icon-info 0
No products in the cart.
  • fr
    • Back to Products
    FR
    0
    No products in the cart.
    Menu Search Cart
    SWIVEL PIPE WITH MICROWAVE MOTION SENSOR FOR AW AND WP
    SWIVEL PIPE WITH MICROWAVE MOTION SENSOR FOR AW AND WP

    SWIVEL PIPE WITH MICROWAVE MOTION SENSOR FOR AW AND WP

    SKU: ZZPIPEMSSS

    Brand: SPECLITE

    Give your wall packs a brain: this swivel pipe with microwave motion sensor turns a standard outdoor fixture into a smart, occupancy-driven light that only runs full tilt when someone is actually there. Sold under SKU ZZPIPEMSSS by SPECLITE, it is the accessory people look for when they search for a wall pack with motion sensor, a motion sensor for light, an occupancy sensor pipe or simply a 120v motion sensor add-on for commercial exterior lighting. The assembly combines an extension pipe and a microwave (radar-type) occupation sensor on a swivel base, so you can aim the detection zone exactly where the traffic is — a doorway, a loading bay, a stairwell, a parking aisle — instead of settling for whatever the fixture happens to see.

    This is a purpose-built accessory, not a universal gadget, and that is precisely its strength: the extension pipe and motion sensor are designed for AW00CRFC0400PSS, AW00CRFC0800PSS, WP00CRFC0600PSS and WP00CRFC1200PSS. Because it is matched to those full cutoff LED wall pack models, you skip the guesswork of drilling, adapters and mismatched threads — the pipe mounts to the fixture's sensor port and the swivel lets you tilt and rotate the head to fine-tune coverage. Microwave detection is the reason many contractors prefer this type of sensor outdoors: it reads movement rather than heat, so it stays responsive through Canadian temperature swings when a warm body is bundled up in a parka. Paired with the integrated photocell already on these wall packs, you get dusk-to-dawn operation with an occupancy boost, which is the classic recipe for cutting run hours without leaving anyone in the dark. UPC 882110008059.

    Put it to work over back doors and service entrances, on warehouse and garage walls, along condo and apartment corridors, at car dealerships, self-storage sites, schools, churches and strip-mall rear alleys — anywhere security matters but all-night full output is a waste. It fits the Wall pack full cutoff 40-30-20W, the Wall pack full cutoff 80-70-60W, the Wall pack SS 60-40-30W and the Wall pack SS 120-100-80W. Add it to your next wall pack order and let the light follow the people.

    Compatible with
    Works with:
    Sensor: AW00CRFC0400PSS, AW00CRFC0800PSS, WP00CRFC0600PSS, WP00CRFC1200PSS

    52.97$

    What exactly you are getting
    The ZZPIPEMSSS is a two-in-one accessory: an extension pipe and a microwave motion occupation sensor mounted on a swivel. The pipe drops the sensor head away from the fixture body so the detection cone is not shadowed by the housing or the hood of a full cutoff wall pack, and the swivel joint lets you pivot the head down toward a doorway, out toward a driveway, or sideways along a wall. That adjustability is what separates a sensor that nuisance-trips on passing traffic from one that catches a delivery driver the second he steps onto your property. Because it is a SPECLITE part made for SPECLITE fixtures, the thread, the port and the wiring are already sorted — no adapters to source, no field improvising.

    Why microwave instead of infrared
    A microwave (radar) sensor emits a signal and reads the change in its reflection, which means it detects motion rather than a heat signature. Outdoors in Canada, that matters: heavy winter clothing masks body heat and cold air narrows the contrast an infrared eye relies on, while a microwave head keeps reading a person walking, a car rolling in, or a forklift crossing a bay door. It is also less affected by wind-driven temperature shifts. For an exterior occupancy sensor application — rear exits, garbage enclosures, fire lanes, employee parking — this technology is the practical choice, and mounting it on a swivel pipe lets you trim the coverage so the light responds to your traffic and not the sidewalk next door.

    Compatibility and installation
    This extension pipe and motion sensor is suitable for four fixtures: AW00CRFC0400PSS, AW00CRFC0800PSS, WP00CRFC0600PSS and WP00CRFC1200PSS. Those wall packs are 120-347V, full cutoff, bronze with a clear lens, and each already carries an internal photocell, so the sensor layers occupancy control on top of dusk-to-dawn switching. Installation is straightforward for a qualified electrician: kill the power, remove the sensor port plug on the fixture, thread in the pipe, make up the connections, seal, then aim and lock the swivel head before you test at night. Walk the zone at the end of the job — that single step catches over-coverage before the tenant calls about a light that never shuts off. Note that this is an accessory only; it does not produce light on its own and must be paired with one of the listed fixtures.

    Technical specifications
    SKU: ZZPIPEMSSS
    Brand: SPECLITE
    Type: Swivel extension pipe with microwave motion occupation sensor
    Suitable for: AW00CRFC0400PSS, AW00CRFC0800PSS, WP00CRFC0600PSS, WP00CRFC1200PSS
    UPC: 882110008059
    Application: Residential and commercial projects

    Where it earns its keep, and documentation
    Think warehouses and shops that want the rear wall lit only when a truck backs in, apartment buildings that need safe stairwells without burning full output until 4 a.m., schools, garages, storage yards, restaurants with a back alley, and homeowners who want a bright, controlled light over the side door. Combined with the multi-wattage and selectable colour temperature options of the compatible fixtures, you build a complete exterior package: the Wall pack full cutoff 40-30-20W for doorways and walkways, the Wall pack full cutoff 80-70-60W for wider facades, and the Wall pack SS 120-100-80W where you need serious output over a yard. The technical PDF for this accessory (FICHE TECHNIQUE ZZPIPEMSSS) is available in the Documentation tab — download it for your submittal package or to confirm fixture compatibility before you order.

    Related products

    Top