KNUCKLE BRACKET FOR LED FLOODLIGHT - LCFLD-BRACKET-K-BR

Name: KNUCKLE BRACKET FOR LED FLOODLIGHT - LCFLD-BRACKET-K-BR
Brand: LEDCO
SKU: LCFLD-BRACKET-K-BR
Price: 51.97 CAD
Availability: InStock

SKU: LCFLD-BRACKET-K-BR

Brand: LEDCO

Point your light exactly where it needs to go. The knuckle bracket LCFLD-BRACKET-K-BR is the small accessory that turns a good floodlight into a perfectly aimed one. Also searched as a flood light bracket, light mounting bracket, installation bracket or simply a light bracket, it replaces or supplements the standard yoke on an LED floodlight and adds a pivoting joint you can loosen, rotate and re-tighten. The result is real control: you set the beam on a wall, a sign, a yard or a parking area, walk back to check the throw, and adjust again — all without touching the mounting point you worked so hard to anchor and seal. It is the go-to fix for facades, signage, loading docks, sports areas and perimeter lighting where "close enough" simply is not good enough.

This bracket is built for outdoor duty. It is made from weather-resistant material with a protective finish, so rain, snow, humidity and Canadian temperature swings do not get the better of it. The locking mechanism is designed to hold its position over time, which matters more than people think — a joint that slips means a beam that slowly drifts off the target and a service call you did not plan for. The hardware pattern is made to match common LED floodlight housings, so it drops into place on typical fixtures instead of forcing you into custom drilling. Several finishes may be offered across the line, so the bracket blends with the fixture and with the building rather than standing out as an afterthought.

Wall, soffit, parapet, post or pole: mount the bracket to a solid surface with appropriate anchors, attach the floodlight, set the angle and tighten the knuckle firmly. Use outdoor-rated fasteners and seal any wall penetration so water stays outside. Aim slightly downward to limit glare toward neighbours and traffic, and re-check the tightness of the joint after the first Canadian winter. This knuckle bracket is made to work with LED floodlights such as the 30-50-60W LED floodlight, and it sits alongside our other mounting options if your project calls for something different. Get the aim right the first time — add the bracket to your floodlight order.

Compatible with
Works with:
Fixture: LCFLD-60W-50W-30W-CCT-MK-U

What a knuckle bracket actually does
A floodlight is only as good as its aim. Factory yokes get you in the neighbourhood, but a knuckle bracket gives you a true pivoting joint between the mounting surface and the fixture: loosen it, swing the head, lock it down. Because the adjustment happens at the bracket and not at the anchors, you can fine-tune the beam after the fixture is powered up and see exactly what the light is doing on the wall, the sign or the pavement. That single feature saves a surprising amount of time on site — no re-drilling, no re-sealing, no guessing from a ladder at eight in the morning about what the throw will look like at eight at night.

Construction and outdoor durability
The bracket is made from weather-resistant material and carries a protective finish, the two things that decide whether an outdoor accessory lasts one season or many. Rain, snow, road spray, humidity and freeze-thaw cycles all attack the weak point of any adjustable mount — the joint — so the locking mechanism here is designed to hold its set position over time rather than creep under vibration and wind load. The hardware pattern follows common LED floodlight housings, which means it lines up with the mounting holes you already have on typical flood fixtures instead of demanding an adapter plate.

Technical specifications
SKU: LCFLD-BRACKET-K-BR
Type: Knuckle bracket (adjustable pivoting mount) for LED floodlights
Material: Weather-resistant material with protective finish
Use: Indoor and outdoor floodlight mounting on wall, surface or pole
Adjustment: Loosen, rotate, re-tighten locking joint
Compatibility: Hardware pattern made to match common floodlight housings

Installation and good practice
Choose a solid substrate — masonry, structural wood blocking, a steel plate or a pole — and anchor the bracket with fasteners rated for exterior use. Attach the floodlight to the knuckle, run and seal the wiring, then power up, set the angle and tighten the joint firmly so it will not move. Seal every wall penetration with an exterior-grade sealant to keep water out of the cavity, and keep the light mounting bracket clear of snow build-up where you can. Two habits pay off in Canada: aim slightly downward so the beam lands on your property and not in a neighbour's window or a driver's eyes, and re-check the tightness of the knuckle after the first winter, once the metal has been through a full cycle of cold and heat.

Where it fits and what pairs with it
Use it on building facades and entrances, above overhead doors and loading docks, on signage and flagpoles, around parking lots, storage yards, farms, arenas and sports surfaces, and anywhere a security beam needs to cover a specific zone rather than spill everywhere. It pairs naturally with an LED floodlight such as the 30-50-60W LED floodlight. If your installation calls for a different mounting style, the same family offers the knuckle bracket in black, the pole bracket for LED floodlights for pole-mounted flood light installations, and the trunnion bracket for LED floodlights for yoke-style mounting. No separate documentation is listed for this accessory; for beam data and electrical details, refer to the Documentation tab of the floodlight you are pairing it with.