icon-info 0
No products in the cart.
  • fr
    • Back to Products
    FR
    0
    No products in the cart.
    Menu Search Cart
    LED STRIP 120V COB 12W/M - LCLS120V-12WM-COB-30K-50M
    LED STRIP 120V COB 12W/M - LCLS120V-12WM-COB-30K-50M

    LED STRIP 120V COB 12W/M - LCLS120V-12WM-COB-30K-50M

    SKU: LCLS120V-12WM-COB-30K-50M

    Brand: LEDCO

    Light up a whole room, a whole hallway, even a whole storefront with one continuous line of light — that's what this 120V COB LED strip was built for. Known on job sites and in search bars as LED strip lights, LED light strips, LED strip lighting or simply strip lights, this is the plug-and-play tape light that runs straight on line voltage, with no bulky driver box to hide in a ceiling. The COB (chip-on-board) construction means the diodes are packed under a continuous phosphor coating, so you get a smooth, unbroken ribbon of light instead of the row of dots you see on older tape. Homeowners use it for cove lighting, under-cabinet lighting, stair and hallway accents, basement ceilings and garages; contractors and small business owners reach for it to line display cases, shelving, bars, reception desks, signage and long corridors where a clean, even line of light does the selling.

    This is SKU LCLS120V-12WM-COB-30K-50M, the 50 m roll. It draws 12W per metre and runs directly at 120V, which is the whole point: you cut it at the marked points, add the proper end cap and power connection, and you're feeding it from standard line voltage instead of stringing low-voltage runs and hunting for transformer space. One long roll also means fewer joints, fewer splices and fewer weak points on a big run — a real advantage on a 40-foot basement ceiling or a retail perimeter. The COB format keeps the light output uniform along the entire length, which is exactly what you want when the strip is visible or when it's reflecting off a ceiling or a backsplash.

    In Canadian homes it's the easy answer for basement coves, kitchen toe-kicks and cabinet valances, garage workbenches, cottage ceilings and stairwells; in commercial spaces it lines coolers, display shelving, restaurant bars, salon mirrors and office reception walls. Pair it with the 120V power cord for 12W/m COB LED strip to get powered up fast, or look at the LED strip 120V COB 12W/m shorter roll when your run is smaller. Ready to draw your line of light? Add this roll to your project and get building.

    429.97$

    Continuous light, no dots
    The big difference between this COB LED strip and a traditional SMD tape is what you see when you look right at it. COB stands for chip-on-board: the LEDs are mounted densely on the board and covered by a continuous phosphor layer, producing a seamless ribbon rather than a string of visible points. That matters anywhere the strip is exposed — open coves, under a glass shelf, along a stair nosing, behind a bar rail — and it matters just as much for indirect lighting, because a uniform source gives you a smooth, even wash on the ceiling or wall instead of scalloped hot spots. It also makes short runs and tight bends look intentional rather than homemade.

    Line voltage, simpler installs
    Running at 120V is what makes this LED strip lighting so friendly on a renovation. There's no low-voltage driver to find a home for above a ceiling or inside a cabinet, no voltage drop math over long distances, and no hunting for a remote power supply location. You cut the strip only at the marked cut points, install the manufacturer's end cap and connection kit, and feed it from a standard line-voltage circuit. Always verify your connections are made with the correct accessories, keep the cut ends properly sealed, and follow the Canadian Electrical Code and local requirements for line-voltage work — when in doubt, have a licensed electrician make the final connection.

    Technical specifications
    SKU: LCLS120V-12WM-COB-30K-50M
    Type: COB LED strip (chip-on-board)
    Voltage: 120V
    Power: 12W per metre
    Roll length: 50M
    Application: residential and commercial projects

    Compatibility and accessories
    The matching 120V power cord for 12W/m COB LED strip - 1.5M is made for this 12W/m COB family and is the fastest way to bring power to the start of your run. Within the same family, the LED strip 120V COB 12W/m offers the same 12W/m COB tape on a shorter roll for smaller rooms and single-cabinet jobs, while the LED strip 120V COB 12W/m - LCLS120V-12WM-COB-40K-50M and the LED strip 120V COB 12W/m - LCLS120V-12WM-COB-40K-25M are the alternate colour-temperature versions if a crisper light suits the space better. Keeping one colour temperature across a whole floor is the trick to a finished, professional result.

    Where to use it and what's in the documents
    Think long lines: a basement perimeter cove, a hallway that needs night-time guidance, kitchen cabinet valances and toe-kicks, a garage workbench, a home theatre riser, a cottage ceiling beam. On the commercial side, it lines retail shelving and display cases, restaurant and hotel bars, salon and washroom mirrors, reception desks, corridors and channel letters or signage boxes. Mount it in an aluminium extrusion when the strip will be visible or subject to bumps — the channel adds a clean finish, a diffuser option and a heat path. For full details, the technical spec sheet for LCLS120V-12WM-COB-30K-50M is available in the Documentation tab of this page; download it before you order your cuts and accessories so your run lengths and connection points line up on the first try.

    Related products

    Top