CLIPS FOR 180 DEGREE COB HIGH VOLTAGE LED STRIP LIGHT

Name: CLIPS FOR 180 DEGREE COB HIGH VOLTAGE LED STRIP LIGHT
Brand: CANOLIGHT
SKU: CL-ST-180-11065-clips
Price: 0.97 CAD
Availability: InStock

SKU: CL-ST-180-11065-clips

Brand: CANOLIGHT

Anyone who has watched a beautiful run of LED strip lighting sag, twist or pop loose from a ceiling cove knows the truth: the tape is only as good as what holds it up. The CANOLIGHT CL-ST-180-11065-clips are the dedicated mounting clips made for 180-degree COB high voltage LED strip light — the flexible, dot-free LED strip lights people also call COB tape light, rope light or linear strip lighting. Sold as the matching accessory for that strip profile, these little brackets do one job and do it perfectly: they cradle the strip, hold the line straight and keep every metre of your run exactly where you put it, from the first clip to the last.

Because they are shaped for the specific profile of 180-degree COB LED strip, the fitment is precise instead of "close enough". That matters more than it sounds. A 180-degree strip throws light across a wide semicircular arc, and any mount that pinches, twists or blocks part of that arc shows up instantly as shadowing, hot spots or uneven brightness along the run. These clips grip the strip firmly while leaving the emitting surface free to radiate in every intended direction, so the light stays smooth and continuous. They also spread the holding force evenly along the strip rather than concentrating it on one spot, which protects the circuit board and the connectors from the stress that causes premature failures on long installs of high voltage COB LED strip.

Installation is quick and tool-friendly: attach the clips to ceilings, walls, cabinet interiors, coves, stair nosings, shelving or architectural details, then press the strip into place and keep moving. Electricians, renovators and lighting designers across Canada use them for repeatable, professional results on long runs — retail displays, restaurant and bar millwork, hotel corridors, office feature walls, basement coves, kitchen cabinetry and garage or workshop accent lines. Order enough clips for the full length of your project, spaced consistently, and your installation will look as crisp in five years as it does the day you finish it. Reach for the manufacturer-matched clips (SKU CL-ST-180-11065-clips) and give your strip the support it deserves.

Compatible with
Works with:
LED strip: CL-ST-180-10-11065-3K, CL-ST-180-10-11065-4K, CL-ST-180-10-11065-5K

Purpose-built mounting hardware
These CANOLIGHT clips are not generic brackets adapted to fit — they are engineered specifically for 180-degree COB high voltage LED strip light. The channel of each clip matches the strip's profile, so the tape seats fully and squarely instead of rocking or rotating. That precise fitment is what keeps a long run reading as one clean, straight line of light rather than a wavy one, and it is why professional installers insist on manufacturer-matched accessories for COB LED strip projects.

Protecting the light output
A 180-degree strip is designed to emit across a wide semicircular arc, which is exactly why it looks so good in coves, under handrails and around curved millwork. Any mounting method that covers part of the emitting surface — tape, zip ties, improvised hooks — creates visible shadowing and hot spots. These clips hold the strip from the correct contact points only, leaving the light free to spread as designed. The result is the even, dot-free wash that COB strip lighting is known for, from the first metre to the last.

Protecting the strip itself
Most premature LED strip failures on job sites are mechanical, not electrical: a pinch point on the circuit board, a tug on a solder joint, or a connector taking the weight of a hanging section. These clips distribute holding force evenly along the run so no single point carries the load, which keeps stress off the board and the connectors of your high voltage LED strip throughout its service life. On vertical faces and overhead runs, consistent clip spacing is the single easiest way to guarantee the install still looks right years later.

Installation and applications
Mounting is straightforward and tool-friendly: fix the clips along your layout on ceilings, walls, cabinet interiors, shelves, cove ledges, stair stringers or architectural reveals, then press the strip in. Plan the spacing before you start, add clips at every corner and near each connection point, and keep runs supported where they cross a joint. Typical Canadian projects include basement and living-room coves, kitchen and bathroom millwork, retail shelving and display cases, restaurant bars, hotel corridors, office reception features, showroom perimeters and workshop or garage accent lines. Order the clip quantity to match the full length of strip you are installing rather than the bare minimum — the extra support costs you nothing in appearance and pays off in durability.

Technical specifications
SKU: CL-ST-180-11065-clips
Brand: CANOLIGHT
Type: mounting clips (accessory)
Designed for: 180-degree COB high voltage LED strip light
Installation: surface mount on ceilings, walls, cabinet interiors and architectural features
Documentation: CL-ST-180-11065-clips spec sheet (technical PDF) available in the Documentation tab

Technical Files