Built for long runs
Most colour-changing strip systems make you stop and restart every few meters. This 120V RGB LED strip kit is engineered the other way around: a single power outlet feeds a set-up of up to 25 meters, so a whole deck perimeter, a long hallway cove or a full storefront band becomes one continuous, uninterrupted line of light. That means fewer power supplies to hide, fewer junction points to seal, and a much cleaner install. With 60 individual 5050 chips per meter, the light output reads as a smooth ribbon of colour rather than a string of separate dots — which is exactly what you want when the strip is visible from the ground or mounted behind a shallow cove.
Colour, control and the IR remote
The kit is a true RGB LED strip, meaning red, green and blue chips mix to produce a wide palette of colours from one strip. Everything is driven by a waterproof infra-red controller that is cETLus Listed and rated for outdoor usage. It's a rugged little unit with two molded brackets, so it can be screwed to a joist, a post, a soffit edge or an interior wall in seconds. One important planning note: infra-red technology needs a clear path between the remote and the receiver, so choose a mounting spot where the signal can reach — inside a sealed metal box or behind a wall is not the place for it. If you plan to install multiple runs, think about controller placement first and the rest of the layout falls into line.
Technical specifications
SKU: RGB120V25
Brand: LED Montreal
Voltage: 120V
Maximum run length: up to 25 meters from a single power outlet
Total power: 200W
Consumption: between 7 and 9 W per meter, depending on the colour selected
LED type: 5050 RGB, 60 chips per meter
Controller: waterproof infra-red, cETLus Listed, rated for outdoor usage, 2 molded brackets
Certification: all components certified to Canadian and US standards by ETL Intertek
Use: indoor and outdoor, year-round
Where people actually use it
Homeowners run it under deck railings and stair nosings, around pergolas, along fences, behind headboards and inside kitchen toe-kicks. Contractors use it to outline rooflines and commercial façades, to wash long corridors with accent colour, and to give restaurants, bars, salons and gyms a signature look that changes with the season or the event. Because the whole kit is rated for indoor and outdoor use year-round, the same product can handle a summer patio and a winter roofline without swapping hardware. For long exterior runs, plan your fixing points before you start — clips, channel or a straight bead of adhesive on a clean, dry surface all work, as long as the strip is supported and not stretched around corners.
Installation, safety and documentation
Because this is a 120V LED strip system, it connects to a standard outlet rather than a low-voltage driver, which is what makes the long run possible — but it also means the connections and end caps must be assembled exactly as supplied, especially outdoors, and any permanent wiring should follow local electrical code. Keep the controller accessible for the remote, seal every cut and connection point outdoors, and avoid tight kinks in the strip. All components of this kit carry ETL Intertek certification to Canadian and US standards, and the controller itself is cETLus Listed for outdoor usage, so the kit is suited to both residential and commercial projects. Questions about layout, controller placement or how far your run needs to go? Our team is glad to help you plan it before you buy.
