LED MULTI ZONE REMOTE HOLDER

Name: LED MULTI ZONE REMOTE HOLDER
Brand: LED MONTREAL
SKU: WALLMNT
Price: 4.97 CAD
Availability: InStock

SKU: WALLMNT

Brand: LED MONTREAL

Tired of hunting for your remote every time you want to change the colour or dim your strip lights? The LED Multi Zone Remote Holder from LED Montreal is the small accessory that solves a very big everyday annoyance. Also searched as a remote wall mount, remote cradle or remote bracket, this simple wall holder gives your LED strip lights controller a permanent home — right where you expect it, at switch height, beside the door or at the top of the stairs. Slide the remote in when you are done, or leave it docked and press the buttons directly from the holder, exactly like you would use a regular light switch. No more digging through couch cushions, no more remote lost on a job site, no more calling the family to ask who used it last.

Installation is genuinely a 1-2-3 job. The wall mount ships with double-sided adhesive tape for surfaces where you would rather not drill — backsplash, tile or ceramic — and with 2 drywall anchors and screws when you want a solid mechanical fix into a wall. It is available in white only, a clean finish that blends into most painted walls, tiled splashbacks and cabinetry without drawing attention. The remote simply slips into the holder: nothing to wire, nothing to power, no tools beyond a screwdriver if you choose the screw-mount option. SKU WALLMNT.

This holder is made for LED Montreal's Multi Zone system, so it is the natural finishing touch on any project where a multi-zone remote controls several runs of LED tape or ruban LED at once. Think kitchen under-cabinet lighting where the remote lives beside the backsplash, a basement home theatre, a bedroom headboard, a retail counter, a restaurant bar, a salon or a small office reception. It works just as well in residential renovations as in commercial fit-outs across Canada, and it is the kind of detail clients remember: the contractor who left the remote mounted, labelled and ready to use. Whether you already own a Multi Zone system or you are about to build one, add the holder and stop losing the remote for good.

What it is
The LED Multi Zone Remote Holder is a wall-mounted cradle designed to hold your Multi Zone remote control in one fixed, obvious place. Instead of a loose remote that migrates from room to room, you get something that behaves like a light switch: always in the same spot, always at hand, always ready. You can pull the remote out to carry it across the room, or simply press its buttons while it sits in the holder — dimming, colour changes and zone selection all work perfectly with the remote docked. For households, rental units and businesses where several people share the same lighting control, that predictability is the whole point.

Construction and finish
The holder is offered in white only, a discreet finish that sits quietly against painted drywall, white tile, ceramic backsplash or light cabinetry. Its low profile keeps the remote flat against the wall so it does not catch sleeves or shopping bags in a tight hallway or behind a bar. Because the remote slides in and out freely, there is no clip to fight with and no mechanism to wear out over time.

Installation
Two mounting methods are included in the box, so you can adapt to the wall you actually have. The double-sided adhesive tape is the go-to for finished surfaces you do not want to perforate: a tiled backsplash, ceramic, glass tile, a millwork panel or a rental wall where holes are not welcome. Clean and dry the surface first, press firmly and let the adhesive set before loading the remote. For drywall, the included 2 drywall anchors and screws give a permanent, tamper-resistant fix — the right choice in a commercial space, a classroom, a gym or anywhere the public passes by. There is no wiring, no transformer and no power required: the holder is a purely mechanical accessory, which means anyone can install it without an electrician.

Compatibility
This accessory is made for LED Montreal's Multi Zone remote. If your installation already runs on a Multi Zone controller driving several zones of LED strip lighting, the holder drops straight into your setup. If you are still planning the project, budget one holder per remote — and consider one per floor or per zone group in larger homes and commercial spaces, so nobody has to walk across the building to change a scene. The SKU to quote is WALLMNT.

Where it earns its keep
In a kitchen, mount it at the end of the counter so under-cabinet LED tape can be dimmed while cooking. In a basement or home theatre, put it at the bottom of the stairs so the lights come up before anyone walks down. In a bedroom, place it beside the headboard as a bedside control. On the commercial side, it works behind a retail cash counter, at a restaurant hostess stand, in a salon, a spa, a bar or a small office where staff change the ambiance through the day — and it keeps the remote from disappearing at shift change, which in a busy Canadian storefront is worth more than it sounds. Available in white, easy to install in minutes, and ready for both residential and commercial projects.