SLIM LED RECESSED 12/24V 4" DLF ROUND - 8W

Name: SLIM LED RECESSED 12/24V 4" DLF ROUND - 8W
Brand: LEDCO
SKU: LCDL-DLF4-24V-2CCT-WH
Price: 39.97 CAD
Availability: InStock

SKU: LCDL-DLF4-24V-2CCT-WH

Brand: LEDCO

Need a downlight that disappears into the ceiling and still throws a clean, comfortable pool of light? The SLIM LED RECESSED 12/24V 4" DLF ROUND - 8W is the ultra-thin low-voltage pot light people look for when the ceiling cavity is shallow, the joists are in the way, or the project simply runs on 12V or 24V. Call it a slim panel, a flat panel downlight, a round LED light or a recessed LED downlight — it does the same job: a flush, glare-controlled wash over counters, hallways, cabinetry and coves, with a diffused lens that softens the LED source instead of blasting it in your eyes. Because the housing is so flat, it drops straight into a clean ceiling opening, which makes it a favourite for retrofits, camper vans, RVs, boats, trailers and off-grid or solar builds.

The numbers back up the feel. This fixture draws just 8W and delivers 600±50 lumens through a wide 120° beam angle, so a handful of units cover a room evenly with no hot spots or dark gaps. A CRI over 80 keeps skin tones, wood grain, food and merchandise looking natural, and the built-in 3000K / 5000K tunable selector lets you pick warm white for a cozy den or crisp cold white for a work zone — same fixture, two moods. It runs on 12/24V input, offers a power factor above 0.94, and is PWM dimmable with compatible dimmers and drivers. The white trim measures 4.72" (120 mm) in diameter with a panel depth of only 0.47" (12 mm). It is cETLus certified and approved for damp locations, with a 3-year warranty. SKU: LCDL-DLF4-24V-2CCT-WH.

Where does it shine? Under-cabinet and over-counter lighting in kitchens, corridors and stairwells, closets, basements, garages, boutique display ceilings, cottage and chalet ceilings across Canada, and any 12V or 24V system in a van, RV, marine cabin or solar-powered off-grid camp. It needs a compatible low-voltage power supply, so check your total load before wiring several units on one transformer and keep runs short to limit voltage drop. Planning a mixed layout? Pair it with the 12V version, the 12/24V LED recessed 4'' DLF flat 8W, or step up to line-voltage rooms with the round commercial LED recessed 4''. Order yours and get that flush, modern ceiling you've been picturing.

Built flat on purpose
The whole point of this slim LED recessed downlight is thickness — or rather, the lack of it. With a panel depth of only 0.47" (12 mm) and a panel diameter of 4.72" (120 mm), it sits nearly flush with the finished ceiling and needs almost no plenum behind it. That makes it the practical answer where a traditional can simply will not fit: under a stair landing, in a dropped soffit, inside a cabinet valance, in a van conversion roof, or in a boat cabin where every millimetre of headroom counts. The white trim blends into painted drywall, MDF and plywood ceilings, and the diffused lens hides the diodes so you see light, not pinpoints.

Light quality you can live under
Output is rated at 600±50 lumens from an 8W LED engine, spread through a 120° beam angle for wide, even coverage. A CRI greater than 80 renders colours honestly — helpful over a cutting board, a bathroom mirror, a retail shelf or a workbench. The 2 colour temperature settings let you choose 3000K warm white for living areas, bedrooms and hospitality spaces, or 5000K cold white for kitchens, workshops and task zones, so one SKU can serve an entire project and you can fine-tune each room on site instead of guessing at the order desk.

Technical specifications
Model: LCDL-DLF4-24V-2CCT-WH
Power: 8W
Lumens: 600±50 LM
Colour temperature: 3000K / 5000K tunable
CRI: >80
Beam angle: 120°
Input voltage: 12/24V
Power factor: >0.94
Dimming: PWM
Trim colour: White
Panel diameter: 4.72" (120 mm)
Panel depth: 0.47" (12 mm)
Location approved: Damp location
Certification: cETLus
Warranty: 3 years

Wiring, dimming and installation
This is a low-voltage luminaire: it must be fed by a compatible 12V or 24V power supply, never wired directly to the 120V line. Add up the wattage of every fixture on the circuit before choosing your transformer, leave headroom, and keep cable runs short with adequate gauge so the last light on the chain is as bright as the first. Dimming is PWM, so use a dimmer and driver combination designed for PWM control on low-voltage LED panels. Cut a clean, correctly sized ceiling opening so the trim lands flush, connect the fixture to the driver lead, tuck the connection neatly into the cavity, and press the panel home. Always cut power at the panel first, and for permanent building wiring have a licensed electrician do the connection — good practice everywhere in Canada. The damp-location approval means it tolerates humidity in a covered porch ceiling, a bathroom ceiling outside the shower zone or a laundry room, but it is not made for direct exposure to rain.

Applications and documentation
Typical projects: kitchen and island ceilings, corridors in condos and small offices, display ceilings in boutiques and salons, cottage bunkies, garages and workshops, RV and trailer interiors, marine cabins and solar off-grid cabins. In a line-voltage renovation, keep the same clean look by combining rooms with the round commercial LED recessed 6'' or the larger round commercial LED recessed 10'', and use the linear LED recessed for cabinetry and shelf accents. The full technical spec sheet — dimensional drawing, colour temperature settings and driver connection diagram — is in the Documentation tab, so your electrician has everything needed before the first hole is cut.

Technical Files