XL TRIM RING FOR SLM6 PLUS ROUND - METAL - WHITE - SLM6P-XLRING-WH

Name: XL TRIM RING FOR SLM6 PLUS ROUND - METAL - WHITE - SLM6P-XLRING-WH
Brand: LITELINE
SKU: SLM6P-XLRING-WH
Price: 22.97 CAD
Availability: InStock

SKU: SLM6P-XLRING-WH

Brand: LITELINE

Replacing old pot lights and left with holes that are too wide? The XL trim ring for 6" SlimLED Plus in white (SKU SLM6P-XLRING-WH) gives you a clean finish without touching a trowel. This extra-large round trim ring sits around a 6" round slim recessed light and covers an oversized or enlarged ceiling opening, a common situation when you swap bulky cans or halogen pot lights for thin LED fixtures. No drywall patching, no sanding, no repainting: just a crisp, uniform white border around your round LED pot light.

Made of stamped steel for rigidity, the ring stays flat against the ceiling, and its UV-stabilized white paint is designed to match compatible fixtures, so the ring and the light read as one clean piece on a white ceiling. A silicone gasket is included to maintain the wet location rating of compatible fixtures, which lets you use the ring in a bathroom, above a bathtub or shower, or under a covered exterior soffit. It is made for the 6" round SlimLED Plus family, such as the SlimLED Plus 6" slim recessed light in white, and for the round 6" SKYE and OnCloud versions.

Across Canada, it is a time-saver for basement renovations with old oversized holes, kitchen upgrades from halogen cans to slim LED recessed lights, condo projects where existing openings do not line up with new fixtures, and offices or stores being retrofitted quickly. Electricians and renovators keep a few in the truck to avoid patch jobs and callbacks. Add this white XL trim ring to your project and give every ceiling opening a flawless finish.

Compatible with
Works with:
Fixture: SLM6-16W-CCT-WH

The easy fix for oversized ceiling holes
Slim LED recessed lights are thinner and often have a smaller trim than the old cans they replace. The SLM6P-XLRING-WH is an extra-large round ring that fits around a 6" round SlimLED Plus fixture and hides the gap between the fixture and a hole that was cut wider. You get a tidy, even border instead of damaged drywall. It is equally useful on a new build when a hole was cut too big by mistake or with a slightly irregular edge.

Construction and white finish
The body is stamped steel for rigidity, so the ring stays flat and does not bend when pressed against the ceiling. It is finished with UV-stabilized white paint to match compatible fixtures, which keeps the ring's colour consistent with the light itself and with a white painted ceiling. A silicone gasket is included so the fixture keeps its wet location rating after the ring is added, which matters in showers, humid bathrooms, laundry rooms and exterior soffits.

Compatible fixtures
This ring is designed for the 6" round slim recessed fixtures of the SlimLED Plus family, including SlimLED Plus DTW and SlimLED OnCloud, and for the round 6" SKYE and SKYE OnCloud fixtures. A typical pairing is the SlimLED Plus 6" LED slim recessed light in white. Choose the ring size that matches your fixture: a smaller version exists for the smaller size of these slim lights.

How to install it
Turn off the power at the breaker, connect the slim recessed light as you normally would, then place the XL ring around the fixture before pushing it up into the opening. The ring is held between the fixture's trim and the ceiling surface. If the light goes in a wet area, check that the silicone gasket is seated evenly all around. Everything is done from below, so the ring adds only a moment to each installation and can save hours of repair work.

Where it is most useful
Use it in basement finishing, kitchen and bathroom renovations, condo upgrades and commercial retrofits where old cans are being replaced by slim LED pot lights. White is the most discreet choice on a standard white ceiling, letting the light blend in while the room gets a fresh, modern look.