icon-info 0
No products in the cart.
  • fr
    • Back to Products
    FR
    0
    No products in the cart.
    Menu Search Cart
    SUSPENSION KIT #49/#87 – BLACK (KIT OF 1)
    SUSPENSION KIT #49/#87 – BLACK (KIT OF 1)

    SUSPENSION KIT #49/#87 – BLACK (KIT OF 1)

    SKU: LCPROFA-SUSKITALU-49-87-BK

    Brand: LEDCO

    Hang your aluminum profile exactly where you want it, at exactly the right height. This suspension kit (SKU LCPROFA-SUSKITALU-49-87-BK) is the black cable hanging kit made for LED profile #49 and #87, sold as a kit of 1 so you can order precisely the number of hanging points your run needs. People look for it under many names — kit de suspension, cable kit for linear fixture, ceiling suspension kit, hanging wire kit — but it all comes down to the same job: turning a surface-mount aluminum channel into a clean suspended linear light.

    The finish is black, so the cable and the ceiling canopy blend into dark ceilings, exposed structure and industrial-style interiors instead of drawing the eye. Because it ships as a kit of 1, you decide the spacing: two kits for a short profile, three or four for a long continuous run, plus extras for corners and joints. It works with LED strip lighting installations and their accessories, in residential as well as commercial projects, which makes it an easy add-on the day you realize your linear LED lighting can't be screwed straight to the deck.

    Suspended profiles are everywhere for a reason: over a kitchen island, above a dining table, along a hallway in a condo, over open-plan desks in an office, above a reception counter, in a garage workshop or a retail display aisle. In Canadian buildings with concrete slabs, exposed joists, high ceilings or T-bar grids, dropping the fixture down to working height is often the only way to get light where it matters. This black version pairs with profile #49 and profile #87; if your project uses a different extrusion, look at the Suspension kit #81 – black (kit of 1), the Suspension kit #14 (per unit) or the Suspension kit #94 (per unit). Add the hanging points to your cart with your profile and finish the job in one trip.

    Compatible with
    Works with:
    Channel / profile: LCPROF-49-16FT-BK, LCPROF-49-16FT-BK-LENS-OPAQ, LCPROF-49-8FT-BK, LCPROF-49-8FT-BK-LENS-OPAQ

    25.97$

    What's in the kit
    This is the black suspension kit for aluminum LED profiles #49 and #87, supplied as a kit of 1 — one hanging point. A suspended linear run normally needs at least two points, and more as the run gets longer or as you chain sections together, so count your points before ordering: one kit per point, no leftovers, no shortage. The matching alternative in a set of two is the Suspension kit #49 #87 (set of 2), handy when you are hanging a standard two-point fixture.

    Black finish, quiet result
    The black finish is the reason this version exists. On a painted black ceiling, exposed ductwork, dark joists or a matte black profile, a chrome or white cable stands out; a black cable kit disappears. The canopy at the ceiling and the hardware follow the same logic, so what people see is the light line, not the hardware holding it up. It is the detail that makes a DIY-looking install read as a designed one.

    Technical specifications
    SKU: LCPROFA-SUSKITALU-49-87-BK
    Type: suspension kit for LED aluminum profile
    Compatible profiles: #49, #87
    Finish: black
    Packaging: kit of 1
    Category: linear accessories

    Installation and compatibility
    The kit fits LED strip lighting installations and their accessories, for residential and commercial projects alike. Plan your anchor points into solid structure — joists, strapping, concrete anchors or the proper T-bar hardware — and keep the two ends of a profile at equal height so the light line reads straight from across the room. Adjust the cable length at each point until the profile is level, then run your low-voltage feed to the driver and keep the wiring tidy along the ceiling. Since it only suits profiles #49 and #87, confirm your extrusion number first; for other channels there are the Suspension kit #81 (kit of 1) and the Suspension kit #94 (per unit), and when a wall-mounted arm makes more sense than a cable, the Armkit aluminum bracket 18".

    Where it gets used
    Contractors reach for this kit over kitchen islands and dining tables, in stairwells and hallways, above office workstations, over retail counters, in salons, clinics, cafés and small warehouses — anywhere a ceiling is too high or too hard to mount on directly. Homeowners renovating a basement with exposed joists use it to bring a linear LED line down to eye-pleasing height, and small businesses use it to light a display island without touching the structure above. Keep a few extra kits on hand: on long continuous runs, an additional hanging point every time you join two profiles is the cheapest insurance against a sagging light line.

    Helpful guides

    Related products

    Top