icon-info 0
No products in the cart.
  • fr
    • Back to Products
    FR
    0
    No products in the cart.
    Menu Search Cart
    40MM LOUVER ROUND TRIMS FOR RD12, WHITE
    40MM LOUVER ROUND TRIMS FOR RD12, WHITE

    40MM LOUVER ROUND TRIMS FOR RD12, WHITE

    SKU: LS-RD12-LVR-WT

    Brand: LUMENSTARLED

    Say goodbye to that annoying glare bouncing off your screen or your coffee table. The LS-RD12-LVR-WT is a 40 mm louver round trim in white, made to finish the RD12 mini recessed LED fixture — the little round LED light that disappears into stairs, decks, soffits, cabinetry and ceilings. People call it a louver ring, a mini trim, a glare shield, a cache for a recessed spot, or simply a ceiling housing trim. Whatever you call it, its job is simple and important: it hides the LED source from direct view, so you see the light, not the lamp. Homeowners use it to clean up a hallway or a staircase run, contractors use it to keep dozens of tiny apertures looking identical from one end of a corridor to the other.

    This trim belongs to the MINI LOUVER LED LIGHT platform built around the LS-RD12-LVR engine, a 12V DC low-voltage product offered at 0.5W, 1W or 2W for 75, 95 or 160 lumens. Colour temperatures in the family run 2700K warm white, 3000K warm white, 4000K natural white and 5000K white, so you can match the mood of the room instead of fighting it. The system is dimmable, carries an IP67 rating and is c ETL us Listed — a real advantage when the fixture lives outdoors, in a deck board, in a stair riser or anywhere water and snow show up uninvited. The louver blades and the trim ring share the same crisp white finish, so nothing stands out but the light itself.

    Where does it shine? Offices and boardrooms where screens hate glare, hotel lobbies and corridors, retail floors with merchandise or artwork to highlight, and upscale homes where the ceiling should look quiet. In Canada, the IP67 rating and 12V DC wiring make it a natural for covered porches, exterior stairs and cottage decks that swing from humid summers to deep freeze. This trim is an accessory: it is made for the RD12 mini recessed housing family and fits without modification, tools or improvising. Pair it with the Mini step and deck LED engine RD12-6LED for a complete low-voltage installation. Order the trims you need and finish the job properly.

    Compatible with
    Works with:
    Fixture: LS-RD12-1-27K, LS-RD12-1-3K, LS-RD12-1-4K, LS-RD12-1-5K, LS-RD12-2-3K, LS-RD12-2-5K, LS-RD12-2W-3K, LS-RD12-DTW

    6.97$

    Built to hide the source, not the light
    A louver trim does one thing extremely well: it puts a series of angled blades between your eye and the LED. The 40 mm louver round trim LS-RD12-LVR-WT drops the direct line of sight to the diode, which cuts hotspots and keeps light spill inside the zone you actually want lit. The result is a softer, more comfortable ceiling or stair line — the kind of detail people never notice consciously, but always feel. The white finish runs across both the ring and the blades, so the trim reads as one clean piece against white ceilings, white risers and light-coloured soffits.

    Light quality and electrical details
    The MINI LOUVER LED LIGHT platform runs on 12V DC, which means a low-voltage driver or transformer feeds the run and the wiring stays simple and safe to handle in tight cavities. Output options of 0.5W, 1W and 2W deliver 75, 95 and 160 lumens, enough for accent, marker and orientation lighting without blasting the space. Four colour temperatures are available in the family — 2700K warm white, 3000K warm white, 4000K natural white and 5000K white — so warm tones can stay warm in residential work while offices and commercial corridors get a crisper look. The product is dimmable, letting you tune late-evening levels in a hallway, a stairwell or a lobby.

    Technical specifications
    Product code: LS-RD12-LVR
    SKU: LS-RD12-LVR-WT
    Brand: LUMENSTARLED
    Voltage: 12V DC
    Wattage: 0.5W / 1W / 2W
    Light output: 75 / 95 / 160 lumens
    Colour temperature: 2700K warm white, 3000K warm white, 4000K natural white, 5000K white
    Aperture / louver: 40 mm
    IP rating: IP67
    Dimmable: Yes
    Certifications: c ETL us Listed
    Finish: White

    Installation and compatibility
    This trim is designed specifically for the RD12 recessed housing family, so the fit is precise — no filing, no shimming, no special tools. It inserts into place and sits flush, which is exactly what you want when you are installing a dozen units along a staircase or a run of deck boards and every aperture has to look identical. Because it is an accessory, it also serves as a replacement part: if a trim gets scratched during construction or you simply want to refresh an older installation, you swap the ring instead of the whole fixture. Keep a few spares on a large jobsite — it saves a return trip. It works hand in hand with the RD12-6LED mini step and deck LED engine, sold individually in 3000K or 5000K.

    Applications and documentation
    Think stair risers in a finished basement, deck and patio perimeters, a hotel corridor where guests walk at night, a retail display wall, a reception desk toe-kick, a boat dock or a garden path under a covered structure. The IP67 rating and c ETL us Listed certification make these small fixtures credible for Canadian exterior and damp locations, while the dimmable low-voltage platform keeps them friendly for residential renovations. The technical PDF for the MINI LOUVER LED LIGHT series is available in the Documentation tab of this page — check it before ordering to confirm the wattage and colour temperature you want for your run.
    Technical Files
    pdf-img MINI LOUVER LED LIGHT

    Helpful guides

    Related products

    Top