LED BULB ST19 5W

Name: LED BULB ST19 5W
Brand: LEDCO
SKU: LCB-ST19-5W-30K
Price: 10.97 CAD
Availability: InStock

SKU: LCB-ST19-5W-30K

Brand: LEDCO

Bring back the glow of the old general store, without the old power bill. This ST19 LED bulb (SKU LCB-ST19-5W-30K) is a filament-style vintage lamp with a tall, tapered clear glass envelope and slender filaments meant to be seen. People look for it as an ST19 led bulb, an Edison-style filament bulb, a decorative antique bulb or simply a vintage E26 lamp — whatever you call it, it turns an ordinary socket into a design detail. It was made for chandeliers, wall sconces, cage fixtures, bare-socket pendants over an island, and any open fixture where the bulb itself is part of the look.

Behind the nostalgic look is real technology. It draws only 5W while delivering 600 lumens, enough to replace a 60W incandescent bulb, on standard 120V power with a familiar E26 medium screw base. The 3000K colour temperature gives a warm, welcoming white, and a CRI of 80+ keeps wood, brick, textiles and skin tones looking natural. The 330° beam angle spreads light all around the bulb instead of shooting it in one direction, and the clear glass lets those long filaments shine. It is dimmable with a compatible dimmer, rated for damp locations, built with low-flicker electronics (reduced flicker down to 10%), and rated for 15,000 hours of life (L70) with a 2-year limited warranty. Operating temperature range: -20 ˚C to +40 ˚C. Dimensions are 2.52 in. maximum overall diameter by 5.39 in. maximum overall length.

It shines over a dining table, in a stairwell chandelier, along a row of pendants in a café or barber shop, in restaurant and bistro sconces, on a covered porch or a screened veranda thanks to the damp location rating — a real advantage through a Canadian shoulder season. For a coordinated project, mix it with other bulbs from the same family, like the LED bulb B10 5W for candelabra-style arms or the LED bulb G30 5W for round globe fixtures. Order your ST19 filament bulbs by the fixture, or by the row, and give every socket in the room the same warm 3000K glow.

A filament bulb built to be looked at
The whole point of an ST19 filament LED bulb is the filament itself. Here the filaments are longer, which makes the lamp both brighter and better-looking inside a clear glass envelope, with nothing to hide behind a diffuser. The shape is the classic tapered tube silhouette people associate with old storefronts and workshops, sized at 2.52 in. maximum overall diameter and 5.39 in. maximum overall length, so it stands proud of a socket cup or a cage guard instead of disappearing into it. Because the light emits through a 330° beam angle, the bulb glows in every direction — exactly what you want in an open pendant, a chandelier arm or a bare-socket fixture where the lamp is the decoration.

Light quality and eye comfort
This lamp belongs to a low-flicker series: flicker is reduced down to 10%, compared with 6.6% for a traditional incandescent and far below the California T20 standard of 30%. In plain language, the light stays steady, which is easier on the eyes in a dining room, an office corner or a long shift behind a counter, and it behaves better on camera. The 3000K colour temperature lands in the warm white range, cozy without being orange, and the CRI of 80+ keeps colours honest — wood grain, brick, upholstery and food all read the way they should. At 600 lumens from just 5W, it stands in for a 60W incandescent while using a fraction of the energy, which adds up fast in a fixture holding five or six lamps.

Technical specifications
SKU: LCB-ST19-5W-30K
Lamp type: ST19, low flicker
Wattage: 5W
Initial lumens: 600 lm
Incandescent replacement: 60W
Colour temperature: 3000K
CRI: 80
Base: E26
Voltage: 120V
Beam angle: 330°
Cover: clear glass
Dimmable: yes, with a compatible dimmer
Rated life: 15,000 hours (L70)
Location rating: damp location rated
Operating temperature: -20 ˚C to +40 ˚C
M.O.D.: 2.52 in.
M.O.L.: 5.39 in.
Warranty: 2-year limited

Installation, dimming and compatibility
Installation is as simple as it gets: cut the power, then thread the bulb gently into the standard E26 screw base without over-tightening, holding the glass body rather than twisting near the filament area. Any standard 120V household or commercial line-voltage socket will do. The bulb is dimmable, but as with every filament LED, dimming depends on the dimmer: test one lamp on your existing dimmer before you outfit a whole dining room or a row of pendants, and keep all lamps in the same circuit identical so they dim in step. Since it carries a damp location rating, it can also go in a covered porch fixture, a sheltered entry or a bathroom sconce, as long as it is not exposed to direct water.

Where it works and what to pair it with
Think dining rooms and kitchen islands, stairwell chandeliers with high ceilings where changing lamps is a chore, cafés, bistros, boutiques, barber shops, Airbnb rentals and lobbies — anywhere the fixture is open and the bulb is visible. For a whole-home or whole-store project with the same warm 3000K tone, pair it with the LED bulb B10 5W in candelabra sconces, the LED bulb G30 5W in globe fixtures and vanity bars, or the LED bulb G4 2.5W for small accent fixtures. The full technical PDF (LCB-ST19-5W-30K Spec Sheet) is in the Documentation tab, with the dimensional drawing and the complete product table if you need to confirm details before ordering.

Technical Files