A globe built to be looked atThe G40 is the largest of the classic globe shapes, and that generous round profile is exactly why designers keep specifying it for open fixtures. This
4W LED globe bulb carries a clear glass cover, so the lamp reads as a jewel-like accent rather than a plain white ball — perfect in Hollywood-style vanity bars, wire-cage pendants and exposed-socket chandeliers. It threads into any standard
E26 medium base socket, so it drops straight into fixtures that were originally built for incandescent or halogen globes, with no adapter and no rewiring.
Light quality and eye comfortTwo things make an exposed lamp comfortable: how it renders colour and how steady it is. This one delivers
80+ CRI at
3000K, a warm white that keeps wood, brass, tile and skin tones looking natural instead of washed out. Just as important, flicker is reduced down to 10% — compared with roughly 6.6% for traditional incandescent and far below the California T20 standard of 30% — which means noticeably less eye strain when you're standing under a mirror bar or working at a counter. The
330° beam angle pushes light in nearly every direction, so a multi-lamp fixture washes the space evenly instead of spotting the ceiling.
Technical specificationsSKU: LCB-G40-4W-30K
Lamp type: G40 Low Flicker, clear cover
Wattage: 4W
Replacement: 40W incandescent
Initial lumens: 350 lm
Colour temperature: 3000K
CRI: 80
Base: E26
Voltage: 120V
Dimmable: Yes
Beam angle: 330°
Average life span: 15,000 hours
Damp location: Yes
M.O.L.: 6.77 in
Operating temperature: -20 ˚C to +40 ˚C
Warranty: 2-year limited
Installation and dimmingInstallation takes a minute: cut the power at the switch or breaker, let the old lamp cool, unscrew it, thread this one in by the base (not the glass) and restore power. Because it is a
dimmable LED bulb, pair it with an LED-compatible dimmer for smooth, flicker-free control down the curve; older incandescent-only dimmers can cause buzzing or drop-out at low levels. Keep it in dry or damp indoor locations — it is
rated for damp locations, so bathrooms and covered entries are fine inside a fixture suited to the spot, but not in direct rain or spray. In a fixture with several sockets, always install the same model and colour temperature in every socket so the bar or chandelier reads as one even line of light.
Where it works and what pairs with itHomeowners love it above the mirror in a main bath or powder room, in island pendants, in a dining chandelier and in bedroom sconces. Contractors and small businesses use it in salons, barbershops, boutiques, cafés, staging areas and hotel corridors where visible lamps are part of the design. To keep a whole project consistent, combine it with the
LED bulb G30 5W 3000K for smaller globe fixtures, the
LED bulb B10 5W 3000K for candelabra chandeliers, and the
LED bulb G4 2.5W for low-voltage accent fixtures. Full details, the dimensional drawing and the complete ordering information are in the technical spec sheet available in the Documentation tab of this page.