LL8 STANDARD (6.56') 2M FROSTED (BOM)

Name: LL8 STANDARD (6.56') 2M FROSTED (BOM)
Brand: LUMENSTARLED
SKU: LS-LL8-L2
Price: 48.97 CAD
Availability: InStock

SKU: LS-LL8-L2

Brand: LUMENSTARLED

Give your LED strip lighting the finished, professional look it deserves. The LumenstarLED LL8 Standard 2M Frosted is a 6.56-foot (2 metre) aluminum channel with a frosted lens — the extrusion and diffuser combo that turns a bare tape light into a clean, continuous line of light. People search for it as an LED profile, an LED strip channel, an aluminum extrusion for LED tape, or simply a "frosted aluminum track for strip lights", and it all points to the same job: house the strip, protect it, hide the dots and make the installation look built-in rather than stuck on. SKU LS-LL8-L2. It's the go-to for under-cabinet lighting, cove and ceiling perimeters, display shelving, stair and hallway accents, closets, bars and reception desks.

The frosted lens is what sets this profile apart from clear-lens alternatives: it scatters the light across the full 2 metre length, eliminating harsh hotspots and visible LED dots for a soft, even luminous line. Per the LL8 compatibility chart, the channel accepts 3528, 3528-OUT, 2835 and 2835-MP flexible LED strips, and — unlike several other profiles in the family — it works with all of the solderless connectors (LS-SC1, LS-SC2 lead, LS-SC3 jumper, LS-SC4 corner and LS-SC7 block versions), so no soldering is required on a standard run. The 2 metre length fits typical cove depths, cabinet spans and display niches with minimal field cutting, and segments can be run standalone or lined up end to end for longer layouts.

This is a component, so let's be precise about what it pairs with: any of the LumenstarLED 3528 or 2835 indoor and moisture-proof tapes, such as the LED strip 12V 3528 120 LED/m, the 24V 3528 LED tape light 25M, or the 24V 2835 long run LED tape 10M in 3000K. From Vancouver condo kitchens to Québec retail displays and office reception walls, Canadian contractors use the LL8 to deliver repeatable, glare-free results. Add the length you need and finish the job properly.

Built as a system, not an afterthought
The LL8 Standard in its 2 metre (6.56') version is an aluminum mounting channel supplied with a frosted lens cover. Aluminum profiles do two jobs at once: they give the flexible tape a rigid, straight mounting surface and they act as a heat sink, drawing warmth away from the LEDs during long hours of operation. The frosted diffuser then does the optical work, blending the individual emitters into one continuous glow. That's the difference between an installation that reads as "a strip of LEDs" and one that reads as architectural light. Model code LS-LL8-L2, part of the LumenstarLED LL8 series built to consistent BOM (Bill of Materials) specifications so multiple pieces on the same job match.

Which LED strips fit
The compatibility chart for the LL8 lists 3528, 3528-OUT, 2835 and 2835-MP flexible strips — meaning indoor tapes, outdoor-rated 3528 and moisture-proof 2835 all seat in this channel. That covers a wide slice of the Lumenstar flexible line, including 12V DC and 24V DC single-colour tapes at 60, 72 and 120 LEDs per metre. Since the tape itself carries the electrical specifications (voltage, watts per metre, lumens per metre, CRI, colour temperature, dimming), choose your strip first, then cut and mount the LL8 to suit. A quick reminder from the strip guide: 3528 tapes are typically W8 x H1.5 mm and 2835 indoor tapes W10 x H1.5 mm, so check your tape width before ordering the channel.

Connectors and wiring
One of the strong points of the LL8 profile: the accessories guide marks it as compatible with all solderless connectors, where several other channels in the range require a production lead or soldering. That means you can use the LS-SC1 straight connector, LS-SC2 lead, LS-SC3 jumper, LS-SC4 corner and LS-SC7 block in 3528, 3528-120 or 2835 versions, depending on the tape you selected. Strips run on low-voltage DC and need a matching Class 2 LED power supply (12V DC or 24V DC, sized to the total wattage of your run) plus a compatible dimmer where dimming is wanted. Keep runs within the manufacturer's stated maximum length per feed and plan your driver location before the channel goes up.

Where it earns its keep
Under kitchen cabinets and in toe-kicks, along cove ceilings in a living room or hotel corridor, inside retail shelving and display cases, above bathroom mirrors, on stair nosings, under bar counters, and in office reception coves where visual comfort matters. The 2 metre length is a practical segment: long enough for a full cabinet run or a wall niche, short enough to handle, transport and cut down on site. Straight runs can be daisy-chained end to end, and corners are handled with corner connectors between two lengths of channel. Pair it with a 24V 2835 long run LED tape in 4000K for workspaces, or a warmer 2835 super long run tape in 2700K for hospitality and residential accents. For task or downlight zones in the same room, the 4" slim recessed LED panel downlight 8W shares the same low-voltage approach.

Documentation
The LS-LL8-L2 spec sheet is available in the Documentation tab of this page. It includes the flexible LED strip lighting guide with LED counts, voltages, lumens per metre, CRI, watts per metre, cut increments, LED types and tape dimensions, the solderless connector reference, the full aluminum channel compatibility table, and the LED power supply listing — everything you need to spec the complete system in one pass.

Technical Files