icon-info 0
No products in the cart.
  • fr
    • Back to Products
    FR
    0
    No products in the cart.
    Menu Search Cart
    LED STRIP 120V COB 12W/M
    LED STRIP 120V COB 12W/M

    LED STRIP 120V COB 12W/M

    SKU: LCLS120V-12WM-COB-30K-25M

    Brand: LEDCO

    Looking for a continuous, dot-free line of light that plugs into standard house power? This LED strip 120V COB 12W/m is the kind of LED strip lighting people search for when regular LED light strips just won't cut it: no bulky driver, no low-voltage headaches, just a flexible ribbon of light you cut, connect and run. COB (chip-on-board) technology means the diodes are covered by a continuous light-emitting surface, so you see a smooth glow instead of a row of dots — a huge difference under cabinets, inside coves and anywhere the strip is visible or reflected on a glossy backsplash. It goes by many names on the job site: LED tape, LED ribbon, LED strip lights, strip lights, LED ceiling lights strip. Whatever you call it, it's built to solve the same problem — long, even runs of light where a fixture would look heavy or simply won't fit.

    The important numbers are refreshingly simple. It runs at 120V line voltage, draws 12W per metre, and comes on a generous 25 m roll under SKU LCLS120V-12WM-COB-30K-25M. Because it's a 120 V strip, you don't need a low-voltage transformer between the outlet and the light: the strip connects to house power through the matching power cord, which keeps the installation tidy and the parts count low. The 12 W/m draw lets you plan long uninterrupted runs without stacking multiple drivers along the ceiling, and the COB format lets you bend it around coves and gentle curves while keeping that uniform, seamless line. One 25 m roll covers a lot of linear footage — cut it into several runs for a whole floor, or keep it long for one dramatic perimeter.

    This is the strip contractors reach for in kitchen coves and under upper cabinets, along stair stringers, above crown moulding in living rooms, behind headboards, in retail display cases, under bar counters, in restaurant soffits and in office reception niches — residential and commercial alike. For Canadian renovations where ceilings are already low and every inch counts, a slim 120 V ribbon hides where a linear fixture never could. Power it with the 120V power cord for 12W/m COB LED strip - 1.5m, step up to the LED strip 120V COB 12W/m - LCLS120V-12WM-COB-30K-50M roll for bigger jobs, or compare with the lower-output LED strip 120V 3W/m. Roll it out and watch the room change.

    216.97$

    COB construction: light without the dots
    Traditional LED strip lights use individual SMD chips spaced along a flexible circuit, which is why you often see a scalloped pattern of hot spots and shadows when the strip sits close to a surface. This COB LED strip uses chip-on-board diodes under a continuous emitting layer, producing one uninterrupted line of light. That matters more than most people expect: under a cabinet with a polished quartz counter, in a cove with a smooth painted ceiling, or behind a mirror, the dotting of a cheap strip is the first thing anyone notices. The flexible format also lets the ribbon follow gentle curves and inside corners, so a cove detail or a rounded bulkhead stays lit evenly from end to end.

    Technical specifications
    SKU: LCLS120V-12WM-COB-30K-25M
    Type: COB LED strip, flexible
    Voltage: 120V
    Power: 12W per metre
    Roll length: 25 m
    Category: 120V LED Strips
    Application: residential and commercial projects

    Line-voltage wiring, fewer parts
    Because this is a 120V LED strip, there is no low-voltage driver to hide, no voltage-drop calculation over long runs, and no bulky transformer box to fit inside a soffit. The strip is fed directly from line voltage using the matching 120V power cord for 12W/m COB LED strip - 1.5m, which is the accessory designed specifically for the 12 W/m COB family — always use the cord and connectors intended for this strip rather than improvising. Plan your cuts at the marked cutting points only, keep the end of every run properly capped, and respect the maximum run length and the local electrical code requirements for line-voltage installations. Work with a licensed electrician when the strip is being hardwired into a circuit; at 12W per metre, load planning is straightforward but still needs to be done on paper before the first metre is rolled out.

    Where it earns its keep
    In a kitchen, run it under upper cabinets so the counter is lit without glare bouncing off the backsplash, or tuck it into a ceiling cove to wash a living room in soft indirect light. Retailers use it inside display cases and under shelf edges to make merchandise pop; restaurants and cafés hide it in bar soffits and behind banquette backs; offices use it in reception niches and along corridor bulkheads. Stair stringers, closet shelving, garage workbenches and basement bulkheads are all classic LED strip lighting targets in Canadian homes, where low ceilings and finished basements rarely leave room for a surface fixture. A single 25 m roll gives you enough material to do several of these zones in one visit, which is exactly why contractors buy it by the roll.

    Related products and documentation
    Need more length on one job? The same strip is offered as LED strip 120V COB 12W/m - LCLS120V-12WM-COB-30K-50M on a longer roll. Other colour options in the same family are listed as LED strip 120V COB 12W/m - LCLS120V-12WM-COB-40K-25M and LED strip 120V COB 12W/m - LCLS120V-12WM-COB-40K-50M, while the LED strip 120V 3W/m covers accent jobs that need a gentler output. The technical PDF spec sheet for LCLS120V-12WM-COB-30K-25M is available in the Documentation tab — download it before you order so your run lengths, cut points and power feed locations are confirmed on the drawing, not on site.

    Related products

    Top