HANGING KIT FOR LED PANELS 1X4

Name: HANGING KIT FOR LED PANELS 1X4
Brand: LEDCO
SKU: LCPAN-KIT-SUSP-1X4-A
Price: 30.97 CAD
Availability: InStock

SKU: LCPAN-KIT-SUSP-1X4-A

Brand: LEDCO

Turn a flat LED panel into a floating light feature — no suspended ceiling required. This hanging kit for LED panels 1x4 (SKU LCPAN-KIT-SUSP-1X4-A) is the suspension accessory people look for when they search "kit de suspension pour luminaire", "cable luminaire suspension" or simply "led panel light hanging cables". It gives you everything you need to drop a 1x4 LED flat panel from a concrete slab, an exposed structure or a drywall ceiling, so the fixture hangs clean, level and at the height you actually want.

Designed specifically for the 1x4 LED panel format, this kit is a mechanical accessory: it holds and levels the panel, and the panel keeps its own wattage, colour temperature and certifications. Because it's sized for the 1x4 body, you don't have to improvise with generic chains or mismatched hardware — the anchor points line up with the panel and the cables let you adjust the drop on site, which is exactly what you need when ceiling heights change from one room to the next. It's the simplest way to convert a recessed or lay-in panneau LED into a suspended fixture without cutting a ceiling or building a frame.

Where does it shine? Open-plan offices with exposed ceilings, retail counters, clinics, classrooms, workshops, basement renovations, home offices and any Canadian commercial fit-up where the T-bar grid was never installed or was removed. Contractors like it for quick retrofits; homeowners like it because a suspended panel over a desk or kitchen island looks intentional. This kit fits 1x4 LED panels only — for other formats, see the Hanging kit for LED panels 2x2 or the Hanging kit for LED panels 2x4, and if you're surface-mounting instead of suspending, look at the Mounting kit for multi watt LED panels. Add it to your order with your panels and hang them the same day.

What this kit actually does
A LED panel is built to sit in a T-bar grid or to be recessed into drywall. When neither option exists — exposed concrete, open joists, a ceiling you don't want to cut — you need a suspension solution. That's the whole job of this hanging kit for LED panels 1x4: it attaches to the panel's mounting points and suspends it from the structure above with adjustable cables, so the fixture floats at the height you choose. It's a purely mechanical accessory, sold separately from the panel itself, which means you can specify the panel you want (wattage, colour temperature, dimming) and simply choose the mounting method afterward.

Sized for the 1x4 format
This version is dedicated to 1x4 LED panels — the long, narrow format used over corridors, desks, reception counters, kitchen islands and retail aisles. Using hardware matched to the panel size matters more than people think: the attachment points land where the panel is reinforced, the load is shared evenly, and the fixture hangs flat instead of dipping at one end. If your project mixes formats, the same family covers 2x2 and 2x4 panels, so you can keep one consistent look across a whole floor.

Installation tips
Plan your two suspension points along the length of the panel and anchor them into solid structure — joists, strut channel or a properly rated concrete anchor. Measure your drop from the finished ceiling, not from the slab, and set both cables to the same length before you lift the panel; adjusting after the fact is far easier when the panel is lightly loaded rather than fully tightened. Leave enough slack in the supply wiring to follow the drop, run it neatly along one cable or through a separate conduit, and always make the electrical connection according to the Canadian Electrical Code and your local inspector's requirements. A second pair of hands makes the job much faster on a 4-foot panel.

Where it gets used
Open-ceiling offices and co-working spaces where ductwork is exposed, boutiques and showrooms that want a linear light line over displays, clinics and waiting rooms, school and training rooms, garages, workshops and home basements with low-clearance beams. Suspending a flat panel LED also helps when a ceiling is too irregular for a clean recessed cut, or when you want the light source closer to the work surface for better task lighting without changing the fixture's output.

Compatibility and documentation
This kit is intended for 1x4 LED panels only. For other sizes and mounting styles in the same family, see the Hanging kit for LED panels 2x2, the Hanging kit for LED panels 2x4, the Hanging kit for multi watt LED panels, or the surface-mount option, the Mounting kit for radio frequency LED panels. No spec sheet is published for this accessory; if you're unsure which kit matches your panel, check the panel's format and mounting holes before ordering. SKU LCPAN-KIT-SUSP-1X4-A — suitable for residential and commercial projects.