LED STRIP 9.6W/M - LCLS24V-48W-27K-IP66-30M

Name: LED STRIP 9.6W/M - LCLS24V-48W-27K-IP66-30M
Brand: LEDCO
SKU: LCLS24V-48W-27K-IP66-30M
Price: 514.97 CAD
Availability: InStock

SKU: LCLS24V-48W-27K-IP66-30M

Brand: LEDCO

Some projects just need a clean, continuous line of light — and that's exactly what this LED strip delivers. Known on job sites and in search bars as LED strip lighting, LED light strips, LED tape or simply strip lights, this 24V flexible ribbon hides under cabinets, inside coves, along stair nosings and behind headboards to give a room that soft, glare-free glow no fixture can imitate. It's the go-to solution for kitchen under-cabinet lighting, bathroom vanity accents, cove and ceiling perimeter lighting, closet and pantry shelving, retail display cases and reception desks — anywhere you want to see the light and not the source. The 2700K version (SKU LCLS24V-48W-27K-IP66-30M) puts out a warm, candle-like white that flatters wood, stone and skin tones, making it a favourite for homes, restaurants and boutiques.

Under the silicone you get serious hardware: Epistar 2835 SMD chips packed at 128 LEDs per meter, drawing 9.6W/m ±10% at an efficiency of 130 lm/W. The tight LED spacing plus a 120º beam angle means smooth, even light with far fewer hot spots and dots — especially when paired with a diffused aluminum profile. Colour rendering is CRI 90+, so countertops, fabrics, paint and merchandise look the way they should. It runs on safe 24V DC, is dimmable for full mood control, and is built on an 8 mm wide PCB with 3 oz copper for better heat management and colour stability over time. Cut it to size every 62.5 mm (8 LEDs), run up to a maximum length of 10 m per feed, and count on 50,000+ hours of service. It is UL listed and rated IP66 for protection against dust and water jets.

From a Montréal basement reno to a café counter in Calgary, this strip earns its place: toe-kicks, floating shelves, crown-moulding coves, garage workbenches, bar fronts, display cabinets and damp-prone spots where the IP66 rating brings peace of mind. Pair it with a 24V DC driver sized to your total run and an aluminum channel with diffuser for a finished, pro-looking installation. Want the same 9.6W/m LED strip in another white? Compare the LED strip 24V 9.6W/m IP22 (30K), LED strip 24V 9.6W/m IP22 (40K) or the wet-location LED strip 9.6W/m 24V 48W 30K IP66. Map your run, choose your white, and light it right.

Built to last, not just to glow
This LED tape light is engineered around Epistar 2835 SMD diodes mounted on an 8 mm wide PCB with 3 oz copper. That heavier copper layer is the detail installers appreciate: it pulls heat away from the diodes, which protects lumen output and colour consistency over the long haul. With 128 LEDs per meter, the dots sit close enough together to blend into a near-continuous line, particularly behind a frosted lens. The strip carries an IP66 protection rating, so dust and water jets aren't a problem, and it's UL listed for confident specification on residential and commercial jobs.

Light quality you can actually see
At CRI 90+, this 2700K LED strip renders colour honestly — quartz veining, walnut grain, leather, produce and printed packaging keep their true character instead of going flat or grey. The 2700K tone is the warmest white of the family, close to incandescent, which is why designers reach for it in living rooms, bedrooms, restaurants and hospitality spaces. The 120º lighting angle spreads light wide and evenly, so a single run in a cove or under a cabinet washes the surface below instead of drawing a hard stripe. Efficiency lands at 130 lm/W for a bright result from a modest 9.6W/m draw.

Technical specifications
Product code: LCLS24V-48W-27K-IP66-30M
Chip: Epistar 2835 SMD
LEDs per meter: 128 pcs
Power: 9.6W/m ±10%
Efficacy: 130 lm/W
CRI: 90+
Colour temperature: 2700K
Lighting angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 8 mm
PCB thickness: 3 oz
Max length: 10 m
Cut size: 62.5 mm (8 LEDs)
Protection rating: IP66
UL: Yes
Lifespan: 50,000+ hours

Wiring, cutting and installation
The strip runs on 24V DC, which means a low-voltage power supply is required — size it to your total metres multiplied by 9.6W/m, and keep headroom rather than loading a driver to its limit. Respect the 10 m maximum length per feed; longer layouts should be split into separate runs fed from the source to avoid voltage drop and a dim tail end. Cut only on the marked cut points every 62.5 mm (8 LEDs), then solder or use a compatible connector. Because it's dimmable, you can pair it with a compatible low-voltage dimming system for everything from full task brightness to a late-evening glow. For a clean finish and better heat transfer, mount the tape inside an aluminum extrusion with a diffuser — it hides the dots, protects the strip and gives edges a crisp architectural line.

Where it works and what pairs with it
Think kitchen under-cabinet and toe-kick lighting, bathroom mirror surrounds, closet shelving, cove and tray ceilings, stair and hallway guidance, basement bars, bookcases, retail display cases, jewellery counters, reception desks and restaurant banquettes. If your project needs a different white or a different output, the same platform is offered as LED strip 24V 9.6W/m IP22 (27K), LED strip 24V 9.6W/m IP22 (35K) and LED strip 24V 9.6W/m IP22 (50K); step down to the LED strip 4.8W/m 24V 24W 30K IP66 for accent-level light or up to the LED strip 19.2W/m 24V 96W 30K IP66 for high-output coves. The technical spec sheet for this product is available in the Documentation tab for your submittals and electrical plans.

Technical Files