LED STRIP 28.8W/M - LCLS24V-144W-40K-IP22-30M

Name: LED STRIP 28.8W/M - LCLS24V-144W-40K-IP22-30M
Brand: LEDCO
SKU: LCLS24V-144W-40K-IP22-30M
Price: 718.97 CAD
Availability: InStock

SKU: LCLS24V-144W-40K-IP22-30M

Brand: LEDCO

Some rooms just need a line of light instead of another fixture on the ceiling — and that's exactly what this LED strip delivers. Sold as a 30 m spool under SKU LCLS24V-144W-40K-IP22-30M, this 24V LED strip lighting (also called LED tape, LED light strips or LED lighting strips) packs 280 LEDs per meter on a 10 mm board for a smooth, dotless line of light. It's the go-to for cove and ceiling lighting, under-cabinet and toe-kick lighting, shelving, bulkheads, stairs, display cases, closets, and backlit millwork — any place you want the glow without seeing the source.

This is a high-output LED strip at 28.8W per meter, running on 24V DC with an efficiency of 109 lumens per watt, so you get a genuinely bright, continuous line instead of a timid accent. The 4000K colour temperature gives you a clean, neutral white that keeps countertops, tile and stone looking crisp, and the CRI 80+ rendering keeps skin tones, wood grain and finishes looking natural. The 120º beam angle spreads light evenly along the run, the strip is fully dimmable, and the PCB uses a generous 3 oz. copper for better heat management over long runs. Cut size is 25 mm (7 LEDs), maximum run length is 10 m, protection rating is IP22 for dry indoor use, the strip is UL listed, and the rated lifespan is 50 000+ hours.

With 30 meters on a single spool, this reel is made for real projects: a whole kitchen renovation, a condo hallway, a restaurant bar, a retail display wall, an office reception desk, a salon, or a basement rec room in a Canadian home where daylight is scarce from November to March. Contractors love that one spool covers multiple rooms with matching colour, and homeowners love the finished, architectural look. Need the same output in a warmer tone? Have a look at the LED strip 24V 28.8W/m IP22 3000K, or shop the shorter format of this same strip, the LED strip 24V 28.8W/m IP22 4000K. Add a 24V DC driver and an aluminum profile, and your light line is ready to install.

Built for long, even runs
This LED tape light is built on a 10 mm wide printed circuit board with 3 oz. copper — a thicker copper layer than standard tape, which helps pull heat away from the diodes and keeps brightness and colour stable over time. With 280 LEDs per meter packed closely together, the result is a nearly dotless line of light, especially when the strip is used with a diffused aluminum profile. The 30 m spool means fewer joints, fewer solder points and fewer colour variations from batch to batch across a single job.

Light quality you can trust
At 4000K, you get a neutral white that reads clean and modern — ideal above counters, in cove ceilings and in retail displays where you want merchandise and materials to look true. The CRI 80+ rating keeps colours honest, and the 120º lighting angle throws a wide, even wash on the surface above or behind the strip. Because the strip is dimmable, you can dial the same run from full task-level output down to a soft evening glow using a compatible 24V dimming system.

Technical specifications
SKU: LCLS24V-144W-40K-IP22-30M
Number of LEDs per meter: 280 pcs
Power: 28.8W/M (±10%)
Efficacy: 109 LM/W
Colour temperature: 4000K
CRI: 80+
Lighting angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 10mm
PCB thickness: 3oz.
Max length: 10m
Cut size: 25mm (7 LEDS)
Protection rating: IP22
UL: Yes
Lifespan: 50 000+ hours

Electrical and installation notes
The strip runs on 24V DC, so it must be powered by a 24V DC driver sized for the load — remember the strip draws 28.8W per meter, so calculate your total run length before choosing a power supply, and respect the 10 m maximum run per feed to avoid voltage drop at the far end. Longer installations are simply fed from both ends or split into separate 10 m runs on the same driver. Cut only on the marked 25 mm (7 LEDs) points, mount on a clean, dry surface, and use an aluminum extrusion with a frosted lens wherever the strip is visible or installed against drywall — the channel acts as a heat sink and hides the diodes. The IP22 rating means this one is for dry indoor locations: no exterior runs, no showers, no direct water exposure.

Where it works and what pairs with it
Think kitchen valances and under-cabinet lighting, cove and tray ceilings in living rooms, floating vanities and mirror backlighting, staircase nosings, closet shelving, bar fronts, restaurant booths, reception desks, and retail shelf lighting. For the same output in a warmer tone, choose the LED strip 24V 28.8W/m IP22 3000K; this exact strip is also offered in a shorter format as the LED strip 24V 28.8W/m IP22 4000K. For projects needing a gentler accent line, the LED strip 24V 4.8W/m IP22 3000K shares the same 24V platform, and for colour-changing effects the RGB LED strip 14.4W/m 24V IP22 is also a 24V option. The complete technical PDF spec sheet is available in the Documentation tab for exact values, cut points and dimensions.

Technical Files