WHITE ROCKER SWITCH – ON/OFF – 12/24V

Name: WHITE ROCKER SWITCH – ON/OFF – 12/24V
Brand: LEDCO
SKU: LCLSACC-TOUCH-ON-OFF-WH
Price: 18.97 CAD
Availability: InStock

SKU: LCLSACC-TOUCH-ON-OFF-WH

Brand: LEDCO

Tired of unplugging your LED tape or fumbling for a remote every time you want light under the cabinets? This white rocker switch is the simple, satisfying answer. Also called a touch switch, an on/off switch or a low-voltage LED strip switch, it does one job perfectly: it turns your LED strip lights on and off with a single press. It's the accessory that finishes a strip light installation properly, whether you're lighting a kitchen backsplash, a closet, a pantry, a display case, a set of stairs or a shop workbench. SKU LCLSACC-TOUCH-ON-OFF-WH.

Built for 12V and 24V low-voltage LED systems, it wires in line between your driver and your strip, so the control lives exactly where you need it instead of across the room. The clean white finish blends into white cabinets, white melamine, drywall returns and light-coloured millwork, so the switch disappears and only the light gets noticed. There's nothing to program, nothing to pair and no app to download — press, light on; press again, light off. That straightforward, reliable operation is exactly what you want for a closet, a cabinet interior or any spot where a guest, a tenant or a client will be the one using it.

Contractors and cabinetmakers keep these on the truck because every strip light job eventually needs a local control: under-cabinet LED strip lighting in a kitchen, toe-kick lighting in a bathroom vanity, a walk-in closet, a home bar, a bookcase, a retail display, a reception desk or a garage workbench. Homeowners love it for a basement renovation or a cottage project where a simple on/off beats a complicated system. It pairs naturally with the rest of the low-voltage family: choose the Black rocker switch – on/off – 12/24V for dark millwork, add a Sensor – blue touch – 12/24V – 3A for a touch-activated cabinet, or a Door opening detector 12V-24V so the light comes on by itself. Add it to your order and give every run of strip light the switch it deserves.

A simple control made for low-voltage LED
Every good LED strip light installation needs a way to turn it off without pulling the plug. This white rocker switch is that piece. It is a dedicated 12/24V low-voltage switch, meaning it is designed to sit on the secondary side of your LED driver — between the driver output and the strip — and interrupt the DC feed to the tape. That's what makes it so easy to add to cabinetry and furniture work: no line-voltage box, no complicated rough-in, just a tidy little control exactly where the user's hand goes.

Technical specifications
SKU: LCLSACC-TOUCH-ON-OFF-WH
Type: rocker switch, on/off
Voltage: 12V / 24V
Finish: white
Application: residential and commercial projects

Installation and wiring
Plan the switch position before you close up the millwork: the ideal spot is the front edge of a cabinet, the inside face of a closet jamb, the side of a headboard or the underside of a shelf, somewhere a hand naturally lands. Run your low-voltage wire from the driver to the switch, then from the switch out to the strip, keeping polarity consistent and connections clean and mechanically solid. Because it's a simple on/off device, it will control the whole run downstream of it — if you want two areas controlled separately, use one switch per zone, each fed from the same driver or from its own driver. Always size your driver for the total wattage of the tape it feeds, and keep the switch accessible for the end user rather than buried behind a drawer box.

Where it earns its keep
In a kitchen, it gives the client a real under-cabinet switch instead of a remote that ends up in a drawer. In a walk-in closet or pantry, it's the fastest, most intuitive control there is. In a bathroom, it handles vanity and mirror strip lighting; in a basement renovation, stair nosing and niche lighting; in a home office, shelf lighting behind the desk. On the commercial side, it's perfect for retail display cases, jewellery counters, bar backs, reception desks, hotel headboards and trade-show booths where staff need a control they can find without thinking. The white finish is the one to pick against white cabinets, painted MDF, light laminate and pale drywall.

Compatibility and companion products
This switch works with 12V and 24V LED strip systems and can be combined with the rest of the low-voltage control family depending on how much control you want. For the same switch in a dark finish, see the Black rocker switch – on/off – 12/24V. For touch-style activation inside cabinets, look at the Sensor – blue touch – 12/24V – 3A, and for automatic light when a door opens, the Door opening detector 12V-24V. On larger projects where you want zones and dimming from the wall, the 4 zone W21 wall controller – white is the natural step up. No spec sheet or IES file is published for this accessory; if you need help matching it to your driver and tape, our team is happy to walk through the layout with you.