LED STRIP 9.6W/M - LCLS24V-48W-27K-IP22-30M

Name: LED STRIP 9.6W/M - LCLS24V-48W-27K-IP22-30M
Brand: LEDCO
SKU: LCLS24V-48W-27K-IP22-30M
Price: 403.97 CAD
Availability: InStock

SKU: LCLS24V-48W-27K-IP22-30M

Brand: LEDCO

Soft, continuous, flicker-free light exactly where you want it — that's what a good LED strip does, and this 24V tape is built to do it for years. Known by plenty of names — LED strip lights, LED light strips, LED tape, ribbon light or simply strip lighting — this warm 2700K version (SKU LCLS24V-48W-27K-IP22-30M) is the go-to for under-cabinet lighting, cove and tray ceilings, toe-kicks, closets, display cases, stair nosings, headboards, bar backs and shelving. It hides in a channel or behind a valance and turns a plain surface into a glow, without a single visible fixture. Homeowners use it to finish a kitchen or basement renovation; contractors and small businesses use it to add polish to reception desks, retail displays and restaurant millwork.

Under the silicone-free top you get Epistar 2835 SMD chips, 128 pcs per meter, drawing 9.6W/M ±10% at 24V DC for a smooth, dot-free line of light. Efficiency sits at 130 LM/W and the CRI is 90+, so wood grain, paint, skin tones and merchandise all look true — a big deal in kitchens, bathrooms and retail. The 120º beam spreads light evenly, the 2700K colour temperature stays cozy and warm, and the strip is fully dimmable when paired with a compatible 24V dimming system. The PCB is 8 mm wide with a 3 oz. copper build for better heat management, cuttable every 62.5 mm (8 LEDs), with a max run length of 10 m. It carries an IP22 rating for dry indoor use, is UL listed, and is rated for 50 000+ hours of life.

This is the tape for Canadian homes and businesses where warm light matters: kitchen under-cabinets, cove lighting in a living room, basement stairs, bathroom vanities, hotel corridors, boutique shelving, café counters. Pair it with a 24V DC power supply sized for your run, an aluminum profile with diffuser for a clean finish, and a compatible dimmer. Need a different look? The same strip is offered in LED strip 24V 9.6W/m IP22 3000K, 4000K and 5000K, and in a damp/wet-ready IP66 version. Plan your run, order your length, and light it up.

Built for a clean, even line of light
This LED tape light uses Epistar 2835 SMD chips at a density of 128 LEDs per meter on an 8 mm wide PCB. That tight LED spacing is what kills the "dotting" effect you see on cheaper LED strip lighting when it sits close to a diffuser or a wall. The circuit board uses 3 oz. copper, which helps pull heat away from the diodes — the single biggest factor in how long a strip keeps its brightness and colour. Rated life is 50 000+ hours.

Light quality you can actually see
At 2700K, the light is warm and residential — the tone people associate with a comfortable kitchen, a cozy living room or a hospitality space. Efficiency is 130 LM/W and the CRI 90+ rendering means colours stay honest: white cabinets read white, walnut reads walnut, and merchandise on a shelf looks like it does in daylight. The 120º lighting angle spreads the output wide, so a single run inside a cove or an aluminum channel washes a surface smoothly instead of throwing a hard stripe.

Technical specifications
Product code: LCLS24V-48W-27K-IP22-30M
Chip: Epistar 2835 SMD
LEDs per meter: 128 pcs
Power: 9.6W/M ±10%
Efficacy: 130 LM/W
CRI: 90+
Colour temperature: 2700K
Lighting angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 8 mm
PCB thickness: 3 oz.
Max length: 10 m
Cut size: 62.5 mm (8 LEDs)
Protection rating: IP22
UL: Yes
Lifespan: 50 000+ hours

Wiring, dimming and installation
The strip runs on 24V DC, so it needs a constant-voltage 24V driver or power supply with enough capacity for the total wattage of your run — count 9.6W/M of installed tape, plus headroom. Respect the 10 m maximum run length per feed; for longer installations, feed additional sections from the source rather than extending end to end, which prevents voltage drop and the dimming-at-the-far-end look. Cut only on the marked cut points every 62.5 mm (8 LEDs), then solder or use a quality connector. The strip is dimmable through a compatible 24V DC dimming setup (PWM or the dimming input on a dimmable driver). With an IP22 rating, install it in dry indoor locations; for damp, splash-prone or outdoor work, choose the IP66 version instead. Mounting it in an aluminum extrusion with a frosted lens is strongly recommended — it diffuses the LEDs, protects the tape and acts as a heat sink.

Where it works and what goes with it
Concrete examples: a warm glow under upper kitchen cabinets for prep work, cove lighting around a living-room tray ceiling, a lit toe-kick in a mudroom, shelf lighting in a boutique or wine cellar, backlit millwork at a reception desk, stair and corridor accents in a condo or hotel. In the same family you'll find lower and higher outputs and other looks: LED strip 4.8W/m 24V IP22 for subtle accents, LED strip 19.2W/m 24V IP66 when you need serious punch, tunable white CCT LED strip 20W/m for adjustable colour temperature, and RGB LED strip 14.4W/m 24V IP22 for colour-changing effects. The full technical PDF for this model is in the Documentation tab — download it before you spec your driver and profile.

Technical Files