COMMERCIAL GRADE STRING LIGHTS, SUSPENDED, 120V, 100' LENGTH, 48 X E26 SOCKETS

COMMERCIAL GRADE STRING LIGHTS, SUSPENDED, 120V, 100' LENGTH, 48 X E26 SOCKETS

SKU: LS-S-48-100

Brand: LUMENSTARLED

Nothing turns a plain patio into a place people want to stay quite like a run of glowing bulbs overhead — and the LUMENSTARLED LS-S-48-100 commercial grade string lights are built to do it season after season. Also searched as festoon lighting, patio string lights, café lights, catenary string lights or commercial LED lighting for outdoor spaces, this single 100-foot run comes with 48 evenly spaced E26 medium-base sockets, so you get that clean, professional, perfectly repeated rhythm of light instead of the sagging tangle you get from consumer-grade sets. Hang it over a restaurant terrace, a brewery courtyard, a backyard pergola, a market street, a wedding tent or a job-site canopy, and let the bulbs do the decorating.

The numbers are refreshingly straightforward. You get a full 100' length in one continuous run with 48 x E26 sockets, operating on 120V AC — the standard voltage in homes and businesses across Canada — so no extra transformer or converter is needed to get it lit. The system handles up to 1200W maximum, which leaves plenty of headroom whether you load it with low-draw LED filament bulbs or heavier traditional lamps. It is cETLus Listed, an important checkmark when an inspector, a landlord or an insurer asks questions about a commercial installation. And because the sockets are standard E26 medium base, you choose the look: vintage filament globes, frosted LED spheres, shatter-resistant lamps, or a colour temperature that matches your brand. Swap them later and the whole mood changes without touching the wiring.

This one earns its keep on restaurant and pub patios, boutique hotel courtyards, garden centres, campgrounds, marinas, event venues, festival grounds, food truck lots and backyard decks from Vancouver to Halifax. Contractors like it for spanning between poles, along rooflines, over pergolas and across open terraces in a suspended catenary or festoon layout — run a support cable, clip the string to it, and let the guide wire carry the weight rather than the cord. Plan your bulb count and total wattage before you order lamps, keep the run on a dedicated circuit, and add a timer or photocell if you want it to come on by itself at dusk. Ready to light up the season? Add SKU LS-S-48-100 to your project and start stringing.

250.97$


Built for commercial duty, not a weekend
There is a real difference between a decorative set from the seasonal aisle and a true commercial grade string light. The LS-S-48-100 is designed as a suspended festoon run: 100 feet of continuous cabling carrying 48 E26 medium-base sockets at consistent, evenly spaced intervals. That consistency is what makes an installation look intentional — every bulb lands where the eye expects it, whether you are lighting a 100-foot terrace in one shot or breaking the run into bays between posts. Because it is conceived for suspended catenary and festoon configurations, it is meant to be supported along its length rather than hung from the cord alone, which is exactly how professional installers keep a long span looking straight and staying up through wind and winter.

Technical specifications
Product code: LS-S-48-100
Base: E26 medium base
Number of sockets: 48
Length: 100'
Max watts: 1200W
Voltage: 120V AC
Certifications: cETLus Listed

Electrical planning and installation
Running on 120V AC means this string plugs into the same standard line voltage found in Canadian homes, shops and restaurants — no step-down transformer, no special gear, no surprises for the electrician. The 1200W maximum rating is your budget to spend across the 48 sockets: divide it by the wattage of the lamps you choose to confirm you are inside the limit, and remember that modern LED filament bulbs draw a fraction of what incandescent lamps do, which leaves generous margin on a single run. For the physical install, string a stainless or galvanized guide wire between your anchor points first, tension it, then attach the light string to that wire with clips or ties so mechanical load stays off the electrical cord. Keep connections accessible, protect the supply end, and feed the circuit from a protected outdoor receptacle. The cETLus Listed mark supports acceptance on commercial projects where certified equipment is required.

Bulbs, light quality and flexibility
The beauty of an E26 socket system is that the fixture never dictates the look. Warm vintage filament lamps give you that golden, nostalgic patio glow; frosted LED globes read cleaner and more contemporary; shatter-resistant lamps make sense over dining areas, pools and playgrounds. You can also match a colour temperature to a brand palette, or change it entirely next season — the sockets stay, the mood changes. Because bulbs are sold separately, you keep full control over efficiency, dimming behaviour and replacement cost over the life of the installation. Always confirm that the lamps you select are rated for the environment where the string will hang.

Where it shines, and the paperwork
Think restaurant and pub patios, brewery and winery courtyards, boutique hotel gardens, campgrounds and RV parks, marinas, garden centres, farmers' markets, event tents, festival grounds, rooftop lounges and residential backyards and pergolas — anywhere a warm overhead canopy of light makes people linger. Contractors also use long festoon runs for temporary event lighting and site work where a tidy, certified 120V string light beats an improvised solution. The technical PDF for the 100 Suspended String Lights is available in the Documentation tab of this page, with the product code, socket type, length, maximum wattage, voltage and certification listed for your submittals and permit package. Plan your layout, count your bulbs, and get the season started with LS-S-48-100.
Top