BUTT CONNECTOR FOR TRACK - LCTC-I-6101-BN

Name: BUTT CONNECTOR FOR TRACK - LCTC-I-6101-BN
Brand: LEDCO
SKU: LCTC-I-6101-BN
Price: 17.97 CAD
Availability: InStock

SKU: LCTC-I-6101-BN

Brand: LEDCO

When one length of track isn't enough, the butt connector for track LCTC-I-6101-BN bridges the gap. It connects two sections of track end to end, so you can build a continuous run that follows a long counter, a corridor or a full wall of shelving. People searching for a track joiner, a straight connector or an inline track connector are looking for exactly this part. It is the simple way to take track lighting heads from one side of the room to the other without breaking the line.

This listing covers the BN version of the connector. The same butt connector for track also comes in BK, SL and WH versions within the series, which helps you coordinate it with the rest of your hardware. Using one connector per straight joint, you can plan a run of track that fits the space instead of adapting the space to the track. Made for residential and commercial projects, it is part of the LCTC range of track lighting components, alongside the end pieces that begin and finish each run. Keep one version code throughout, and the line of track reads as a single, clean element in the room.

Canadian homes and businesses use long track runs everywhere, from a renovated triplex in Montréal to a craft brewery taproom in Halifax or an open-concept office in Calgary. To finish the run in the same LCTC series, see the right end connector for track in the BN version and the end connector and track plate. Ask a qualified electrician to handle the wiring with the power off, then clip your track light heads along the run and aim them where the light is needed. Order your track connectors with the rest of your parts and bring your lighting plan to life!

Compatible with
Works with:
Channel / profile: LCTK-6002-BN, LCTK-6004-BN, LCTK-6008-BN

Joining sections the clean way
A track lighting system is built from sections of track and the fittings that link them. The butt connector for track LCTC-I-6101-BN is the fitting used where two sections meet in a straight line, end to end. It turns separate lengths into one continuous run, which is what you want along a long kitchen, a hallway or a shop wall. You may also see it described as a straight track connector or a track joiner. It is the part that makes a long, uninterrupted line of light possible.

Counting your parts
Before you order, measure the total length of the run and decide how many sections it will take. Every straight joint between two sections needs one butt connector, and each end of the run needs its own fitting: in the LCTC series, the right end connector for track in the BN version and the end connector and track plate are among the end pieces available. Choosing all your track rail components in the same series, with the same version code, is the easiest route to a uniform look.

Tips for a straight, tidy joint
Switch off the power at the breaker before starting, and have the electrical connections done by a qualified electrician according to the electrical code of your province. Confirm that the connector suits your track profile. Hold both sections in line, check them with a level, and secure the connector only once the joint is perfectly straight and flush with the ceiling or wall. Take your time here: a well-aligned joint blends into the line of track. When the run is complete, install your track lighting heads, spacing them so the light covers the whole length evenly.

Projects that call for longer runs
In homes, longer runs of track lighting are popular above kitchen counters and islands, in long hallways, in open-concept living and dining areas, in basements and above a wall of shelves. In businesses, they light store aisles, merchandise walls, restaurant counters, galleries, studios and open offices. It is also a practical way to light a long reception desk or a bar from end to end. Wherever the space is long, the butt connector lets the track follow it. The connector is designed for residential and commercial projects, for new builds and renovations alike across Canada.

Product details
Model: LCTC-I-6101-BN
Product type: butt connector for track
Category: track rail component
Series: LCTC
Version: BN (also offered in BK, SL and WH)
Applications: residential and commercial projects