LED STRIP 4.8W/M

Name: LED STRIP 4.8W/M
Brand: LEDCO
SKU: LCLS24V-24W-27K-IP22-30M
Price: 361.97 CAD
Availability: InStock

SKU: LCLS24V-24W-27K-IP22-30M

Brand: LEDCO

Soft, flattering light hiding exactly where you want it — that's what a good LED strip does, and this 2700K warm white tape is one of the easiest ways to get it. Sold as a 30-metre roll under SKU LCLS24V-24W-27K-IP22-30M, this is the product people search for as LED strip lights, LED light strips, LED strip lighting, LED lighting strips or simply strip lights — a flexible circuit board lined with tiny LEDs that you stick, clip or slide into an aluminum channel. It's made for cove ceilings, under-cabinet lighting in the kitchen, toe-kicks, bookshelves, closets, display cases, reception desks, stair nosings and backlit mirrors — anywhere you want the glow without seeing the source.

The numbers behind the glow: 4.8W per metre (±10%) drawn from a 24V DC supply, with 64 LEDs per meter using Epistar 3528 SMD chips and an efficacy of 130 LM/W. The warm 2700K colour temperature gives that relaxed, incandescent-like feeling, and a CRI of 90+ means wood grain, paint colours, food and skin tones all look true — a big deal over a kitchen counter or in a bathroom mirror. The 120º beam angle spreads light evenly, the tape is fully dimmable, and it is UL listed with a rated lifespan of 50,000+ hours. The PCB is 8mm wide with 3oz. copper, cuttable every 125mm (8 LED), with a maximum run of 10m per feed, and carries an IP22 rating for indoor, dry-location use.

This tape earns its keep in real Canadian projects: condo cove ceilings, basement renovations, restaurant bars and banquettes, boutique shelving, hotel corridors, clinic reception walls and home theatres. Contractors like the 30-metre roll because one spool covers a whole floor with fewer joints. Pair it with a 24V DC driver and an aluminum profile with diffuser to kill the dotting and protect the tape. Need a different mood or a damp spot? The same tape is offered in LED strip 24V 4.8W/m IP22 3000K, 4000K and 5000K, or step up to the IP66 version of the 4.8W/m strip for wetter areas. Roll it out and light your project right.

Built for clean, continuous light
This LED tape light is built on an 8mm wide PCB with 3oz. copper, a heavier copper weight that helps carry current and move heat away from the diodes along long runs. The emitters are Epistar 3528 SMD chips packed at 64 LEDs per meter, close enough spacing to read as a smooth line of light once it sits behind a diffuser. The strip is flexible, so it follows curves, coves and rounded millwork, and it can be cut to length every 125mm (8 LED) at the marked cut points — handy when a shelf, a stair or a cabinet run doesn't finish on a round number.

Light quality you can actually see
At 2700K, the light is warm and welcoming, closest to the incandescent look most homeowners still ask for in living rooms, bedrooms and hospitality spaces. What really sets this LED strip lighting apart is its CRI of 90+: colours stay honest, whites stay clean, and there's no muddy or greenish cast on countertops, fabrics or artwork. With 130 LM/W of efficacy and a 120º beam angle, you get wide, even coverage from a strip that only draws 4.8W per metre (±10%) — a fraction of what an old halogen or incandescent cove would burn, and cool enough to live comfortably inside millwork.

Technical specifications
SKU: LCLS24V-24W-27K-IP22-30M
Chip: Epistar 3528 SMD
LEDs per meter: 64pcs
Power: 4.8W/M ±10%
Efficacy: 130 LM/W
CRI: 90+
Colour temperature: 2700K
Beam angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 8mm
PCB thickness: 3oz.
Max length: 10m
Cut size: 125mm (8 LED)
Protection rating: IP22
UL: Yes
Lifespan: 50 000+ hours

Wiring, dimming and installation
This is a 24V DC low-voltage product, so it must be fed by a 24V DC LED driver or power supply sized for the total wattage of your run, plus headroom. Respect the max length of 10m per power feed; for longer installations, run a second feed from the driver rather than extending one continuous line, and use the 125mm cut marks whenever you shorten a section. The tape is dimmable when paired with a compatible dimming driver or in-line dimmer. Mount it on a clean, dry, degreased surface — an aluminum profile with a frosted lens is strongly recommended under cabinets and in coves, since it hides the diodes, protects the circuit and helps with heat. With an IP22 rating, keep it to indoor dry locations; for wet or washdown areas, choose an IP66 strip instead.

Applications, family and documentation
Think under-cabinet and under-counter lighting, cove and tray ceilings, pantry and closet shelving, headboards, backlit bathroom mirrors, retail display cases, bar fronts, restaurant banquettes and office reception walls — plus accent runs in basements and home theatres. The 30-metre roll keeps big jobs tidy with fewer splices. The same 4.8W/m platform is offered in 3500K neutral warm and 4000K if you need a crisper tone, while brighter rooms may call for the 9.6W/m strip or colour-changing work is handled by the RGB 14.4W/m strip. The full technical PDF (LCLS24V-24W-27K-IP22-30M Spec Sheet) is in the Documentation tab with dimensions, cut points and the complete colour temperature ordering guide.

Technical Files