LL11-15-16 - OPAQUE LENS FOR ALUMINUM CHANNEL, 1M (3.28') LENGTH

Name: LL11-15-16 - OPAQUE LENS FOR ALUMINUM CHANNEL, 1M (3.28') LENGTH
Brand: LUMENSTARLED
SKU: LS-LL11-15-16-OP-L1
Price: 8.97 CAD
Availability: InStock

SKU: LS-LL11-15-16-OP-L1

Brand: LUMENSTARLED

Give your LED strip runs that clean, continuous glow instead of a row of visible dots — that is exactly what the LL11-15-16 opaque lens is made for. This is the replacement cover (also called a diffuser, lens or cover) that snaps onto the matching LS-LL11 LED aluminum channel, the low surface-mount profile many people search for as an aluminum extrusion for LED strip lighting or simply an aluminum profile. Sold in a 1M (3.28') length, it lets you plan your layout run by run and order the exact quantity your project calls for, from a short under-cabinet accent to a long continuous cove.

The lens is designed specifically for the LS-LL11 low surface LED aluminum profile, whose extrusion measures W30 x H7mm (W1 3/16 x H9/32") and is built from anodized aluminum. Because the channel is offered in 1M (40") and 2M (80") lengths, keeping spare 1M covers on hand makes it easy to finish a run cleanly or replace a scratched section without redoing the whole installation. The LS-LL11 profile is a surface mount design and works with solderless connectors in the 3528 format, so the cover you choose has a direct impact on the final look: an opaque diffuser softens the light and hides the chip pattern, while the aluminum body underneath keeps everything tidy and well supported. It slides or snaps into place with no adhesive and no special tools.

This is the finishing touch for kitchens and under-cabinet lighting, ceiling coves, display cases, retail shelving, reception desks, closets, stair nosings and basement renovations — anywhere the fixture sits in the customer's line of sight. Canadian contractors, cabinetmakers, interior designers and DIY renovators use it to bring older installations back to life or to complete new ones cleanly. Remember: this lens fits the LS-LL11 aluminum channel only, so measure your existing profile (W30 x H7mm) before ordering. Order SKU LS-LL11-15-16-OP-L1 by the metre and give your LED strip project the polished, professional finish it deserves.

Compatible with
Works with:
Channel / profile: LS-LL11-AL-L1, LS-LL11-AL-L2, LS-LL11-L1, LS-LL11-L2, LS-LL15-AL-L1, LS-LL15-AL-L2, LS-LL15-L1, LS-LL15-L2

What this part is
The LL11-15-16 is a 1M (3.28') lens for the LS-LL11 low surface LED aluminum profile by LUMENSTARLED. It is the top cover of the assembly: the anodized aluminum extrusion carries and cools the LED tape, and the lens closes the channel, protects the strip from dust and fingers, and shapes the light you actually see. Buying the lens separately means you can replace a damaged cover, change the look of an existing installation, or simply keep spares on the truck for long commercial runs.

Technical specifications
SKU: LS-LL11-15-16-OP-L1
Brand: LUMENSTARLED
Fits profile: LS-LL11 low surface LED aluminum profile
Lens length: 1M (3.28')
Profile dimensions (WxH): W30 x H7mm (W1 3/16 x H9/32")
Profile lengths available: 1M (40"), 2M (80")
Profile material: anodized aluminum
Installation: surface mount
Compatible solderless connectors: 3528

Light quality and finish
A diffusing cover is what turns a strip of individual diodes into one smooth line of light. Set inside the 30mm-wide channel, it spreads the output evenly along the full metre so the run reads as a single ribbon rather than a series of bright points. That matters most when the profile is mounted at eye level or below a cabinet where people look straight into it. The low 7mm height of the LS-LL11 extrusion also keeps the whole assembly discreet against a ceiling, a shelf or a toe-kick, so the light is what people notice — not the hardware.

Installation and compatibility
Installation is straightforward: mount the LS-LL11 channel to the surface, lay your LED tape inside, make your connections, then press the lens into the top groove until it seats along the full length. No adhesive, no glue, no specialized tooling. Cut it to length with a fine-tooth blade if your run does not land on an even metre. Because the LS-LL11 is a surface mount profile and accepts 3528 solderless connectors, it is a natural fit for retrofits where you are adding LED strip lighting to existing millwork rather than cutting into drywall. Always confirm that your current channel is an LS-LL11 with a W30 x H7mm section before ordering, since lenses are not interchangeable between profile families.

Where it works and what you get
Typical projects include kitchen under-cabinet lighting, ceiling and crown coves in living rooms and condos, display cases and jewellery counters, bar fronts, retail shelving, office reception walls, stairwells and garage workbenches. In renovation work across Canada, it is also the quick fix for a run whose original cover was scratched during construction or yellowed in a sunny room. The technical PDF for the LOW SURFACE LED ALUMINUM PROFILE is available in the Documentation tab of this page, with the profile dimensions, lengths and compatibility details you need to confirm the fit before you order.

Technical Files