LL14 - FROSTED LENS FOR BENDABLE ALUMINUM CHANNEL, 2M (6.56') LENGTH

Name: LL14 - FROSTED LENS FOR BENDABLE ALUMINUM CHANNEL, 2M (6.56') LENGTH
Brand: LUMENSTARLED
SKU: LS-LL14-FR-L2
Price: 20.97 CAD
Availability: InStock

SKU: LS-LL14-FR-L2

Brand: LUMENSTARLED

Curves shouldn't mean compromises. The LL14 frosted lens is the flexible diffuser cover made for bendable LED aluminum channel, and it's the piece that turns a strip of visible diodes into one clean, continuous line of light. People search for it under many names — frosted lens, diffuser cover, LED channel lens, milky cover, or simply a lens for an aluminum profile for LED strip lighting — and it all points to the same job: snapping over your bendable profile and softening the beam. Supplied in a 2M (6.56') length, it's the cover you reach for when your run follows an arc, a radius in millwork, a rounded cove or a curved stair nosing, and a rigid extruded aluminum cover simply won't follow the shape.

This is the frosted lens style from the LumenstarLED flexible aluminum channel system, product code LS-LL14, offered here as SKU LS-LL14-FR-L2 in the 2M length (the same lens is also part of a family offered in 40" (1M) / 2M (80") lengths). It matches the channel's profile dimensions of W3/4 x H1/4” (W18 x H6mm), the same figures used for the router pocket, so the fit stays tight and rattle-free along the whole run. The frosted surface scatters the light as it leaves the tape, hiding individual diodes and delivering the even, hotspot-free glow that clear covers can't give you. Because it flexes with the anodized aluminum channel, you keep consistent contact with the extrusion from end to end, even through tight bends.

Where does it shine? Curved cove ceilings in a living room, rounded island kickspaces and under-cabinet runs in a kitchen, staircase edge lighting, reception desks, retail display curves, salon and clinic millwork — anywhere a Canadian renovation or build calls for a soft architectural line instead of a row of dots. It is made to sit on the LumenstarLED flexible aluminum channel (surface mount, router dimensions W3/4 x H1/4” / W18 x H6mm), and the channel itself is compatible with Except, Indoor & Outdoor Flex strips. One 2M piece covers most single runs without joints, which keeps your planning simple and your offcuts minimal. Check the technical PDF in the Documentation tab, match your channel length, and order the lens that finishes the job properly.

Compatible with
Works with:
Channel / profile: LS-LL14-L1, LS-LL14-L2

Built for channels that bend
Most diffuser lenses are made for straight extruded aluminum profiles and crack or pop out the moment you ask them to follow a radius. The LL14 frosted lens is different: it is the lens specified for the LumenstarLED flexible aluminum channel, so it bends along with the profile and keeps full contact with the extrusion walls from one end to the other. That means no gaps where light leaks out, no sections that lift away from the LED aluminum channel, and a finished edge that looks intentional rather than improvised. In the family, this lens carries the product code LS-LL14 and is listed in a frosted lens style.

Light quality: no dots, just a line
A clear cover shows you every diode. A frosted lens scatters the emitted light as it passes through, blending the individual points into one continuous band. On a curve, this matters even more, because the eye follows the arc and any hotspot pattern becomes obvious. Cove details, stair nosings, handrails and rounded millwork all read better with a diffused surface, and your LED strip keeps its intended look whether you're standing close to the detail or across the room.

Technical specifications
Product code: LS-LL14
SKU: LS-LL14-FR-L2
Brand: LUMENSTARLED
Lens style: Frosted
Length: 2M (6.56')
Family lengths: 40” (1M) / 2M (80")
Dimensions (LxWxH): W3/4 x H1/4” (W18 x H6mm)
Router dimensions: W3/4 x H1/4” (W18 x H6mm)
Installation: Surface mount
Channel material: Anodized aluminum
Compatible strips (channel): Except, Indoor & Outdoor Flex

Installation and compatibility
The system is a surface mount assembly: fix the flexible aluminum profile for LED strip lighting to the substrate, lay your tape inside, then press the frosted lens into the channel opening. Work in the direction of the curve and seat the lens progressively rather than forcing a long section at once. The channel accepts Except, Indoor & Outdoor Flex strips, and if you are routing a pocket into wood or MDF, the W3/4 x H1/4” (W18 x H6mm) router dimensions from the spec sheet give you the groove to cut. Plan your runs so a single 2M lens covers each continuous segment wherever possible — fewer joints means fewer visible seams in the diffused line.

Applications and documentation
Think curved cove ceilings in a condo living room, a rounded kitchen island toe-kick, a wrapped bulkhead in a restaurant, display curves in a boutique, stair edge lighting in a custom home, or reception millwork in a clinic or office. Contractors, cabinetmakers and DIY renovators all end up needing the same thing: a diffuser that follows the shape their client drew. The technical PDF for the flexible aluminum channel is available in the Documentation tab with the dimensions, lens style and compatibility details — download it before cutting your millwork so the pocket, the channel and the lens all agree.

Technical Files