10 KEY RF REMOTE AND CONTROLLER FOR RGB LED STRIPS

Name: 10 KEY RF REMOTE AND CONTROLLER FOR RGB LED STRIPS
Brand: LED MONTREAL
SKU: RFRGBCONT
Price: 19.97 CAD
Availability: InStock

SKU: RFRGBCONT

Brand: LED MONTREAL

Tired of fumbling behind the couch to change the colour of your LED strip lights? The 10 Key RF Remote and Controller for RGB LED Strips from LED Montreal gives you full command of your colour-changing LED light strips from across the room — or from the next room entirely. Also known as an RGB controller, RF remote kit or colour controller for LED strip lighting, this little kit is the missing link between your power supply and your RGB tape light. It's the go-to solution for anyone installing LED lighting strips under cabinets, in coves, behind a TV, along a staircase or around a bar counter, and who wants effortless control without walking over to the wall.

Because it runs on radio frequency instead of infrared, this remote works from up to 30 meters away and does not need a line of sight — no ugly sensor eye left dangling where guests can see it. The controller itself measures less than 5 cm long, so it hides inside a cabinet, behind a valance, above a ceiling LED strip or inside a millwork cavity with no fuss. The 10 key remote lets you power the strip on and off, dim it, pick colours manually, and launch automatic colour-change modes with adjustable speed. It works with both 12V and 24V equipment, so one kit covers most of the RGB tape on the market. The kit includes 1 RF controller and 1 ten-key remote, and the SKU is RFRGBCONT.

This kit shines in family rooms and home theatres, kids' bedrooms, basement renos, kitchen toe-kicks and island overhangs, as well as in restaurants, salons, gyms, retail displays and event spaces where a colour change sets the mood instantly. Canadian homeowners love it for long winter evenings when a warm amber or deep blue glow changes the whole feel of a room, and contractors love that it disappears completely inside the millwork. Connect it between your 12V or 24V RGB power supply and your RGB strip, tuck it out of sight, and you're done. Approved for residential and commercial projects — add it to your next RGB installation and take control.

What's in the kit
The 10 Key RF Remote and Controller for RGB LED Strips is a two-piece kit: one compact RF controller and one 10-key handheld remote. The controller is the brain — it sits in-line between your low-voltage power supply and your RGB LED strip light, interpreting the signals from the remote and sending the right mix of red, green and blue to the tape. The remote is the interface, small enough to live on a coffee table, a nightstand or clipped near the entrance of a commercial space. Because everything travels by radio frequency, the two pieces simply need to be within range of each other — no aiming, no pointing, no waiting.

RF instead of infrared: why it matters
Conventional infrared kits force you to leave a receiver eye in plain sight, and they only respond when you point straight at it. This RF remote reaches up to 30 meters and, in most cases, works right through a wall — so you can dim the strip in the basement stairwell from the top of the stairs, or shut down a display window from behind the counter. That freedom is what lets installers hide the hardware entirely, which is exactly what you want in a clean cove-lighting or under-cabinet job where no cable, sensor or box should ever be visible.

Technical specifications
SKU: RFRGBCONT
Brand: LED MONTREAL
Type: RF remote and controller kit for RGB LED strips
Remote: 10 keys
Control range: up to 30 meters
Controller length: less than 5 cm
Voltage compatibility: 12V and 24V
Kit includes: 1 RF controller, 1 ten-key remote
Use: residential and commercial projects

Functions and installation
The ten keys cover everything most projects need: on and off, dimming up and down, manual colour selection, automatic colour-change modes and speed adjustment for those modes. Installation follows the usual low-voltage chain — power supply first, then the controller, then the RGB strip — always matching the voltage of the driver to the voltage of the tape. Since the controller accepts both 12V and 24V systems, you can standardize on one control kit across a whole job even if different rooms use different tape. Keep the controller accessible enough for future service, but feel free to tuck it inside a cabinet, above a crown moulding or behind a TV panel — with RF, hiding it costs you nothing in performance.

Where it earns its keep
Think of a finished basement where the ceiling cove turns deep blue for movie night, a teenager's room that cycles through colours on a slow fade, a barbershop or nail salon whose backbar matches the brand, or a restaurant that shifts from warm tones at dinner to vivid ones later in the evening. In retail, an RGB accent behind a display shelf can be changed seasonally in seconds. In every one of those cases, this kit removes the last friction point: the control. Pair it with your existing 12V or 24V RGB tape and driver, and you have a complete, discreet LED strip lighting system ready for residential or commercial use.