HANGING KIT FOR LED PANELS 2X2

Name: HANGING KIT FOR LED PANELS 2X2
Brand: LEDCO
SKU: LCPAN-KIT-SUSP-2X2-A
Price: 19.97 CAD
Availability: InStock

SKU: LCPAN-KIT-SUSP-2X2-A

Brand: LEDCO

Turn a flush-mounted LED panel into a suspended fixture in minutes. This hanging kit for LED panels 2x2 (SKU LCPAN-KIT-SUSP-2X2-A) is the accessory you need when there is no T-bar grid to drop the panel into, or when you simply want the light closer to the work below. People search for it as a suspension kit for light fixture, a cable suspension kit, a hanging cable kit or a panel suspension kit — it is the set of cables and hardware that holds a square LED flat panel below the ceiling instead of tight against it. It answers a very common problem on job sites: the panel is bought, the ceiling is concrete, wood, exposed joists or already finished, and the fixture has to hang. Homeowners renovating a basement or garage, contractors finishing an open-ceiling office and small business owners relighting a shop all end up needing the same thing.

The kit is designed for the 2x2 LED panel format, so the suspension points line up with the panel's own mounting holes and the fixture hangs square and level instead of twisting on a diagonal. Because it is a dedicated accessory rather than a universal improvisation, you skip the hunt for chain, wire and screws at three different counters, and you avoid the crooked panel that never quite looks right. Note that this is a mounting accessory only: it produces no light on its own and carries no wattage, lumen or colour temperature rating — all of the light output, dimming and electrical characteristics come from the LED flat panel you pair it with, so refer to that fixture's own specifications for those values.

It shines wherever a square panel has to be dropped from a high or unfinishable ceiling: open-concept basements, garages and workshops, warehouse mezzanines, storage rooms, salons, clinic corridors, classrooms, offices with exposed structure, and any Canadian renovation where the old drop ceiling came out and the new lighting still has to go in. Pair it with a 2x2 panel from our catalogue, or compare it with the hanging kit for LED panels 1x4 and the hanging kit for LED panels 2x4 if your project uses other panel sizes. Need the panel tight to the ceiling instead? Look at the mounting kit for radio frequency LED panels. Add this kit to your order with your panels and hang them the same day.

What this kit does
A flat LED panel is made to sit in a suspended ceiling grid or to be screwed flat to a surface. When neither is possible — or desirable — a hanging kit takes over. This accessory provides the suspension hardware that attaches to the panel's existing mounting points and lets the fixture hang freely below the structure, fed by the panel's own driver and supply wire. The result looks intentional: a clean square of light floating over a desk, a bench or a counter, with the ceiling left completely untouched around it.

Sized for the 2x2 format
This version is matched to the 2x2 LED panel, the square format used constantly in offices, retail and institutional spaces. Because the kit is made for that footprint, the attachment points align with the panel frame, which keeps the fixture level and stops the slow sag you get when a square panel is hung from improvised points. If your project uses rectangular panels instead, the family includes versions sized for 1x4 and 2x4 panels, so a mixed installation can still be suspended with matching hardware throughout.

Installation notes
Plan the suspension before the panels arrive on site: locate solid anchoring in joists, concrete or structural steel, keep the hanging points square to each other so the panel does not rack, and leave enough slack in the supply wire that the cable, not the wiring, carries the weight. Hang a row of panels at a consistent height to the same reference line and the ceiling reads as a designed lighting plan rather than a set of one-off fixtures. All electrical connections must respect the Canadian Electrical Code and local requirements, and the panel itself should be installed according to the instructions supplied with that fixture.

Where it earns its keep
Think of the basement renovation with exposed joists where nobody wants to lose head height to a full drop ceiling, the two-bay garage or home workshop where light needs to come down closer to the bench, the warehouse office with an open structural deck, the storage mezzanine, the church hall, the classroom, the salon or the clinic corridor where a suspended square of soft light reads far better than a bare surface fixture. Contractors also use hanging kits to rescue a spec change: the panels were ordered for a grid ceiling, the grid got cut from the budget, and the fixtures still have to go up this week.

Technical specifications
SKU: LCPAN-KIT-SUSP-2X2-A
Type: hanging / suspension kit, accessory for LED panels
Designed for: 2x2 LED panels
Applications: residential and commercial projects
Since this is a mounting accessory, it has no wattage, lumen output, colour temperature, CRI or IP rating of its own — those values belong to the LED flat panel you suspend with it. No spec sheet, IES file or installation video is listed in the Documentation tab for this item; for photometric and electrical data, consult the documentation of the panel itself. Complete your order with the hanging kit for LED panels 1x4, the hanging kit for LED panels 2x4 or, for surface installation, the mounting kit for multi watt LED panels.