8' OPAQUE LENS #545

Name: 8' OPAQUE LENS #545
Brand: LEDCO
SKU: LCLENS-OPAQ-545
Price: 55.97 CAD
Availability: InStock

SKU: LCLENS-OPAQ-545

Brand: LEDCO

Give your LED strip runs that smooth, seamless glow instead of a row of hot dots. The 8' Opaque Lens #545 (SKU LCLENS-OPAQ-545) is the replacement diffuser cover made for aluminum LED channel systems — what people also call an extruded light lens, a white lens, an opal diffuser or simply the cover that snaps onto an aluminum extrusion c/w translucent lens. Where a clear cover leaves every individual diode visible, this opaque diffuser scatters the light evenly across its whole surface for a continuous, architectural line of light that hides the tape and the soldered connection points inside the profile.

This is a pure accessory, so it works with the light you already chose: the lens does not shift the colour of your LED tape, which means your high colour rendering and your selected colour temperature stay exactly as specified, and the run remains dimmable with compatible dimmers. Diffusing the beam also cuts glare and visual fatigue — a real plus anywhere the channel sits near eye level or above a work surface. Each piece comes in an 8 foot length so you can cover long straight runs with fewer seams, and it is designed to snap or slide into compatible extrusion profiles. Rigid yet flexible enough to handle on site, it resists yellowing and wipes clean with a soft cloth.

Use it under kitchen cabinets, along stair handrails, inside retail display cases, in cove and ceiling details, behind reception desks, in offices, salons, clinics and restaurants — anywhere a bare strip would look unfinished. It is also the part to order when a lens has been scratched, cracked or lost during a renovation. This cover is profile-specific: it is made for channel #545, so confirm your extrusion number before ordering. Working with other profiles? See the matching covers such as the 8' opaque lens #49, the 8 ft opal diffuser lens for profile #44 or the 8' frosted lens #84 #85 #86 #88. Order the right lens and finish your installation the way it was meant to look.

What this lens is
The 8' Opaque Lens #545 is a diffuser cover, an accessory sold on its own for aluminum LED channel systems. It is the piece that closes the top of the extrusion once the tape is installed, turning a visible line of diodes into one even band of light. Installers search for it under many names — extruded light lens, custom extruded lens, white lens, opal diffuser, LED strip light cover — but the job is always the same: hide the hardware, soften the output and give the run a finished, architectural look.

Light quality and visual comfort
An opaque diffuser scatters the beam across its full surface instead of letting it escape point by point. That removes the dotting effect you get with a clear cover and lowers glare, which matters in spaces where people work for hours or where the profile sits near eye level: under-cabinet task lighting, handrails, display cases, reading nooks. Because the lens only diffuses and does not tint, the high colour rendering and the colour temperature of your LED tape are preserved, and the circuit stays dimmable with compatible dimmers — no change to your driver or control plan.

Technical specifications
SKU: LCLENS-OPAQ-545
Type: opaque diffuser lens (accessory for aluminum LED channel)
Profile compatibility: channel #545
Length: 8 feet
Finish: opaque / diffusing
Mounting: snaps or slides into the compatible extrusion
Properties: rigid yet flexible enough to handle, resists yellowing, easy to wipe clean

Installation and cutting
Mount the channel and the LED tape first, then press the lens in from one end and work steadily along its length until it seats evenly. If your run is shorter than 8 feet, cut the lens with a fine-tooth blade and smooth the cut edge so the end caps seat flush against it. For long runs, plan your seams where they will be least visible — over a cabinet divider, at a corner or behind a bracket. Keep protective film on until the profile is fixed in place to avoid scratches, and clean fingerprints off with a soft, slightly damp cloth rather than a solvent. No wiring or tools beyond a blade are required, since the lens carries no electrical function.

Applications and matching parts
Kitchen cabinets and islands, bathroom mirror niches, closets and pantries, stair and corridor handrails, retail shelving and jewellery cases, cove ceilings in condos, reception desks, clinic and salon millwork, garage and workshop benches — anywhere a Canadian renovation or fit-out calls for clean linear light. It is also the practical fix when a cover has been cracked during a move or yellowed in an older installation. Always order the lens that matches your extrusion number; for other profiles in the same family, look at the 8 ft opal diffuser lens for profile #80, the 16 ft opal diffuser lens for profile #44 or the prime lens #145. No spec sheet or IES file is published for this accessory; the profile number and the 8 foot length are what you need to match it correctly.