WIRE GUARD FOR LH12

Name: WIRE GUARD FOR LH12
Brand: SPECLITE
SKU: ZZLH12WGSS
Price: 37.97 CAD
Availability: InStock

SKU: ZZLH12WGSS

Brand: SPECLITE

Give your high bay the armour it deserves. This is the wire guard for LH12, a metal protective cage built by SPECLITE to shield the LH12 LED linear high bay fixture from balls, pucks, tools, ladders and the everyday knocks that come with busy ceilings. People search for it under many names — high bay cage, wire mesh guard, protective grille, ball guard or impact guard — but the job is always the same: keep the lens and body of your linear LED lighting intact so the light keeps doing its job instead of ending up in a recycling bin. It is the accessory gymnasiums, school halls, arenas, garages and warehouses ask for the moment a fixture gets hit for the first time.

The guard is made of metal and mounts directly over the LH12 linear high bay, so there is nothing electrical to wire, no driver to match and no photometric change to worry about — the light stays the light, the cage simply takes the hit. Because it is a mechanical accessory, it adds no load to your circuit and does not affect the wattage, voltage or dimming behaviour of the fixture underneath. Order it by SKU ZZLH12WGSS so the fit is exact; it is designed specifically for the LH12 housing and not for round high bay LED lights or other body shapes. Full details are in the technical PDF (FICHE TECHNIQUE ZZLH12WGSS) available in the Documentation tab of this page.

Where does it earn its keep? Anywhere a ball can fly or a forklift mast can swing: school gymnasiums and CEGEP sport centres, community arenas and curling clubs, municipal garages, mechanical shops, warehouse aisles, loading docks, agricultural buildings and manufacturing floors. In Canadian facilities where a single lift rental costs more than the fixture itself, protecting a 4 ft linear LED high bay from the start is simply good planning — fewer replacements, fewer ladders, fewer interruptions in the middle of a season. Contractors often add one guard per fixture on the gym side of a project and skip them over offices or storage rooms. If your ceiling takes abuse, add the wire guard for LH12 to your order and install it once, for good.

Built to take the hit
The ZZLH12WGSS is a metal wire guard engineered as a dedicated accessory for the LH12 LED linear high bay. Its open mesh construction is the key to the whole idea: it absorbs and deflects impacts from basketballs, volleyballs, hockey pucks, pallets and swinging equipment, while leaving the fixture's light output path essentially unobstructed. Instead of replacing a damaged fixture — and renting the lift to reach it — you let a simple cage take the abuse. In a school gym or a busy shop, that single decision is often the difference between a fixture that lasts its full service life and one that gets written off in its second season.

Light quality stays untouched
A wire guard is a mechanical part, not an optical one. It does not change the colour temperature, the CRI or the dimming behaviour of the high bay lighting it protects — those specs belong to the LH12 fixture itself and are listed on that product's own page and spec sheet. The open grid pattern keeps the beam spreading the way the fixture was designed to spread it, which matters in gymnasiums and warehouse aisles where uniformity on the floor is what people actually notice. Because there is no lens, no diffuser and no electronics in the guard, there is nothing in it to yellow, fail or need service later on.

Technical specifications
Brand: SPECLITE
SKU / model: ZZLH12WGSS
Product: Wire Guard for LH12
Category: Linear High Bay Accessories
Material: metal
UPC: 882110008158
Box UPC: 10882110008155
Application: residential and commercial projects

Installation and compatibility
This guard is made for one thing: the LH12 linear high bay. It is not a universal cage, so do not plan it over round high bay LED lights, vapour tights or strip fixtures — the geometry simply will not match. Install it after the fixture is hung and aimed: position the cage over the body, secure it with the supplied hardware, then verify that nothing interferes with the suspension points, chains, aircraft cable or the driver compartment. There is no wiring, no polarity, no grounding step specific to the guard itself, which means an electrician or a maintenance tech can add it in minutes per unit. On new construction, the smart move is to install guards on the same lift pass as the fixtures; going back up later is what costs time.

Real projects and documentation
Typical Canadian applications include elementary and high school gymnasiums, CEGEP and university sport complexes, municipal arenas and field houses, recreation centres, town garages, fire halls, mechanical and welding shops, warehouses with narrow aisles and heavy forklift traffic, agricultural barns and manufacturing plants. Many facility managers standardize on a guard for every fixture below a certain mounting height and leave the high, untouchable rows bare — a practical way to protect 4 ft linear LED high bay lighting where it is actually at risk. For quantities, packaging and ordering details, consult the technical PDF (FICHE TECHNIQUE ZZLH12WGSS) in the Documentation tab of this page, and specify ZZLH12WGSS on your submittal so the right accessory arrives with the right linear LED lighting order.

Technical Files