LED STRIP 120V COB 12W/M - LCLS120V-12WM-COB-40K-50M

LED STRIP 120V COB 12W/M - LCLS120V-12WM-COB-40K-50M

SKU: LCLS120V-12WM-COB-40K-50M

Brand: LEDCO

Say goodbye to bulky drivers and dark spots between diodes. This 120V COB LED strip is the continuous, dotless LED strip lighting people are searching for when they type "led strip lights", "led light strips" or "led lighting strips" — a flexible LED tape light that runs straight off line voltage, so there's no low-voltage power supply to hide in a ceiling or cabinet. SKU LCLS120V-12WM-COB-40K-50M ships as a long roll, cuttable at the marked points, ready to light coves, ceilings, stairwells, display cases, signage and long architectural runs in one clean, even line of light.

The COB (chip-on-board) construction spreads the light across a continuous emitting surface instead of individual dots, so you get a smooth ribbon of illumination with no visible pixelation — even up close, even behind a diffuser lens. It draws 12 W per metre and runs on 120V line voltage, which is exactly what makes it so practical on long perimeters: no voltage drop headaches from a distant transformer, no oversized driver box. Because it's flexible and cuttable, it follows curves, coves and corners that rigid fixtures simply can't handle, and a single roll covers a lot of ground on a jobsite. Like all LED sources, it sips power compared to old incandescent rope light and stays cool enough to sit close to finishes.

Homeowners use it for under-cabinet lighting, toe-kicks, crown moulding coves, basement ceilings, garages, closets and stair nosings; contractors and small businesses run it in retail displays, restaurant bars, reception desks, corridors, signage boxes and warehouse shelving — anywhere a long, uninterrupted line of light is the design. For a shorter run of the same product, see the LED strip 120V COB 12W/M, and don't forget the matching 120V power cord for 12W/M COB LED strip to connect the run safely. Roll it out, cut it to length, plug it in — and watch the room change.

429.97$


Built as one continuous line of light
Traditional LED tape uses individual SMD diodes spaced along the board, which is why you see dots and scallops through a diffuser. This COB LED strip (chip-on-board) covers the emitting surface with a dense phosphor layer, producing a seamless glow from end to end. On a cove, a handrail or a long ceiling reveal, that difference is instantly visible: the eye reads one clean line instead of a row of bright points. The strip stays flexible, so it bends around inside corners, curved bulkheads and rounded display fixtures where a rigid LED bar or linear fixture would have to be broken into segments.

Line voltage means a simpler install
Running on 120V directly is the big practical advantage here. There's no low-voltage driver to size, mount, ventilate and access later, and no cumulative voltage drop forcing you to feed a long run from both ends. That makes this strip a favourite for perimeter coves in large rooms, long corridors, warehouse racking and exterior soffit details in Canadian homes and businesses where runs get long fast. Always cut only at the marked cut points, cap and seal the cut end properly, and have the line-voltage connection made by a qualified electrician in accordance with the Canadian Electrical Code and your local inspection authority.

Technical specifications
SKU: LCLS120V-12WM-COB-40K-50M
Type: COB LED strip, flexible and cuttable
Voltage: 120V line voltage
Power: 12 W per metre
Category: 120V LED Strips
Application: residential and commercial projects

Accessories and compatible products
To energize the run, use the 120V power cord for 12W/M COB LED strip, designed specifically for the 12W/M COB family — no guesswork on connector size or polarity. If your project calls for a different length or look of the same 12 W per metre COB strip, the family includes LED strip 120V COB 12W/M and LED strip 120V COB 12W/M. For a lower-output line-voltage option on very long decorative perimeters, look at the LED strip 120V 3W/M. Many installers also pair strip with an aluminum LED profile and diffuser lens to protect the tape, spread the light and give the edge a finished, built-in look.

Where it earns its keep, and documentation
Think kitchen coves and under-cabinet runs, basement ceiling perimeters, stair and hallway accents, home theatre bulkheads, garage workbenches, retail shelving and display cases, bar fronts and back bars, reception desks, sign boxes, gym mirrors and corridor reveals in offices and clinics. Because it's sold by the roll and cut on site, one order can cover several rooms or an entire storefront with a consistent look — a real advantage when you're matching light across a renovation. The technical PDF spec sheet for LCLS120V-12WM-COB-40K-50M is available in the Documentation tab; download it for the full product details before you finalize your layout and connection plan.
Top