16FT OPAL DIFFUSER LENS – LED PROFILE #80

Name: 16FT OPAL DIFFUSER LENS – LED PROFILE #80
Brand: LEDCO
SKU: LCLENS-OPAQ80-16FT
Price: 45.97 CAD
Availability: InStock

SKU: LCLENS-OPAQ80-16FT

Brand: LEDCO

Say goodbye to that dotted, glarey line of LEDs showing through your channel. This 16FT opal diffuser lens is the replacement cover made specifically for LED profile #80, and it turns a raw strip of diodes into one smooth, continuous band of light. People look for it under a lot of names — opal lens, opaque lens, extruded light lens, aluminum extrusion c/w translucent lens, diffuser cover for aluminum profile for LED strip lighting — but it is all the same simple, essential part. Whether you are building a cove detail in a living room, a lit toe-kick under kitchen cabinets, a long run over a reception desk or a clean line in a retail display, the lens is what makes the finished job look professional instead of homemade.

Sold as a 16-foot length under SKU LCLENS-OPAQ80-16FT, this opal diffuser snaps into the track of LED profile #80 and no other channel — the fit is profile-specific, which is exactly why buying the matching lens matters. The 16 ft format means fewer joints across a long run, so you see fewer seams and get a more uniform glow from end to end. The opal (milky) finish softens hotspots and hides the individual LED dots, while the material cuts easily on site with a fine-tooth blade or a mitre saw so you can trim it to the exact length of your channel.

It is right at home in basement coves and stairwells, under kitchen and bathroom cabinets, in closets, home offices, condo hallways, restaurants, salons, offices and retail shelving — anywhere a LED strip channel is visible and needs a clean finish. Canadian renovators love it for long continuous runs in open-concept spaces where every metre is in plain view, and contractors keep spare lengths on the truck for damaged or missing covers. If your project uses other extrusions, check out the matching 8ft opal diffuser lens – LED profile #80 for shorter runs, or the 16ft opal diffuser lens – LED profile #44 if you are working with profile #44. Measure your channel, confirm it is a #80, and order the right lens the first time.

Compatible with
Works with:
Channel / profile: LCPROF-80-16FT, LCPROF-80-8FT

Built for one job, and it does it well
This is the opal diffuser lens designed for LED profile #80, supplied in a 16-foot length. Lenses for LED extrusions are not universal: each profile has its own groove width and locking geometry, so a cover made for another channel will either refuse to seat or pop out over time. Ordering LCLENS-OPAQ80-16FT means the cover slides or snaps into the #80 track the way it was engineered to, sitting flush with the aluminum edges for a tidy, finished line.

Light quality: from dots to a solid line
A bare LED tape shows every diode, and in a cove or under a cabinet those hotspots reflect off counters, backsplashes and ceilings. The opal (milky) diffusion spreads the light laterally before it leaves the channel, blending the individual points into one even band. The trade-off is normal and expected with any diffuser: an opal lens is softer and more forgiving on glare than a clear cover, which is exactly what you want anywhere the fixture sits at eye level or where people work, eat or relax under it.

Technical specifications
SKU: LCLENS-OPAQ80-16FT
Product: Opal diffuser lens for LED profile
Compatible profile: #80
Length: 16 ft
Finish: Opal / opaque diffuser
Category: End caps, lenses and accessories
Use: Residential and commercial projects

Installation and handling
Cut the lens to the same length as your extrusion using a fine-tooth blade, a mitre saw or a sharp utility knife with a straightedge; go slow and support the full length so the edges stay square, then deburr the cut with light sanding for a clean butt joint. Install the LED strip and make your electrical connections first, test the run, then fit the lens last so you never have to pull a finished cover back off. Keep the protective film on until the channel is mounted to avoid scuffs and fingerprints, and on long runs plan your joints where a ceiling break, a corner or a cabinet divider will hide them. End caps finish the exposed ends of the assembly and keep dust out of the channel. Since the lens is a passive optical part, it carries no wiring, no driver and no electrical rating of its own — the LED strip and power supply inside the profile determine the wattage, voltage, colour temperature and dimming behaviour of the finished installation.

Where it earns its keep, and what goes with it
Think long, visible runs: perimeter cove lighting in a basement renovation, under-cabinet task lighting in a kitchen, vanity and mirror surrounds, stair nosings, closet shelving, a reception desk front, retail gondolas and display cases, office workstations and restaurant banquettes. Because it ships in a 16 ft length, it is the practical choice for continuous architectural lines where extra seams would be obvious. Working with more than one extrusion on the same jobsite? The 8ft opal diffuser lens – LED profile #80 covers shorter sections of the same channel, while the 16ft opal diffuser lens – LED profile #44 and the 8ft opal diffuser lens – LED profile #44 serve profile #44. No documents are posted for this accessory; identify your channel by its profile number before ordering, and reach out if you are unsure which lens matches the extrusion already installed.