LED STRIP 28.8W/M

Name: LED STRIP 28.8W/M
Brand: LEDCO
SKU: LCLS24V-144W-30K-IP22-30M
Price: 718.97 CAD
Availability: InStock

SKU: LCLS24V-144W-30K-IP22-30M

Brand: LEDCO

Some rooms just need more light than a fixture can give — and that's exactly where this LED strip takes over. Sold as a 30 m roll, LCLS24V-144W-30K-IP22-30M is a high-output 24V DC LED strip light (also called LED tape, LED light strips or LED strip lighting) that delivers a clean, continuous line of warm 3000K light with 280 LEDs per meter. Because the chips are packed so tightly, you get a smooth glow instead of a row of visible dots — perfect for cove ceilings, under-cabinet runs, toe-kicks, stair nosings, display cases, shelving, backlit millwork and those long LED ceiling light strip details that make a renovation look custom.

This is the powerhouse of the family: 28.8W per meter at 109 lumens per watt, with a CRI of 80+ so wood, paint, fabric and food all keep their true colour. It runs on 24V DC, it is dimmable, and the 120º beam angle spreads light evenly across a ceiling pocket or a cabinet interior. The PCB measures 10 mm wide with 3 oz copper — heavier copper means better heat management over long runs. Cut size is 25 mm (every 7 LEDs), maximum run length is 10 m, protection rating is IP22 for dry indoor locations, it is UL listed, and rated life is 50,000+ hours.

Contractors reach for this tape on kitchen and bathroom renovations, basement remodels, condo lobbies, retail displays, restaurant bars, offices and boutique hotels — anywhere a Canadian project needs bright, even, low-profile lighting that hides completely in a channel or a drywall pocket. A 30 m roll covers a whole floor of cove detailing with far less splicing. Need the same performance in a cooler tone? Take a look at the LED strip 24V 28.8W/m IP22 (40K), or compare with the shorter-format LED strip 24V 28.8W/m IP22 (30K). For lower-output accent work, the LED strip 4.8W/m 24V IP22 (30K) is the gentle option. Plan your runs, add a 24V DC driver, and light it up.

Built for long, bright runs
Density is what separates a good LED strip from a disappointing one. This tape carries 280 LEDs per meter on a 10 mm wide PCB, which puts the diodes close enough together to blend into one continuous line of light, especially behind a diffuser. The circuit board uses 3 oz copper, a heavier copper weight that helps carry current and dissipate heat across long installations — a real advantage when you are pushing 28.8W per meter. The strip is flexible, it follows curves and inside corners, and it can be cut to size every 25 mm (7 LEDs) at the marked cut points.

Light quality you can trust
At 3000K, the light is a warm white that flatters wood cabinetry, warm paint tones and natural stone — the go-to temperature for kitchens, living areas, bedrooms and hospitality spaces. A CRI of 80+ keeps colours honest, and the 120º beam angle spreads light wide so a cove or cabinet interior washes evenly instead of showing hot spots. Efficacy is rated at 109 lumens per watt, which means a lot of usable light for the energy drawn — far less consumption than the halogen and xenon fixtures this kind of tape replaces.

Technical specifications
SKU: LCLS24V-144W-30K-IP22-30M
Product code: LCLS24V-144W-IP22
Power: 28.8W/M ±10%
LEDs per meter: 280 pcs
Efficacy: 109 LM/W
Colour temperature: 3000K
CRI: 80+
Beam angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 10mm
PCB thickness: 3oz.
Max length: 10m
Cut size: 25mm (7 LEDS)
Protection rating: IP22
UL: Yes
Lifespan: 50 000+ hours

Electrical and installation notes
This is a 24V DC product, so it requires a compatible 24V DC power supply sized for the total wattage of your run — at 28.8W per meter, load adds up quickly, so calculate before you buy the driver. Respect the 10 m maximum run length per feed and bring power from both ends or run parallel circuits on longer layouts to avoid voltage drop and colour shift at the far end. The strip is dimmable, so pair it with a dimming-capable 24V driver and control for cove lighting you can bring down in the evening. With an IP22 rating, it belongs in dry indoor locations; keep it out of showers, exteriors and other wet areas. Mounting it in an aluminum extrusion with a diffuser is strongly recommended at this power level — it protects the tape, spreads the light and helps with heat.

Where it works and what else to look at
Think perimeter cove lighting in a living room, under-cabinet task light in a kitchen, backlit bathroom mirrors and niches, illuminated shelving in a boutique, bar fronts and display cases in a restaurant, reception desks and corridor details in an office or condo lobby. Need a crisper, more neutral white for a workspace or commercial fit-out? The LED strip 24V 28.8W/m IP22 (40K) is the same platform at 4000K. For colour-changing accents on the same 24V system, see the LED strip 14.4W/m 24V 72W RGB IP22, or the tunable LED strip 20W/m 24V 100W IP22 (CCT). The complete technical PDF spec sheet for this model is available in the Documentation tab for your submittals and installation planning.

Technical Files