LED STRIP 19.2W/M (RGBW) - LCLS24V-96W-RGBW35K-IP22

Name: LED STRIP 19.2W/M (RGBW) - LCLS24V-96W-RGBW35K-IP22
Brand: LEDCO
SKU: LCLS24V-96W-RGBW35K-IP22
Price: 97.97 CAD
Availability: InStock

SKU: LCLS24V-96W-RGBW35K-IP22

Brand: LEDCO

Colour when you want it, clean white light when you need it — that's the promise of this RGBW LED strip, and it delivers on both counts. Sold as a 5 m reel, this 24V DC flexible tape (SKU LCLS24V-96W-RGBW35K-IP22) packs red, green, blue and a dedicated 3500K white chip on the same board, so one single run of LED strip lighting handles everyday task and ambient light as well as full-colour scenes. People look for it as LED strip lights, LED light strips, LED lighting strips, ruban LED or simply strip lights, and it's the go-to for cove and ceiling details, under-cabinet lighting, toe-kicks, bar fronts, display cases, stairs, headboards and signage — anywhere you want a continuous, hidden line of light instead of a visible fixture.

The numbers back it up: 19.2W per metre at 24V DC, a dense 120 LEDs per metre for a smooth, even line, a wide 120° beam angle and a CRI of 90+ so wood grain, paint, fabric and skin tones look true instead of washed out. The white channel here is 3500K, that friendly neutral tone that sits perfectly between warm and crisp. The board is a 2 oz density white PCB, 12 mm wide, cuttable every 50 mm, and it mounts with 3M double-sided tape on non-porous surfaces. It's UL listed, rated IP22 for dry indoor use, operates from -25°C to 60°C, and is rated for 50,000+ hours of life. Dimming is flexible too: DMX, PWM, RF PWM, 0-10V and MLV incandescent controls are all supported.

This tape earns its place in kitchens, basements, home theatres, bedrooms and finished garages, and just as easily in restaurants, salons, boutiques, hotel lobbies and retail displays across Canada. Pair it with a matching 24V DC driver and an RGBW controller or remote, and use an aluminum channel with a diffuser to hide the dots and protect the strip. Need a straight single-colour run elsewhere in the same project? Look at the LED strip 19.2W/m 24V 96W 30K IP66 or the softer LED strip 24V 2835 4.8W/m IP22 (30K). Prefer pure colour without a white channel? The LED strip 14.4W/m 24V 72W (RGB) IP22 is the one. Roll out your light line and make the room yours.

Four colours on one board
What makes an RGBW LED strip different from a standard RGB tape is the fourth chip: a dedicated white emitter, here at 3500K, running alongside the red, green and blue diodes. That means you don't have to mix R, G and B to fake white — you get a real, stable, high-quality white for working and living, then add colour on top or on its own for mood, branding or holidays. With 120 LEDs per metre and a cut point every 50 mm, the line of light stays tight and uniform, with far less dotting than low-density tapes when you install it behind a diffuser.

Build and light quality
The tape is built on a 2 oz density white PCB just 12 mm wide, slim enough to slide into most aluminum extrusions, coves and cabinet reveals, and flexible enough to follow curves and corners. Heavier copper helps carry current and manage heat over long runs. The CRI 90+ rating is the spec that really shows on the wall: countertops, backsplashes, millwork, merchandise and artwork keep their true colour, which is exactly what you want in a kitchen, a retail display or a bathroom mirror niche. The 120° beam angle spreads light wide and washes surfaces evenly rather than throwing a narrow stripe.

Technical specifications
Product code: LCLS24V-96W-RGBW35K-IP22
Type: RGBW LED strip, white channel 3500K
Power consumption: 19.2W/M
Voltage: 24V DC
LED density: 120 LEDs/m
CRI: 90+
Beam angle: 120º
Segment width: 12 mm
Board type: 2 oz density, white PCB
Reel length: 5 m
Cuttable segments: 50 mm
Mounting: 3M double-sided tape (non-porous surfaces)
Protection rating: IP22
Operating temperature: -25°C to 60°C
Dimming: DMX, PWM, RF PWM, 0-10V, MLV incandescent
UL: Yes
Lifespan: 50,000+ hours

Wiring, control and installation
Plan the job around a 24V DC power supply sized for the total wattage of your run, plus an RGBW controller or decoder matched to your control method — DMX, PWM, RF PWM, 0-10V or MLV incandescent dimming are all supported, so the strip can live inside a home automation system or on a simple wall dimmer. The spec sheet includes a connection guide: parallel connections are strongly recommended, and you should never exceed the recommended run length, because the tape will start to dim past that point and will be damaged over time. For one long continuous line, use a middle connection — a feed wire brought to the centre of the run — to keep brightness even end to end. Cut only on the marked 50 mm points, solder or use proper RGBW connectors, clean the surface before applying the 3M tape, and remember this is an IP22 tape meant for dry, protected indoor locations; a waterproof IP66 version exists for wet or outdoor-adjacent areas.

Where to use it and what pairs with it
Think crown-mould coves in a living room, under-cabinet and toe-kick lighting in a kitchen, a colour-changing wash behind a media wall, stair nosings in a basement, backlit bar shelving in a restaurant, display cases in a boutique or a hotel reception desk that changes colour for events. In the same catalogue family you'll find single-colour and tunable options that share the 24V platform: the LED strip 19.2W/m 24V 96W 30K IP66 for damp or outdoor-rated runs, the LED strip 20W/m 24V 100W IP22 (CCT) when you want adjustable white instead of colour, and the LED strip 14.4W/m 24V 72W (RGB) IP22 for pure colour effects. The full technical PDF (LCLS24V-96W-RGBW35K-IP22 Spec Sheet), including the dimensional drawing and the parallel and middle connection guides, is available in the Documentation tab.

Technical Files