XL TRIM RING FOR SLM6 PLUS ROUND - METAL - BRUSHED NICKEL - SLM6P-XLRING-BN

Name: XL TRIM RING FOR SLM6 PLUS ROUND - METAL - BRUSHED NICKEL - SLM6P-XLRING-BN
Brand: LITELINE
SKU: SLM6P-XLRING-BN
Price: 22.97 CAD
Availability: InStock

SKU: SLM6P-XLRING-BN

Brand: LITELINE

Hole in the ceiling too big for your new pot light? The XL trim ring for 6" SlimLED Plus in brushed nickel (SKU SLM6P-XLRING-BN) is the clean, professional fix. This extra-large round trim ring slips around a 6" round slim recessed light and covers an oversized or enlarged ceiling opening, the kind you often find when you replace old pot lights or cans with thin LED fixtures. Instead of patching drywall, sanding and repainting, you simply add the ring and get a neat, finished edge around your round LED light.

The ring is made of stamped steel for rigidity, so it stays flat and true against the ceiling, and it is finished with UV-stabilized paint in a warm brushed nickel tone that pairs beautifully with nickel faucets, cabinet hardware and bathroom accessories. A silicone gasket is included to maintain the wet location rating of compatible fixtures, which means you can use it in a bathroom, above a shower or under a covered exterior soffit without compromising the fixture's protection. It is designed for the 6" round SlimLED Plus family, including the SlimLED Plus 6" slim recessed light, and for the round 6" SKYE and OnCloud versions of these fixtures.

It is the go-to accessory for Canadian renovations: basement ceilings where old holes were cut wide, kitchens switching from halogen cans to slim LED pot lights, condos where the existing openings do not match the new fixture, and commercial spaces refreshing their lighting overnight. Contractors keep a few on hand to save time on callbacks and patch jobs. Add this brushed nickel XL trim ring to your order and finish every opening like a pro.

Compatible with
Works with:
Fixture: SLM6-16W-CCT-WH

What an XL trim ring does
When you upgrade to slim LED recessed lights, the old ceiling holes are often larger or more irregular than the new fixture's trim. The SLM6P-XLRING-BN is an extra-large round ring that fits around a 6" round SlimLED Plus fixture and hides the gap. The result is a clean, uniform border, with no visible drywall damage, no patching and no repainting. It is also handy when a hole was cut too wide by mistake on a new build.

Construction and finish
The ring's body is stamped steel, chosen for rigidity so it sits flat against the ceiling surface without warping. It is finished with UV-stabilized paint in brushed nickel to match compatible fixtures, a soft metallic tone that looks at home in modern kitchens, bathrooms and living rooms. A silicone gasket is included so the fixture keeps its wet location rating once the ring is installed, an important detail in a shower zone, a humid bathroom or an exterior soffit.

Compatibility
This ring is designed for the 6" round slim recessed fixtures of the SlimLED Plus family, including SlimLED Plus DTW and SlimLED OnCloud, as well as the round 6" SKYE and SKYE OnCloud fixtures. A typical match is the SlimLED Plus 6" LED slim recessed light. Always make sure you choose the ring that matches the size of your fixture: a separate, smaller version exists for the smaller size of these fixtures, so double-check before ordering.

Installation tips
Turn off the power, connect the slim recessed light as usual, then place the XL ring around the fixture before pushing it up into the ceiling so the ring is held between the fixture's trim and the ceiling. Check that the silicone gasket is seated evenly if the fixture is in a wet area. Because everything happens from below, the ring adds only a few seconds to each installation, and it can save hours of drywall repair on a large renovation.

Where it helps most
Use it in basement renovations, kitchen and bathroom makeovers, condo upgrades and commercial retrofits where old cans are being replaced by slim LED fixtures. In a bright white kitchen or a spa-style bathroom, the brushed nickel finish is a stylish choice when you want the lights to echo metal accents in the room rather than disappear into the ceiling.