Built to last, built to disappearThe FIT fixed track is made of iron with a ceramic socket housing — a combination that handles heat from lamping far better than all-plastic spot bars. The sand white finish has a soft, matte look that hides fingerprints and melts into a white ceiling, so the eye sees the light and not the hardware. The head pivots so you can aim the beam where the merchandise, the artwork or the countertop actually is, and the whole assembly mounts flat to the surface: no ceiling cut-out, no plenum depth, no insulation contact questions.
Light quality is yours to chooseBecause this is a
GU10 socket fixture with the bulb not included, you control the colour temperature, the beam angle and the output by choosing the lamp. A warmer
GU10 LED suits a living room, a boutique or a restaurant; a cooler one sharpens a kitchen, a workshop or a display case. Want a tighter accent beam on a painting? Choose a narrow-beam MR16-shape lamp. Want general fill? Go wider. If your needs change or LED technology improves, you change a bulb instead of a fixture — that flexibility is the whole point of
track lighting heads.
Technical specificationsModel number: FIT-SM/TRK/GU10/1H/WH
Fixture type: Surface Mount Fixed Track
Mounting: Surface
Heads: 1
Bulb base: GU10
Recommended bulb shape: MR16 (GU10)
Bulb included: No
Voltage: 120V
Maximum wattage per bulb: 50W
Material: Iron + ceramic
Finish: Sand White
Dimensions: 80 mm (3.15 in) and 508 mm (20 in)
Location: Damp, indoor use only
Working temperature: -40°C~65°C
Included: 1 suction cup for easy bulb installation and replacement
Warranty: 2-year limited
Installation and electrical notesThis is a line-voltage
120V fixture, so it wires directly to a standard residential or commercial branch circuit — no low-voltage transformer, no driver to fail. Mount it on drywall, plaster, wood or concrete ceilings and walls, and on vertical surfaces where a wall spot makes more sense than a downlight. Dimming behaviour depends entirely on the GU10 lamp you install: if you want it on a dimmer, choose a lamp marked dimmable and confirm the control is compatible with that lamp. Keep the total load at or below the 50W maximum per bulb, and use the included suction cup to seat and remove the lamp cleanly without smudging the reflector. It is rated for indoor use only, including damp locations.
Where it works and what pairs with itThink of it as the smallest building block of a
surface mount lighting plan: one over a reading chair, a row of them over a bar, a pair aimed at a feature wall, or one per shelf bay in a boutique. On larger runs, step up to the
2-head white track or the
4-head white track, or mix in the
3-head black track for a two-tone ceiling. For hanging accents in the same FIT family, the
FIT cylinder pendant with GU10 socket in white uses the same GU10 lamps, so one box of bulbs serves the whole room. The full technical PDF spec sheet for this model is available in the Documentation tab for your submittals and permit package.
