LED STRIP 4.8W/M - LCLS24V-24W-30K-IP22-30M

Name: LED STRIP 4.8W/M - LCLS24V-24W-30K-IP22-30M
Brand: LEDCO
SKU: LCLS24V-24W-30K-IP22-30M
Price: 361.97 CAD
Availability: InStock

SKU: LCLS24V-24W-30K-IP22-30M

Brand: LEDCO

Soft, continuous light exactly where you want it: this LED strip is the easy way to add warm glow under cabinets, along coves, inside closets and behind headboards. Known as LED strip lighting, LED light strips, LED tape or ribbon light, it comes as a flexible roll you simply cut to length, stick down and power up. Homeowners use it for kitchen counters, stair nosings, bathroom vanities and ceiling coves; contractors and small businesses reach for it to light display cases, reception desks, shelving, bar fronts and retail millwork. Because it runs on low-voltage DC, it slips into tight spots where a regular fixture would never fit — and it delivers that clean, shadow-free line of light that makes a renovation look finished and professional. SKU LCLS24V-24W-30K-IP22-30M.

Under the silicone-free 8 mm PCB you get 64 Epistar 3528 SMD chips per meter drawing just 4.8 W/M, with an efficiency of 130 LM/W — plenty of output for accent and task lighting without the heat or the energy bill of halogen. The 3000K colour temperature gives a warm white that flatters wood, stone and skin tones, and the 90+ CRI keeps colours true, which matters a lot over a countertop, in a closet or in a retail display. The 120º beam angle spreads light evenly, the strip is fully dimmable, and it runs on 24V DC for long, low-loss runs up to a max length of 10 m. Cut size is 125 mm (8 LED), PCB thickness 3 oz., protection rating IP22, UL listed, with a lifespan of 50 000+ hours.

This indoor LED strip shines in kitchens, basements, home theatres, offices, boutiques, salons and restaurants — anywhere you want light without seeing the source. In Canadian homes it's a favourite for toe-kicks, cove ceilings and cold, dark hallways where recessed cans feel like overkill. Pair it with a 24V DC driver sized for your run, an aluminum channel with diffuser for a seamless line, and a compatible dimmer. Need another look? The same strip is offered in LED strip 2700K, LED strip 4000K and LED strip 5000K, or in a damp-ready IP66 version at 3000K. Roll it out and light your project right.

Built for clean, even lines of light
This LED tape light uses Epistar 3528 SMD chips mounted 64 per meter on a slim 8 mm PCB, so the dots blend quickly into a smooth line — especially behind a diffuser. The 3 oz. copper PCB helps carry current and pull heat away from the diodes, which is exactly what you want on long runs tucked into millwork. The adhesive-backed ribbon bends around corners and follows curves, and the 125 mm cut size (every 8 LED) lets you trim the roll to fit a cabinet, a shelf or a stair riser without wasting material. Maximum run length is 10 m per feed.

Light quality you can actually see
At 3000K, the light is a warm white that keeps kitchens, bedrooms and hospitality spaces feeling relaxed rather than clinical. The 90+ CRI rendering is the real difference-maker: food looks appetizing on a counter, wood grain keeps its depth, fabrics and paint colours read true in a boutique or showroom. With 130 LM/W of efficiency at only 4.8 W/M and a 120º lighting angle, you get soft, wide coverage for accent, cove and under-cabinet work without hot spots.

Technical specifications
SKU: LCLS24V-24W-30K-IP22-30M
Chip: Epistar 3528 SMD
LED per meter: 64 pcs
Power: 4.8W/M (±10%)
Efficacy: 130 LM/W
CRI: 90+
Colour temperature: 3000K
Lighting angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 8mm
PCB thickness: 3oz.
Max length: 10m
Cut size: 125mm (8 LED)
Protection rating: IP22
UL: Yes
Lifespan: 50 000+ hours

Wiring, dimming and installation
The strip operates on 24V DC, so it must be fed by a low-voltage LED driver/power supply matched to the total wattage of your run (length in meters × 4.8 W/M, plus headroom). Keep each feed under the 10 m maximum and run a new home run from the driver instead of daisy-chaining longer — that avoids voltage drop and the dimming-at-the-end effect. Cut only on the marked 125 mm points, then solder or use a quick connector, and mind the polarity. The strip is dimmable, so plan the control early: a compatible low-voltage dimming driver or an in-line DC dimmer gives you smooth control over cove and vanity lighting. Clean the surface before applying the adhesive backing, and mount inside an aluminum channel with a diffuser wherever the strip could be seen — it hides the dots and acts as a heatsink.

Where to use it, compatibility and documents
With its IP22 rating, this ribbon is made for dry indoor locations: under kitchen cabinets, above crown moulding, in coves and tray ceilings, inside pantries and closets, along shelving, under a bar top, behind a reception logo wall or inside retail display cases. For damp or splash-prone spots, step up to the sealed 3000K IP66 LED strip. Need more punch in the same warm 3000K? Look at the 9.6W/M strip or the high-output 28.8W/M strip. Want colour or tunable white on the same 24V platform? Consider the RGB LED strip IP22. The complete technical PDF spec sheet for this model is available in the Documentation tab for your submittals and installation planning.

Technical Files