LED STRIP 4.8W/M - LCLS24V-24W-50K-IP22-30M

Name: LED STRIP 4.8W/M - LCLS24V-24W-50K-IP22-30M
Brand: LEDCO
SKU: LCLS24V-24W-50K-IP22-30M
Price: 356.97 CAD
Availability: InStock

SKU: LCLS24V-24W-50K-IP22-30M

Brand: LEDCO

Bright, crisp and easy to hide — this is the LED strip that lets you light a room without a single visible fixture. Sold under model LCLS24V-24W-50K-IP22-30M, it's the kind of LED strip lighting people search for as led light strips, led lighting strips or led ceiling lights strip: a flexible 8 mm tape you tuck into a cove, under a cabinet, inside a bookcase or along a ceiling recess to create a clean, continuous line of daylight-white light. Whether you're finishing a basement, upgrading a kitchen, lighting a retail display or adding accent light to an office corridor, this 24V tape is the simple, low-profile answer.

Under the hood, it runs on 24V DC and draws 4.8W per metre (±10%) with an efficiency of 130 LM/W, so you get a lot of light for very little power. It packs 64 LEDs per meter using Epistar 3528 SMD chips, spreading light at a wide 120º beam angle for an even wash with no harsh hot spots. The 5000K colour temperature delivers a bright, energizing daylight tone, and a CRI of 90+ keeps whites clean and colours true — important over a counter, a vanity or merchandise. The tape is dimmable, is UL listed, carries an IP22 protection rating for dry indoor use, and is rated for 50 000+ hours of life. The PCB is 8mm wide with a heat-friendly 3oz. copper thickness, cuttable every 125mm (8 LED), with a max length of 10m per run.

It's a natural fit for kitchen toe-kicks and upper cabinets, cove ceilings in living rooms and condos, staircases, closets, garage workbenches, bar backs, reception desks and display shelving in Canadian homes and small businesses. Because it's an IP22 indoor tape, keep it dry and indoors — for damp or outdoor runs, look at the LED strip 4.8W/m 24V 24W 30K IP66 instead. Prefer a warmer glow? The same tape is offered in 2700K, 3000K and 4000K. Plan your run, grab a 24V power supply and start lighting.

Built to disappear into the design
This LED tape light is built on an 8mm wide flexible PCB with a 3oz. copper layer — a thicker copper base helps move heat away from the diodes, which matters on long continuous runs inside a cove or an aluminum channel. With 64 LEDs per meter of Epistar 3528 SMD chips spaced tightly along the tape, the light reads as a smooth line rather than a row of dots, especially behind a diffuser. Cut points are clearly marked every 125mm (8 LED), so you can size each section to the exact cabinet, shelf or ceiling detail you're lighting.

Light quality that flatters the room
At 5000K, the light is a clean daylight white — the tone most people want over work surfaces, in garages, in basements without much natural light, and in retail spaces where crispness sells. The CRI 90+ rendering keeps skin tones, wood grain, paint and packaging looking the way they should, and the 120º lighting angle spreads the output widely so a single strip can wash a whole backsplash or ceiling plane. Efficiency sits at 130 LM/W for a draw of only 4.8W/M, an easy way to cut energy use dramatically compared with old halogen or incandescent accent lighting.

Technical specifications
SKU: LCLS24V-24W-50K-IP22-30M
Chip: Epistar 3528 SMD
LEDs per meter: 64pcs
Power: 4.8W/M ±10%
Efficiency: 130 LM/W
CRI: 90+
Colour temperature: 5000K
Lighting angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 8mm
PCB thickness: 3oz.
Max length: 10m
Cut size: 125mm (8 LED)
Protection rating: IP22
UL: Yes
Lifespan: 50 000+ hours

Wiring, dimming and installation
The strip runs on 24V DC, so it needs a 24V driver or power supply sized for the total wattage of your run — add up the metres, multiply by 4.8W/M, and leave yourself headroom. Respect the max length of 10m per feed; for longer installations, run separate home-runs back to the supply rather than daisy-chaining past that limit, to keep brightness even end to end. The tape is dimmable through a compatible 24V dimming system, which is ideal for cove lighting you want bright for cleaning and soft for evenings. Its IP22 rating means dry interior locations only — kitchens, living areas, closets, offices and finished basements, not exposed exterior runs or showers.

Where it works and what's available
Think under-cabinet task light over a kitchen counter, crown-moulding cove light in a living room, shelf lighting in a boutique, display case lighting in a bakery, stair nosing in a duplex, or a bright, even band over a workbench. For damp or outdoor projects, the family includes IP66 versions such as the LED strip 9.6W/m 24V 48W 30K IP66; if you want colour or tunable white, there's the LED strip 14.4W/m 24V 72W RGB IP22 and the LED strip 20W/m 24V 100W IP22 CCT. Full details, dimensions and the colour temperature ordering guide are in the technical spec sheet available in the Documentation tab.

Technical Files