RT05 WINDOW TRIM FOR LIGHT ENGINE RT05HV & RT05LV, BLACK

Name: RT05 WINDOW TRIM FOR LIGHT ENGINE RT05HV & RT05LV, BLACK
Brand: LUMENSTARLED
SKU: LS-RT05-WIN-BK
Price: 14.97 CAD
Availability: InStock

SKU: LS-RT05-WIN-BK

Brand: LUMENSTARLED

Give your step lights the clean, finished edge they deserve. The RT05 Window Trim in black (SKU LS-RT05-WIN-BK) by LUMENSTARLED is the faceplate — also called a window trim, trim ring, bezel or face trim — made specifically for the RT05HV (high voltage) and RT05LV (low voltage) light engines of the RT05 screwless step light series. It's the piece that covers the gap between the recessed housing and the wall or ceiling surface, so the light engine looks like it was always meant to be there. Whether you're finishing a staircase, a hallway baseboard, a soffit or a low-level accent run, this trim turns a rough opening into a crisp, intentional detail.

Because the trim is engineered around the exact profile of the RT05 platform, it lines up with the light engine aperture the way it should — a snug, rattle-free fit with no cutting, bending or shimming on site. The RT05 system it completes is a compact recessed step light rated IP67, with a hole cutout size of 4-3/4" × 2-7/8" (121 × 73 mm) and fixture dimensions of L120 x W74 x H38mm (L4 11/16 x W2 7/8 x H1 1/2"). The black finish is one of three trim colours offered for the RT05 family (black, brushed nickel, white), and it's the one designers reach for when they want the fixture to recede into a dark surface or stand out as a deliberate graphic accent.

This little component earns its keep on stairwells, corridors, hotel and restaurant interiors, retail entries, condo lobbies, home theatres, basements and exterior soffits — anywhere the RT05 light engine is doing low-level guidance lighting. Canadian contractors and designers like keeping a few spares in the van: specifying the right trim from the start means no second trip, no mismatched faces along a run of lights, and a uniform look from the first step to the last. Ordering black trims for a whole staircase? Count one per light engine and you're set. Match your RT05HV or RT05LV engines with this black window trim and finish the job properly.

Light engine sold separately
This trim does not include the light engine. It fits the RT05 light engines installed in a standard single gang junction box: LS-RT05HV-3K, LS-RT05HV-4K, LS-RT05HV-MS-3K, LS-RT05LV-3K, LS-RT05LV-RGBW. Count one trim per engine.

Compatible with
Works with:
Fixture: LS-RT05HV-3K, LS-RT05HV-4K, LS-RT05HV-MS-3K, LS-RT05LV-3K, LS-RT05LV-RGBW

What this accessory is
The LS-RT05-WIN-BK is the window trim (face trim / bezel) for the LUMENSTARLED RT05 screwless step light platform, sold as the finishing face for the RT05HV and RT05LV light engines. In a screwless design, the trim is what you see — there are no visible fasteners breaking up the face, just a clean rectangle of black against the wall. It conceals the cut edge of the opening, hides the housing and holds proper alignment with the light engine aperture so the beam exits the way the optic intended, without shadowing or light leak around the frame.

Fit and installation
Nothing about this trim requires improvisation. It is dimensioned to the RT05 housing, which uses a hole cutout size of 4-3/4" × 2-7/8" (121 × 73 mm) and a fixture footprint of L120 x W74 x H38mm (L4 11/16 x W2 7/8 x H1 1/2"). Rough in the opening to the cutout dimension, land the light engine, then seat the trim for a flush, rattle-free face. Because the RT05 engines ship with a 12" (30 cm) wire lead, plan your junction box or driver location within reach before you close up the wall. Order one trim per light engine, and keep the finish consistent across a run — mixed finishes on a stair flight are the kind of detail clients notice immediately.

The RT05 system it completes
The RT05 light engines this trim serves are compact recessed fixtures rated IP67 and built for an operating range of -20°C to +45°C, which matters in Canadian stairwells, garages and covered exterior soffits. They run at 100V AC or 12V AC/DC depending on the HV or LV version, draw 2W / 2.2W, and deliver 145 lumens with a CRI greater than 90 — enough punch to mark a step or wash a baseboard without glare, and with the colour rendering to keep stone, wood and paint looking true. Colour temperature options across the family include 3000K warm white, 4000K natural white, RGB and RGBW, the engines are dimmable, they are c ETL us Listed, and they carry a 3-year warranty.

Technical specifications
SKU: LS-RT05-WIN-BK
Brand: LUMENSTARLED
Type: Window trim for RT05HV and RT05LV light engines
Trim colour: Black (family offered in black, brushed nickel, white)
Product code (system): LS-RT05
Hole cutout size: 4-3/4" × 2-7/8" (121 × 73 mm)
Fixture dimensions: L120 x W74 x H38mm (L4 11/16 x W2 7/8 x H1 1/2")
IP rating (light engine): IP67
Certifications (light engine): c ETL us Listed

Where it gets specified and what's in the Documentation tab
Black RT05 trims show up on hotel corridors and guest-room entries, restaurant stair runs, retail thresholds, condo and office lobbies, home theatre aisles, finished basements, and exterior soffits or porch steps where the IP67 engine belongs. Against a dark tile, charcoal paint, black-stained wood or a minimalist industrial wall, the black face nearly disappears by day and reads as a controlled line of light at night; on a pale wall it becomes a deliberate graphic accent. The RT05 SCREWLESS STEP LIGHT technical PDF is available in the Documentation tab — download it to confirm the cutout, the voltage version you need and the trim colour before you order, and add this black window trim to your cart in the same quantity as your light engines.

Technical Files