8FT OPAL DIFFUSER LENS – LED PROFILE #80

Name: 8FT OPAL DIFFUSER LENS – LED PROFILE #80
Brand: LEDCO
SKU: LCLENS-OPAQ80-8FT
Price: 22.97 CAD
Availability: InStock

SKU: LCLENS-OPAQ80-8FT

Brand: LEDCO

Say goodbye to that harsh line of dots showing through your LED tape. The 8FT OPAL DIFFUSER LENS – LED PROFILE #80 is the snap-in cover that turns a bare strip into a clean, continuous band of light. People look for it under a lot of names — opal lens, opaque lens, extruded light lens, LED channel cover, diffuser for aluminum profile, or simply "aluminum extrusion c/w translucent lens" — and they all point to the same thing: the long milky top piece that sits over the LED strip inside the aluminum channel. This one is cut to 8 feet and shaped specifically for LED profile #80, so it seats properly along the full run instead of bowing or popping loose.

Because this is a lens and not a fixture, what matters is the fit and the finish, and here it's simple: an 8FT (8') opal diffuser designed for LED profile #80, sold as the lens only. The opal finish is the workhorse choice when you want the light spread out and the individual diodes hidden, giving you that soft, even glow along the whole channel rather than a row of bright spots reflecting off a countertop or a ceiling. Keep the profile and the lens from the same family and the assembly stays tight and straight, which is exactly what you want on long architectural runs where any gap or wave is visible from across the room. Order by the SKU LCLENS-OPAQ80-8FT so you get the #80 shape and not a look-alike.

It's made for residential and commercial projects alike: under-cabinet and pantry lighting in a kitchen reno, cove and ceiling perimeter runs in a living room or lobby, closets, staircases, garage workbenches, retail shelving, display cases, reception desks and office millwork. Contractors across Canada keep 8-foot lengths on the truck because they can be cut down on site with a fine-tooth blade for shorter sections and jointed end to end for longer ones. Need more length in one order? Look at the 16ft opal diffuser lens – LED profile #80. Working with a different channel? There's also the 8ft opal diffuser lens – LED profile #44 and the 8' frosted lens #84 #85 #86 #88. Match your profile number, add your lens, and finish the job right.

Compatible with
Works with:
Channel / profile: LCPROF-80-16FT, LCPROF-80-8FT

What exactly you're getting
This is the replacement or add-on opal diffuser lens for LED profile #80, supplied in an 8-foot length. It is the cover only — no aluminum channel, no LED strip, no end caps. The opal (opaque-look) finish is the diffusing style people choose when the goal is to erase the individual LEDs and read the fixture as one solid line of light. If you already own #80 extrusions and your original lens got scratched, yellowed, cracked during a renovation, or was simply cut too short, this is the part that brings the run back to new without touching the profile screwed to your cabinet or ceiling.

Light quality and why opal matters
A bare LED strip shows "dotting" — a visible row of hot spots, especially when the strip sits close to the cover or when you can see the channel from an angle. An opal lens scatters that output so the surface glows evenly from end to end. Compared with a clear cover it trades a little raw punch for a much cleaner look, which is why it's the default for under-cabinet lighting, cove lighting, display millwork and anywhere the fixture itself is in the sightline. Rule of thumb on site: the farther the strip sits from the lens and the tighter the LED spacing on the tape, the smoother the final line.

Technical specifications
SKU: LCLENS-OPAQ80-8FT
Product: Opal diffuser lens
Length: 8FT
Designed for: LED profile #80
Finish: Opal / opaque diffuser
Category: End Caps, Lenses & Acc.
Applications: Residential and commercial projects

Installation and handling tips
The lens slides in from the end of the channel or snaps in from the top, depending on how your #80 profile is mounted; sliding is usually easier before the profile is fixed in place, snapping is the fix when the extrusion is already anchored. Cut with a fine-tooth blade or a sharp utility knife and score-and-snap technique, support the full length so it doesn't flex, and deburr the cut edge so it seats flush. Leave the protective film on until the run is mounted and wired — that's what keeps drywall dust and fingerprints off the diffusing surface. For long runs, butt the sections tightly inside the channel and place the joint where a shelf, a corner or a ceiling break hides it. Always confirm your extrusion is stamped or catalogued as #80 before ordering, since lens profiles are not interchangeable between channel families.

Compatibility, projects and documentation
Kitchens and bathrooms, closets and pantries, stair nosings and handrails, home theatres, garage and basement workshops, plus commercial work like retail shelving, cooler and display cases, reception fronts, corridors and office desking — this lens suits all of them because it's the finishing piece of a linear LED strip lighting system. Same family, different needs: go longer with the 16ft opal diffuser lens – LED profile #80, or pick the right cover for another channel with the 8' opaque lens #49, the 8' opaque lens #545 or the 8ft opal diffuser lens – LED profile #44. No spec sheet or IES file is published for this accessory; any document added later will appear in the Documentation tab of this page.