4 FEET 45 DEGREE ALUMINUM PROFILE FOR LED STRIP (LUX2400)

Name: 4 FEET 45 DEGREE ALUMINUM PROFILE FOR LED STRIP (LUX2400)
Brand: LED MONTREAL
SKU: 4LUX2400
Price: 28.97 CAD
Availability: InStock

SKU: 4LUX2400

Brand: LED MONTREAL

Some lighting jobs look amazing the moment you tilt the light at the right angle — and that is exactly what this 45 degree aluminum profile for LED strip was built to do. Known on job sites as a corner channel, an angled aluminum extrusion, an LED tape track or simply a profile for led strip lights, the LUX2400 sits snugly in an inside corner and aims your tape across the surface instead of leaving a hard, glaring line. The result is a soft wash of light that grazes a wall, a ceiling line, a backsplash or the underside of a cabinet, while the diodes themselves stay discreetly out of sight. It is the simple, sturdy piece that turns a loose roll of LED strip lighting into a finished architectural detail.

Model 4LUX2400 is a 45° surface-mount profile measuring 4 Feet (1.22 m) long, 20 mm wide and 20 mm high — a compact square section that tucks neatly into corners without stealing visual space. The body is extruded aluminum, an excellent conductor that pulls heat away from the tape for efficient thermal management, helping your strip hold stable light output over a longer service life. That rigid shell also shields the LEDs from dust, bumps and accidental contact, which matters in busy kitchens, stairwells and workshops. The channel accepts common strip widths, including standard indoor tape as well as weather-resistant silicone-coated strips, so it works for interior runs and sheltered exterior ones alike. Add a diffuser and the individual diodes blend into one continuous, even line.

Canadian homeowners use it for cove lighting, crown moulding accents, under-cabinet glow, closet and pantry lighting, stair nosings and basement renovations; contractors and small businesses reach for it in retail displays, reception desks, restaurant bars and office corridors. Install with mounting clips or heavy-duty double-sided tape, then close things off with matching end caps — open for pass-through wiring, closed for a sealed look. Need a longer uninterrupted run? Pair it with the 8 feet 45 degree aluminum profile for LED strip (LUX2400) and plan your lengths to match the room. Dry-fit everything, cut with a fine-tooth blade, plan your power feed — then peel and stick.

Built for inside corners
The LUX2400 is a 45° corner extrusion, meaning it seats flat against two perpendicular surfaces and holds your LED tape on an angle between them. That geometry is what separates a professional install from a DIY one: instead of a bright stripe pointed straight out at eye level, you get a wide, gentle wash of light across the adjacent surface. The aluminum profile for LED strip also hides the tape, the solder points and the wiring, so all anyone sees is light. Because the extrusion is rigid, it keeps long runs perfectly straight — no sagging, no wavy lines along a ceiling cove or a cabinet edge.

Technical specifications
Model: 4LUX2400
Type: 45° (Surface)
Length: 4 Feet (1.22 m)
Width: 20 mm
Height: 20 mm

Thermal performance and strip compatibility
Aluminum is one of the best heat conductors you can put behind an LED tape. Mounted in this LED channel, your strip transfers its heat into the extrusion instead of cooking itself, which supports longer service life and more stable brightness and colour over time. The channel accepts common strip widths, including standard indoor tape as well as weather-resistant silicone-coated LED strips, so the same profile can handle a kitchen toe-kick and a covered porch soffit. If you are running a diffused look, a cover clipped into the channel softens the hot spots so the line reads as one continuous glow rather than a row of dots.

Installation and finishing
You have two mounting paths: mounting clips screwed into the substrate, or heavy-duty double-sided tape for a fast, fastener-free install on clean, dry surfaces. Matching end caps finish each run — the open version lets wiring pass through to the next section or back to the driver, and the closed version gives a tidy, sealed appearance. A few habits make the job painless: dry-fit the full run before peeling any adhesive, cut the channel with a fine-tooth blade for a clean edge, leave a small gap at connection points so the wiring exits comfortably, and always plan the power feed location before the profile is fixed in place.

Where it earns its keep, and documentation
Think cove lighting above crown moulding, indirect ceiling perimeters in a living room, under-cabinet task light in a kitchen, stair and hallway guidance, closet and pantry shelving, garage workbenches, plus commercial work like retail shelving, display cases, reception desks and restaurant bars. For longer walls, combine 4-foot sections with the 8 feet 45 degree aluminum profile for LED strip (LUX2400) to minimize the number of joints across a run. The technical PDF for the 4 FOOT 45 DEGREE ALUMINUM PROFILE FOR LED STRIP (LUX2400) is available in the Documentation tab with the model, type and dimensions, so you can confirm fit before you order your LED strip lighting and accessories.

Technical Files