MOUNTING KIT FOR RADIO FREQUENCY LED PANELS - LCPAN-KIT-MONT-2X4-A

Name: MOUNTING KIT FOR RADIO FREQUENCY LED PANELS - LCPAN-KIT-MONT-2X4-A
Brand: LEDCO
SKU: LCPAN-KIT-MONT-2X4-A
Price: 53.97 CAD
Availability: InStock

SKU: LCPAN-KIT-MONT-2X4-A

Brand: LEDCO

Your 2x4 LED panel doesn't have a grid ceiling to sit in? No problem. This surface mounting kit is the missing piece that lets you install a 2x4 LED panel directly against drywall, plaster or concrete, exactly where a T-bar ceiling simply isn't an option. Known as a surface mount frame, a LED panel mounting kit or a mounting bracket kit, it's made for radio frequency LED panels in the 2x4 format — the same flat, glare-free LED ceiling light panels people search for as 2x4 drop ceiling light panels, but reinvented for solid ceilings. Model LCPAN-KIT-MONT-2X4-A.

This is an accessory, so what matters is the fit and the finish: it's sized for the 2 ft x 4 ft panel format and designed to marry the panel's own profile so the finished installation reads like a built-in fixture rather than a box screwed to the ceiling. The frame holds the panel square, hides the mounting hardware and gives the edges a clean, continuous line — no sagging corners, no visible gaps, no improvised wood blocking. Because the kit does nothing to the panel's electronics, you keep every feature of your radio frequency LED panel exactly as it was: same light output, same controls, same driver. You simply change where and how it lives. Designed for both residential and commercial projects, it's the straightforward answer for renovations where the ceiling is closed and the client still wants that big, soft sheet of light.

Contractors reach for this kit in basements with low headroom, condo hallways, retail back rooms, clinics, classrooms, garages, offices carved out of older Canadian buildings and anywhere a suspended ceiling was never installed or was removed during the reno. Match it to your 2x4 radio frequency panel; for other formats, see the Mounting kit for radio frequency LED panels 2x2, and if you'd rather hang the panel from the deck, the Hanging kit for LED panels 2x4 gives you the cable-suspended look. Add it to your order with the panel and install both in one trip.

What this kit actually does
A flat LED panel is engineered to drop into a T-bar grid, resting on the tees with nothing more than gravity and a safety clip. Take the grid away and the panel has no way to attach to anything. That's the gap this surface mount kit fills: it creates a rigid perimeter frame around the panel and gives you fixing points on a solid ceiling — drywall, plaster, wood or concrete — so the fixture sits tight, flat and level. It converts a recessed grid panel into a surface mounted LED panel without modifying the light engine, the driver or the diffuser in any way.

Technical specifications
SKU / model: LCPAN-KIT-MONT-2X4-A
Type: Surface mounting kit (accessory)
Panel format: 2x4
Compatibility: Radio frequency LED panels, 2x4 format
Applications: Residential and commercial projects

Installation, step by step
The work is simple and fast, which is exactly why crews like it. Locate your ceiling joists or strapping and mark the frame position; bring the supply wiring through to where the panel's driver will sit; assemble the frame around the panel; then fasten the assembly to the ceiling and make your connections in the junction box as required by the Canadian Electrical Code. Because the frame carries the panel's weight along its full perimeter, you avoid the bowing you get when a large panel is screwed only at the corners. Always cut power at the breaker before you start, and confirm your fastener choice suits the ceiling substrate — toggle or self-drilling anchors in hollow drywall, screws into wood framing, appropriate anchors in concrete.

Compatibility and the rest of the family
This kit is format-specific and technology-specific: it is intended for radio frequency LED panels in 2x4. Order the kit that matches the panel you already have — for 2x2 radio frequency panels, use the Mounting kit for radio frequency LED panels 2x2. If your panels are from the multi-watt line instead, the matching accessories are the Mounting kit for multi watt LED panels 2x4 and the Mounting kit for multi watt LED panels 1x4. Prefer a suspended, pendant-style installation over open work areas? The Hanging kit for LED panels 2x4 hangs the same panel from cables at the height you choose.

Where it earns its keep
Think finished basements and rec rooms where every inch of headroom counts, laundry rooms, home offices, garages and workshops; then commercially, think clinics and dental offices, salons, daycares, small warehouses, corridors, storage rooms and retail spaces in older brick-and-beam buildings where a drop ceiling would eat the character or the clearance. In new builds it's just as useful on the one ceiling that got drywalled while the rest of the floor stayed in grid, so your lighting stays visually consistent from room to room. No spec sheet or IES file is published for this accessory — the photometric data you need lives with the LED panel itself, since this kit changes only the mounting method, never the light.