LL11-15-16 - FROSTED LENS FOR ALUMINUM CHANNEL, 1M (3.28') LENGTH

Name: LL11-15-16 - FROSTED LENS FOR ALUMINUM CHANNEL, 1M (3.28') LENGTH
Brand: LUMENSTARLED
SKU: LS-LL11-15-16-FR-L1
Price: 8.97 CAD
Availability: InStock

SKU: LS-LL11-15-16-FR-L1

Brand: LUMENSTARLED

Say goodbye to that dotted line of bright spots showing through your LED strip lighting. The LUMENSTARLED LL11-15-16 frosted lens is the snap-in diffuser cover made for the LS-LL11 low surface LED aluminum channel — the piece people are really looking for when they search for an aluminum extrusion, an aluminum profile for LED strip lighting, or simply a replacement cover for a profile they already own. Sold in a 1M (3.28') length, it slides onto the top of the extrusion and turns a row of individual diodes into one smooth, continuous band of light. It is the finishing touch on under-cabinet lighting, cove and ceiling perimeter lighting, display cases, shelving, staircases, closets and any architectural accent detail where you want to see the light, not the LEDs.

This is the frosted lens style specified for the LS-LL11 profile family, whose extrusion measures W30 x H7mm (W1 3/16 x H9/32") and is built from anodized aluminum for surface mount installation. The 1M (40") length matches the shorter of the two profile lengths offered (1M and 2M), so you can order lens and channel in matching runs, or cut a longer piece down when you need a custom segment. The frosted surface scatters light across the full width of the opening, softening glare and hiding the hot spots that make an uncovered strip look unfinished. Because the diffuser simply snaps into the channel, no glue, no fasteners and no special tooling are needed — a real time saver when you are trimming, fitting and re-fitting sections on site. Once in place it also shields the tape light from dust and fingers, which helps your installation keep looking sharp season after season. SKU: LS-LL11-15-16-FR-L1.

Contractors and cabinet makers across Canada reach for this diffuser cover on kitchen millwork, bathroom vanities, home theatre coves, basement stair nosings, reception desks, retail shelving and restaurant bars — anywhere the strip sits close to the eye and a bare LED would be uncomfortable to look at. It is designed to work in harmony with the LS-LL11 low surface profile and the strip types that profile accepts (all but Indoor & MP Flex), along with 3528 solderless connectors. Keep a few spare 1M lengths on the truck for damaged covers and last-minute additions — order the frosted lens that finishes your aluminum profile for LED run properly.

Compatible with
Works with:
Channel / profile: LS-LL11-AL-L1, LS-LL11-AL-L2, LS-LL11-L1, LS-LL11-L2, LS-LL15-AL-L1, LS-LL15-AL-L2, LS-LL15-L1, LS-LL15-L2

Built for the LS-LL11 low surface profile
This frosted lens is not a universal one-size-fits-all cover: it is the diffuser matched to the LS-LL11 low surface LED aluminum profile, an anodized aluminum extrusion designed for surface mount installation and measuring W30 x H7mm (W1 3/16 x H9/32"). The lens runs the full 1M (3.28') length, so when you pair it with a 1M channel you get end-to-end coverage with no gap at the joints, and when you run several segments side by side the diffusion stays consistent from one piece to the next. Because the profile family is also offered in 2M (80"), two of these 1M lenses will dress a full 2M run, or you can trim a length to suit a shorter shelf or riser.

Light quality and visual comfort
An uncovered LED tape shows every diode as a bright point, and on a low-height channel those points are right at eye level. The frosted lens style disperses that light across the whole surface of the opening, blending the diodes into one soft, even band. The result reads as architectural lighting rather than a strip of components: gentler on the eyes under a wall cabinet, cleaner in a glass display case, and far more flattering along a cove or a stair stringer. The diffuser also adds a physical barrier over the tape, keeping dust, grease and curious fingers off the emitters — a small detail that matters a lot in kitchens, retail displays and hospitality spaces.

Technical specifications
SKU: LS-LL11-15-16-FR-L1
Brand: LUMENSTARLED
Product code (profile family): LS-LL11
Type: Frosted lens / diffuser for LED aluminum channel
Length: 1M (3.28')
Profile installation: Surface mount
Profile material: Anodized aluminum
Profile dimensions (LxWxH): W30 x H7mm (W1 3/16 x H9/32")
Available profile lengths: 1M (40"), 2M (80")
Lens style: Frosted
Compatible strips: Except, Indoor & MP Flex
Compatible solderless connectors: 3528

Installation and compatibility
Installation is about as simple as lighting gets. Mount the LS-LL11 channel to the surface, lay your tape light inside the base, make your connections with 3528 solderless connectors where needed, then press the frosted lens into the channel until it snaps home. No adhesive, no clips to fight with, no specialty tools. If you need to service the strip later, the cover comes back off without damaging the extrusion. One compatibility note worth respecting: this profile accepts standard strip formats but not Indoor & MP Flex product, so confirm your tape before you order. On long runs, plan your power feed and driver location before the lens goes on — it is much easier to route the leads out of an open channel than a closed one.

Where it earns its keep, and documentation
Think kitchen under-cabinet and toe-kick lighting, bathroom vanity and mirror surrounds, closet and pantry shelving, basement stair nosings, home theatre coves, bookcase and display-case accents, plus the commercial side: retail shelving, jewellery and bakery cases, reception desks, restaurant bars and hotel corridors. In Canadian renovations where ceiling heights are tight and every fixture is close to the eye, a low-profile channel with a frosted diffuser cover is often the difference between a build that looks custom and one that looks improvised. The technical PDF for the LOW SURFACE LED ALUMINUM PROFILE is available in the Documentation tab — check the dimensions and strip compatibility there before ordering your LED aluminum channel lengths and lenses together.

Technical Files