLD-BRACKET-U-BK

Brand: LEDCO

Your floodlight is only as solid as the piece holding it up. The "U" bracket for LED floodlight — often called a yoke, a U-mount or a flood light bracket — wraps around the body of the fixture and anchors it firmly to a flat surface, a wall, a soffit or a pole. It is the part people go looking for when the original hardware is bent, rusted or simply missing after a few hard winters, and the part contractors keep in the van when a standard light mounting bracket doesn't line up with the surface in front of them. SKU LCFLD-BRACKET-U-BK, in black, to match the look of most outdoor flood fixtures.

Built for outdoor exposure, this installation bracket resists rust and weathering season after season, so it keeps doing its job through freeze-thaw cycles, road salt and the vibration of a windy parking lot. Pre-drilled slots accept common fasteners and give you a little room to correct your alignment while you work — a small detail that saves a lot of frustration on uneven brick, wood or metal. The pivot points let you tilt the fixture to the exact angle you want, then lock it down hard so the aim stays true instead of drifting downward a few months later. Because the shape is symmetrical, the same bracket can often be inverted for ceiling, soffit or under-eave mounting.

It's right at home on a garage wall, a shop entrance, a loading dock, a farm building, a sign, a backyard rink or a pole-mounted flood light on a small commercial lot — anywhere a Canadian building needs light aimed precisely and held there. Since floodlights vary from one model to another, check the spacing and hole pattern of your fixture before ordering; this style suits slim panel-type floods such as the 30-50-60W LED floodlight. If a different mounting method works better for your project, look at the knuckle bracket for LED floodlight, the trunnion bracket for LED floodlights or the pole bracket for LED floodlights. Get your fixture mounted solid the first time — add the "U" bracket to your order.

Compatible with
Works with:
Fixture: LCFLD-60W-50W-30W-CCT-MK-U

What this bracket is and what it replaces
The "U" bracket — also known as a yoke or U-mount — is a single piece of hardware shaped like the letter U that cradles the body of a flood light between its two arms. The fixture pivots between those arms; the base of the U bolts to your surface. People order it for two reasons: to replace an original bracket that has been bent, corroded or lost, and to add a secure mounting option where the hardware that came in the box simply doesn't fit the wall, the pole or the soffit in front of them. It's one of those small parts that decides whether a job looks clean and stays aimed, or whether you're back on the ladder next spring.

Build and outdoor durability
This flood light bracket is made for outdoor exposure and resists rust and weathering season after season — important on a Canadian exterior where a mounting point takes rain, ice, snow load, road salt spray and constant vibration from wind. The black finish blends with the housing of most outdoor floods, so the bracket disappears visually and the light does the talking. Pre-drilled slots accept common fasteners and allow small alignment corrections during installation, which matters when you're anchoring into brick, block, treated wood or a steel pole and your holes can't be perfect. The pivot points hold the tilt angle firmly once tightened, keeping the beam where you set it.

Technical specifications
SKU: LCFLD-BRACKET-U-BK
Type: "U" bracket (yoke / trunnion-style mount) for LED floodlights
Colour: black
Use: flat surface, wall, pole, ceiling, soffit or under-eave mounting
Mounting holes: pre-drilled slots for common fasteners, with alignment adjustment
Adjustment: pivot points allowing tilt and angle locking
Environment: outdoor exposure, rust and weather resistant

Compatibility — check before you order
Floodlights are not standardized, so the single most important step is to measure the spacing between the mounting ears of your fixture and compare the hole pattern before ordering; several sizes exist to suit slim panel-style floods as well as heavier area and sports-style fixtures. This U-style mount pairs naturally with compact outdoor floods like the 30-50-60W LED floodlight. If your fixture needs a different geometry, the family includes the knuckle bracket for LED floodlight for a swivel-and-aim wall mount, the trunnion bracket for LED floodlights, and the pole bracket for LED floodlights for round or square poles on parking lots and yards.

Installation tips and real-world uses
Mount the bracket first, then attach the fixture, then run your wiring with a drip loop so water runs away from the connection instead of tracking into it. Aim the light with the fasteners slightly loose, confirm the coverage after dark — a driveway, a loading dock, a storage yard, a barn wall, a hockey rink in the backyard — then tighten fully. For ceiling, soffit or under-eave work, the bracket can often be inverted so the fixture hangs below and points outward. Typical projects: relighting a garage or shop entrance, adding security lighting over a side door, lighting a commercial sign, aiming floods across a small parking area, or refreshing an old halogen installation with LED while reusing the same anchor points. Note that no spec sheet, IES file or installation video is listed in the Documentation tab for this accessory — so when in doubt, go by your fixture's own measurements.