24V 5M IP65+ HIGH OUTPUT RGB 5050 LED STRIP KIT - 30 LEDS/M

Name: 24V 5M IP65+ HIGH OUTPUT RGB 5050 LED STRIP KIT - 30 LEDS/M
Brand: LED MONTREAL
SKU: 2R30X0K-IP65
Price: 69.97 CAD
Availability: InStock

SKU: 2R30X0K-IP65

Brand: LED MONTREAL

Colour that shrugs off splashes, steam and humid summer nights: the 24V 5M IP65+ High Output RGB 5050 LED Strip Kit - 30 LEDs/M by LED MONTREAL is the waterproof edition of this complete colour-changing kit. If you're looking for waterproof LED strip lights, outdoor RGB LED light strips, colour-changing LED tape or a plug-and-play LED strip kit, this box has it all: a 5-metre RGB strip on a reel, a plug-in power supply, and an infrared remote with its receiver. Use it to outline a covered patio, a gazebo, a cabana bar, a bathroom niche or a basement wet bar, anywhere a bare indoor strip would be at risk from moisture.

Each 5050 RGB chip packs a red, a green and a blue diode, so a single run of tape can blend a wide palette of colours, laid out at 30 LEDs per metre in a high-output configuration. The IP65+ protection seals the LEDs against moisture and dust, while the 24V DC low voltage moves the same power with less current than lower-voltage tape, which helps keep the colour even all the way to the end of the reel. From the remote, set a solid colour or let the controller run flash, strobe, fade and smooth colour-change patterns at the speed you like. Keep in mind that RGB mixing does not produce a true white.

Across Canada, it's a natural outdoor LED strip for screened porches, covered decks, pergolas under a roof, boathouses, spa rooms and restaurant terraces, as well as bathrooms and laundry rooms where condensation is a given. Plan a dry, sheltered spot near an outlet for the plug-in power supply and the receiver, since only the strip carries the waterproof protection, and favour covered locations over fully exposed ones when winter comes. Order SKU 2R30X0K-IP65, plug it in, and give your evenings outside a splash of colour.

Everything in one box
This kit removes the guesswork of matching parts. The waterproof RGB LED strip arrives with a plug-in power supply whose DC connector clips straight into the controller, plus an infrared remote, its receiver and the remote's battery. Plug the supply into an outlet, connect the strip to the controller, and you're changing colours in minutes, with no driver to source. An RGB strip uses a dedicated colour connection, which is why it always runs through an RGB controller like the one supplied here.

Colour effects and the infrared remote
Inside every 5050 chip, red, green and blue light sources sit side by side, and the controller mixes them into solid colours or animated effects (flash, strobe, fade and smooth colour change), each with an adjustable speed. Because the remote works by infrared, the receiver must be within its line of sight; leave it visible on a shelf edge, behind a valance with an opening or just inside a doorway, and keep it, like the power supply, out of the rain. At 30 LEDs per metre in a high-output layout, the strip lays a lively, saturated wash on walls, ceilings, railings and fascia boards.

Kit specifications
Reel length: 5 m
Operating voltage: 24V DC
Protection rating: IP65+
LED chip: 5050 RGB
Density: 30 LEDs/m
Output: high output
Brand: LED MONTREAL

Installing in damp and outdoor spots
Plan the run before you peel anything. Make cuts exclusively at the printed cutting points, and remember that any cut end of a waterproof strip has to be sealed again to keep its protection. The tape flexes up and down but must not be bent sideways, so turn corners with a short soldered RGB jumper wire or a suitable connector. The adhesive backing grips best on clean, non-glossy metal and is not reliable on varnished or glossy wood, which is why an aluminum channel makes the best base, both for adhesion and for a clean, diffused line of light. Route the lead so water runs away from the connections, and add clips outdoors rather than trusting adhesive alone.

Where it works best
Covered patios and pergolas, screened porches, gazebo rafters, under-deck stair edges, boathouse eaves, bathroom and spa niches, terrace bar counters, café patios and shop windows that fog up in winter. Contractors like it for clients who want colour in a humid space without building custom enclosures; homeowners like that it's a single kit with one plug. For a dry living room or bedroom, the indoor version of this kit does the same job; either way, an RGB strip kit sets a mood in seconds.