LL11-15-16 - OPAQUE LENS FOR ALUMINUM CHANNEL, 2M (6.56') LENGTH

Name: LL11-15-16 - OPAQUE LENS FOR ALUMINUM CHANNEL, 2M (6.56') LENGTH
Brand: LUMENSTARLED
SKU: LS-LL11-15-16-OP-L2
Price: 16.97 CAD
Availability: InStock

SKU: LS-LL11-15-16-OP-L2

Brand: LUMENSTARLED

Say goodbye to that dotted, spotty look along your LED strip. The LL11-15-16 opaque lens is the frosted diffuser cover made to snap onto the LL11-15-16 LED aluminum channel — the piece people search for as an aluminum extrusion cover, a lens for aluminum profile, or simply the milky cover for an aluminum profile for LED strip lighting. It replaces or upgrades the clear cover of your surface-mount profile and turns a line of individual diodes into one smooth, continuous band of light. Sold in a 2M (6.56') length, SKU LS-LL11-15-16-OP-L2 by LumenstarLED.

This is a frosted lens style designed for the LS-LL11 LOW SURFACE LED aluminum profile, a surface-mount extrusion made of anodized aluminum measuring W30 x H7mm (W1 3/16 x H9/32"). The lens comes in a 2M (80") length, matching the profile's 1M (40") and 2M (80") options, so your cover and your channel always line up. Because it diffuses instead of simply protecting, it softens hot spots, hides the LED chips and keeps the visible surface looking even from end to end — the difference between a strip stuck on a shelf and a real architectural light line. It slides or snaps into place with no extra hardware, can be cut to length with standard tools, and pieces can be butted end to end for long continuous runs.

Where does it shine? Under kitchen cabinets, in cove and crown ceilings, behind headboards and floating shelves, inside display cases and retail millwork, along stairs, reception desks and bar fronts — anywhere in a Canadian home, condo, clinic, café or boutique where you want the glow and not the dots. It is the exact match for the LL11-15-16 aluminum channel and works with the LED strips compatible with that profile (except Indoor and MP Flex strips) as well as 3528 solderless connectors. Order the length you need, pair it with your channel and strip, and finish your linear lighting project the clean way.

Compatible with
Works with:
Channel / profile: LS-LL11-AL-L1, LS-LL11-AL-L2, LS-LL11-L1, LS-LL11-L2, LS-LL15-AL-L1, LS-LL15-AL-L2, LS-LL15-L1, LS-LL15-L2

A diffuser built for one job: erasing the dots
A bare LED strip is a row of bright points. Put the opaque lens over it and those points blend into a single luminous line. That is the whole purpose of this frosted cover for the LS-LL11 LED aluminum channel: it spreads the light across its full surface so the eye reads one continuous band instead of a chain of chips. The result is calmer, more comfortable light — the kind you want at eye level, under a cabinet or in a cove where people look straight at the fixture. It also hides the strip itself, the copper pads and the small imperfections of a hand-cut run, which is why professionals rarely finish a profile with anything else.

Fits the LS-LL11 low surface profile
This lens is made specifically for the LL11-15-16 series, the LOW SURFACE LED aluminum profile from LumenstarLED. That extrusion is a surface mount profile in anodized aluminum with outside dimensions of W30 x H7mm (W1 3/16 x H9/32") — wide and very low, ideal when you want a discreet line that does not stand off the surface. The profile is offered in 1M (40") and 2M (80") lengths; this lens is the 2M (6.56') version, SKU LS-LL11-15-16-OP-L2. Because it is the matching lens style for that channel, there is no guessing about width or snap depth: it seats in the channel and stays there.

Technical specifications
SKU: LS-LL11-15-16-OP-L2
Brand: LUMENSTARLED
Product code (profile series): LS-LL11
Lens style: Frosted
Length: 2M (6.56')
Profile lengths available: 1M (40"), 2M (80")
Profile installation: Surface mount
Profile material: Anodized aluminum
Profile dimensions (WxH): W30 x H7mm (W1 3/16 x H9/32")
Compatible strips: except Indoor & MP Flex
Compatible solderless connectors: 3528

Installation and handling
Work in order: mount the channel first, run and test your LED strip inside it, then install the lens last so nothing is trapped underneath. The cover goes on without screws or clips — press or slide it into the channel until it seats evenly. Need a shorter run? Mark your cut on the profile and on the lens, cut both with a fine-tooth blade or a sharp utility knife scored and snapped, then deburr the edge so the two pieces sit flush. For runs longer than 2M, butt sections end to end and keep the joints tight; a joint that lands under a cabinet edge or at a wall break disappears completely. Keep the strip centred in the channel so the diffusion stays even, and remember that the aluminum body doubles as a heat sink — it helps your strip hold its brightness over the years.

Real projects and documentation
Think kitchen under-cabinet task light, pantry and closet shelving, cove lighting in a living room ceiling, toe-kick and stair nosing accents, backlit mirrors and headboards, jewellery and bakery display cases, retail shelving, reception counters and bar fronts in restaurants. In Canadian renovations, the low W30 x H7mm section is handy under thin shelves and inside millwork where a taller profile would show. The technical PDF for the LOW SURFACE LED ALUMINUM PROFILE is available in the Documentation tab of this page — check it before ordering to confirm the length and strip compatibility for your run.

Technical Files