BLACK ROCKER SWITCH – ON/OFF – 12/24V

Name: BLACK ROCKER SWITCH – ON/OFF – 12/24V
Brand: LEDCO
SKU: LCLSACC-TOUCH-ON-OFF-BK
Price: 18.97 CAD
Availability: InStock

SKU: LCLSACC-TOUCH-ON-OFF-BK

Brand: LEDCO

Turning your LED strips on and off shouldn't mean fishing for a remote or pulling a plug. This black rocker switch is the simple, satisfying answer: a compact low voltage switch that cuts power to your LED strip lights with one press, right where you need it. People look for it under all kinds of names — touch switch, interrupteur noir, on/off strip light switch, LED tape light switch, 12V switch or 24V switch — but the job is always the same: give a strip run, a light bar or a low-voltage fixture its own dedicated control, with a discreet black finish that disappears into dark cabinetry, millwork, closet jambs, van and trailer panels, display cases and shop benches.

This is an ON/OFF switch rated for 12V and 24V DC systems, which means it drops straight into the vast majority of LED strip installations — the same 12/24V world as your driver, your dimmer and your amplifier. The black housing keeps it visually quiet on dark surfaces, and the rocker action gives you that clean, positive click so nobody is left wondering whether the lights are actually off. Because it's a straight on/off control, there's nothing to program, no app, no pairing and no batteries to replace: wire it inline on the low-voltage side and it simply works, year after year, for residential and commercial projects alike. The SKU is LCLSACC-TOUCH-ON-OFF-BK.

It shines wherever a strip run needs its own local switch: under kitchen cabinets, inside pantries and walk-in closets, over a bathroom vanity, along basement stair nosings, in garage workbenches, retail display shelving, reception desks, bar backs and cold-climate garage or cottage projects where a simple, reliable control beats anything wireless. Use it alongside your other LED strip controls — it pairs naturally with the Sensor blue touch 12/24V 3A, the Door opening detector 12V-24V and the 4-channel 20A amplifier on larger runs. Prefer a matching white face? Grab the White rocker switch – ON/OFF – 12/24V. Add it to your cart and give every strip run the switch it deserves.

Built to stay out of the way
The whole point of this black rocker switch is discretion. The dark face blends into black melamine, walnut and stained oak millwork, matte black panels, aluminum profiles and equipment housings, so the control reads as part of the cabinetry instead of an afterthought stuck on the side. The rocker itself gives a firm, tactile press — no guessing, no half-states — which matters in closets, cabinets and service areas where the strip isn't always in your line of sight when you operate it. With no display, no indicator to burn out and no electronics to configure, it's the kind of accessory installers reach for again and again on LED strip lighting jobs.

Electrical and installation
This is a low-voltage ON/OFF switch for 12V and 24V DC circuits, so it belongs on the secondary side of your LED driver or power supply, between the driver output and the strip. Keep polarity consistent, interrupt the same conductor throughout the run, and make your connections mechanically sound — solder-and-shrink or a quality low-voltage connector — because vibration and cabinet slams are what kill strip installations, not the LEDs. On longer runs, keep the switch close to the driver rather than at the far end of the tape to minimize voltage drop along the circuit. Always confirm the current draw of your strip against the rating of the control you choose, and follow the Canadian Electrical Code and local requirements for the low-voltage wiring method in your installation.

Technical specifications
SKU: LCLSACC-TOUCH-ON-OFF-BK
Type: rocker switch, ON/OFF
Voltage: 12/24V
Finish: black
Application: residential and commercial projects

Compatibility with your strip system
Because it's a plain on/off device on a 12/24V circuit, it plays nicely with the rest of the low-voltage family. Use it as the master kill for a zone controlled by the 4 zone W24 wall controller – RGB/RGBW or the 4 zone W21 wall controller – white, pair it with a Sensor blue touch 12/24V 3A for cabinet-level touch control, or let a Door opening detector 12V-24V handle automatic pantry and wardrobe lighting while this manual switch stays as the override. When a run gets long enough to need re-injection, a 4-channel 20A amplifier keeps colour and brightness even end to end. Same function, different look? See the Black switch – ON/OFF – 12/24V.

Where it earns its keep
Kitchen renovations are the classic case: one rocker under the upper cabinets for the task lighting, independent of the room's main circuit. Beyond that, think garage workbenches and tool walls, basement bars, home theatre riser lighting, mudroom benches, walk-in closets and dressing rooms, retail display cases and shelving, reception counters, hospitality millwork, trade-show booths, and RV, trailer and marine cabinetry where 12/24V DC is already the standard. Small businesses love it for backlit signage and display shelves that need to be shut off at close without touching the panel. There is no spec sheet in the Documentation tab for this accessory, so check your strip and driver documentation for load and wiring details, and don't hesitate to ask if you're unsure which control suits your run.