FLEXIBLE CONNECTOR FOR H TYPE TRACK - WHITE

Name: FLEXIBLE CONNECTOR FOR H TYPE TRACK - WHITE
Brand: LED MONTREAL
SKU: TRACKACC-W-FLEX
Price: 14.97 CAD
Availability: InStock

SKU: TRACKACC-W-FLEX

Brand: LED MONTREAL

Older houses, condo conversions and custom builds share a secret: very few of their corners are truly square. The white flexible connector for H type track is made for exactly those rooms. Instead of a fixed elbow, it joins two track sections with a flexible bellows, so the angle adapts to the wall, the window bay or the slope of the ceiling in front of you. Anyone searching for an angle adapter, a flexible track coupler, an adjustable track connector or a bendable joiner for track lighting will find the same solution here: one part that lets a white run change direction without breaking the line.

On a white ceiling, the connector stays in the background, so the eye follows the light rather than the hardware. Behind that low-key look, it does serious work: the bellows sets the angle, and the connector maintains electrical continuity, so power travels past the bend and every head on the next section works as usual. That means one continuous circuit around an angled living room, a bay window or a sloped ceiling, instead of two separate runs that each need their own feed. It is the kind of detail that makes white track lighting look planned rather than improvised.

It feels right at home in a century-old house with plaster walls, a chalet with a cathedral ceiling, a gallery with angled partitions or a dental clinic whose reception desk sits at an angle. Within the H type range, it works with the straight white track sections, the track light heads, the white floating canopy that feeds the line from a ceiling box, and the white corner connector when a corner really is square. Map every change of direction on your plan, count one flexible connector for each angled turn, and give your ceiling the continuous line it deserves.

Compatible with
Works with:
Channel / profile: TRACK4-W, TRACK8-W

When the corner is not square
Renovators know the feeling: the plan says the corner is square, the room says otherwise. A rigid corner piece then leaves a gap or pushes the track out of line. This flexible connector takes the opposite approach. Its bellows lets the two H type track sections meet at the angle the room actually has, and the connection carries the circuit across, so the section after the bend is powered exactly like the one before it. One line, one look, even where the architecture refuses to cooperate.

Key specifications
Part: flexible connector, white
Track type: H type
For use with: H type track lighting of the same system
SKU: TRACKACC-W-FLEX

From plan to ceiling
Begin with an accurate survey of the room: check the real angles with a sliding bevel, or trace the lines directly on the ceiling, rather than trusting the drawings. Each turn then gets its part: a corner connector when the angle is truly square, this track connector for the angled ones. Let the bellows take the angle naturally before securing the following section, so nothing is forced. A quick dry fit on the floor, with the sections laid out at the planned angle, helps confirm the layout before anything goes up. Fasten into joists where possible, or use fixings suited to the ceiling material. Only a licensed electrician should connect the feed to the building supply, in line with the Canadian Electrical Code.

Where it makes the difference
A white line that follows a bay window over a breakfast table; a gallery run that bends with an angled partition to light every canvas; a clinic reception where the track follows a desk set at an angle; a chalet living room where the track climbs from the flat ceiling onto the slope to reach the fireplace wall. In each case, the connector lets the track lighting heads go exactly where the light is needed, and they can still be moved and re-aimed later. On bright white ceilings, the whole assembly stays light and airy, the ideal backdrop for white track lighting in homes, clinics, shops and galleries.

Pair it with the right parts
Combine it with the white straight sections and white heads of the same H type track system, and with a white floating canopy for the feed. When a turn really is square, switch to the white corner (L) connector for H type track: it gives a crisp corner, while the flexible connector takes care of the angled turns.

Compatible H-Track system components
• 4 Feet H Type Track - White (TRACK4-W)
• 8 Feet H Type Track - White (TRACK8-W)
• Corner (L) Connector for H Type Track - White (TRACKACC-W)
• Mini Joiner for H Type Track - White (TRACKACC-W-MJ)
• Floating Canopy for H Type Track - White (TRACKPOW-W)
• Monopoint Canopy for H Type Track Head - White (TRACKPOW-W-MONO)
• Live End Connector for H Type Track - White (TRACKPOW-W-LIVE)
• 12W LED Track Light Head for H-Track - White (TRACKL-W)
• 20W 10° To 60° LED Track Light Head for H-Track - White (TRACKLZ-W)
• 15° And 25° Lens for For H Type LED Track Light (TRACKLENS)
• 4 Feet H-Track Light Set: 2 Dimmable 12W LED Lights with 5 CCT - cETLus Certified - White (TRACKLK-W)
• 8 Feet H-Track Light Set: 4 Dimmable 12W LED Lights with 5 CCT - cETLus Certified - White (TRACKLK8-W)