LED STRIP 19.2W/M - LCLS24V-96W-50K-IP66

Name: LED STRIP 19.2W/M - LCLS24V-96W-50K-IP66
Brand: LEDCO
SKU: LCLS24V-96W-50K-IP66
Price: 106.97 CAD
Availability: InStock

SKU: LCLS24V-96W-50K-IP66

Brand: LEDCO

Some rooms just need a clean, continuous line of light instead of another fixture on the ceiling — and that's exactly what this LED strip delivers. Known on the job site as LED strip lighting, LED tape, light strips or simply LED light strips, this 24V cuttable roll hides inside coves, under cabinets, along stairs, in millwork reveals and in aluminum channels to create the glow without showing the source. It is a high-output version, so it is just as comfortable doing decorative accent work as it is doing real task lighting over a counter or workbench. SKU LCLS24V-96W-50K-IP66.

Under the silicone you get Epistar 2835 SMD chips — 128 LEDs per meter — drawing 19.2W/M (±10%) at an efficiency of 120 LM/W, which is a lot of usable light per foot of tape. The CRI 90+ rendering is what really sets it apart: wood grain, paint colours, skin tones and merchandise all look true instead of washed out, which matters enormously in kitchens, bathrooms and retail displays. Colour temperature is a crisp 5000K daylight, the beam spreads at 120º for an even wash with no dark gaps, and the strip runs on 24V DC. It is dimmable, UL listed, rated IP66, and rated for 50 000+ hours of life. The PCB measures 10mm wide with a 3oz copper build, can be cut every 62.5mm (8 LEDs), and supports runs up to 10m.

This is the tape you reach for in indoor LED lighting projects where brightness counts: kitchen coves and under-cabinet runs, bathroom mirror niches, basement and stairwell accents, garage and workshop benches, plus restaurant bars, reception desks, display cases and boutique shelving. Because of its IP66 rating, it also holds up in humid or dusty spots that would kill an ordinary tape. Remember that it needs a 24V DC driver and, ideally, an aluminum extrusion for heat and finish. Prefer a warmer look in the same output? Compare it with the LED strip 19.2W/M 24V 96W 30K IP66 or the indoor LED strip 24V 19.2W/M IP22 5000K. Roll it out and light your project properly.

Built to run bright and last
This LED tape light is built on a 10mm wide PCB with a 3oz copper layer — heavier copper means better heat transfer away from the diodes, and heat is the single biggest enemy of any LED strip. It carries 128 Epistar 2835 SMD chips per meter, densely packed so that the line of light reads as a smooth band rather than a row of dots, especially behind a diffuser. The IP66 protection seals the circuit against dust and water jets, which makes this version far more forgiving in kitchens, bathrooms, workshops and any spot where dust, humidity or the occasional wipe-down are part of life.

Light quality you can trust
At 19.2W/M and 120 LM/W, this is a high-output tape, not a decorative afterthought — it can genuinely light a counter, a workbench or a display case. The 5000K colour temperature gives a crisp, daylight-white feel that keeps workspaces alert and makes white surfaces read clean. What really matters visually is the CRI 90+: colours, finishes and materials stay faithful, so cabinetry, tile, artwork and merchandise look the way the designer intended. The 120º beam angle spreads light wide, filling a cove or a channel evenly instead of leaving hot spots.

Technical specifications
SKU: LCLS24V-96W-50K-IP66
Chip: Epistar 2835 SMD
LEDs per meter: 128pcs
Power: 19.2W/M ±10%
Efficacy: 120 LM/W
CRI: 90+
Colour temperature: 5000K
Beam angle: 120º
Voltage: 24V DC
Dimmable: Yes
PCB width: 10mm
PCB thickness: 3oz.
Max run length: 10m
Cut size: 62.5mm (8 LEDS)
Protection rating: IP66
Certification: UL
Lifespan: 50 000+ hours

Wiring, dimming and installation
The strip runs on 24V DC, so it requires a constant-voltage 24V driver sized for the total wattage of your run — count 19.2W per meter plus a safety margin. Runs can reach up to 10m; for longer installations, feed separate runs from the source rather than daisy-chaining endlessly, so brightness stays even from one end to the other. Cut only on the marked cut points every 62.5mm (8 LEDS), then solder or use a connector suited to the 10mm PCB width. The tape is dimmable through a compatible 24V dimming system, which lets you drop a bright kitchen cove down to a soft evening glow. Mounting it in an aluminum extrusion with a diffuser is always the right call: it hides the dots, protects the tape and helps dissipate heat.

Where it works and what goes with it
Think cove and ceiling perimeter lighting in a living room, under-cabinet lighting in a kitchen, mirror and vanity niches, stair nosings, basement renovations, garage benches, then on the commercial side: bar fronts, reception desks, retail shelving, display cases and signage. The full technical PDF (LCLS24V-96W-50K-IP66 Spec Sheet) is in the Documentation tab for your electrician or designer. Need the same 19.2W/M output in another white? Look at the LED strip 24V 19.2W/M IP22 2700K, the LED strip 24V 19.2W/M IP22 4000K, the warm LED strip 19.2W/M 24V 96W 30K IP66, or step down to the LED strip 9.6W/M 24V 48W 30K IP66 when you want a gentler accent on the same 24V system.

Technical Files