6PCS/PACK - PRO-SP7 SLIM PANEL - METAL TRIM - 4" - 8W (750LM) - SELECTABLE 27-30-35-40-50K - 120V TRIAC DIMMABLE - WHITE - FT4 CABLE - WET LOCATION.

6PCS/PACK - PRO-SP7 SLIM PANEL - METAL TRIM - 4" - 8W (750LM) - SELECTABLE 27-30-35-40-50K - 120V TRIAC DIMMABLE - WHITE - FT4 CABLE - WET LOCATION.

SKU: PRO-SP7/4/8W/MK5/120/WH/D

Brand: TUROLIGHT

Say goodbye to bulky housings and endless cutting: the TUROLIGHT PRO-SP7 slim panel in 4" gives you a clean, modern ceiling in minutes. Sold 6 pieces per pack, this slim LED downlight — also known as a pot light, canless recessed light, LED ceiling panel or thin recessed panel — is the go-to solution for renovations, new builds, condo ceilings and commercial refits where depth is tight. Its back-lit design and premium opal diffuser spread a soft, even wash of light with no hot spots and no glare in your eyes, which is exactly what people are looking for when they search for dimmable LED downlights that actually look good and behave well. Kitchens, hallways, bedrooms, basements, offices, retail: one product covers almost every ceiling in the project.

Each fixture draws only 8W and delivers 750 lumens on 120V, with a CRI ≥ 80 so skin tones, wood grain and paint colours stay true. The 5 field selectable CCT options — 27K, 30K, 35K, 40K and 50K — let you pick the exact white on site: warm and cozy in a bedroom, neutral in a kitchen, crisp daylight in a workshop, all from the same box. TRIAC dimming gives you full control of the mood, the 120° beam angle covers the room generously, and the rated life is 50,000 hours. The metal trim ring is finished in white, with a quality PMMA white trim guaranteed against yellowing by a 5 year warranty. It is wet location rated and IC-rated for direct contact with insulation, with an operating range of -20 ˚C to +40 ˚C. Dimensions: 4.92" diameter × 1.07" height, 4.13" cut-out, mounted with spring clamps, and it is Energy Star listed.

This is the panel Canadian homeowners and contractors reach for when the joist bay is shallow, when the ceiling is insulated, or when a covered porch, soffit or bathroom needs something rated for damp, humid conditions. It works beautifully in offices, malls, hotels and residences alike, and the FT4 cable makes wiring straightforward. Need just one unit for a repair or a small area? Grab the PRO-SP7 slim panel single pack. Want a different look? Swap in the RGD-SP3 4" black trim ring or the RGD-SP3 4" brushed nickel trim ring, both compatible with the PRO-SP7. Order SKU PRO-SP7/4/8W/MK5/120/WH/D and light the whole floor with one pack.

75.97$


Supplier availability: In stock (+500)

Built for shallow ceilings
The PRO-SP7 uses a special eco-designed body engineered for better thermal management, so the LEDs stay cool and hold their output over the long run. The back-lit slim profile is only 1.07" high, which makes it suitable for low-depth installation where a traditional housing simply will not fit — think 2x4 ceilings, furred-down bulkheads, condo slabs and retrofits over ductwork. The metal trim ring gives the fixture a solid, finished feel at the ceiling line, and the quality PMMA white trim is guaranteed against yellowing under the 5 year warranty, so your ceiling still looks new years after the paint dries.

Light quality you can tune
A premium-grade opal diffuser spreads the light evenly and kills the glare you get from cheap open-aperture downlights, while the 120° beam angle washes walls and floors without dark gaps between fixtures. With 5 field selectable colour temperatures (27K, 30K, 35K, 40K and 50K) you set the white directly on site with the fixture's selector — no need to stock five versions of the same LED panel light. CRI ≥ 80 keeps colours honest, which matters in kitchens, bathrooms, boutiques and anywhere clients judge finishes under the light.

Technical specifications
Model: PRO-SP7/4/8W/MK5/120/WH/D
Brand: TUROLIGHT
Pack: 6 pcs/pack
Wattage: 8W
Lumens: 750 lm
Input voltage: 120V
CCT: 27/30/35/40/50K field selectable
CRI: 80
Beam angle: 120°
Rated life: 50,000 hours
Dimming: TRIAC
Dimensions: 4.92" × 1.07"
Cut-out: 4.13"
Location: Wet location, IC-rated
Operating temperature: -20 ˚C ~ +40 ˚C
Finish: White
Energy Star: Yes
Warranty: 5 years

Installation and electrical
Recessed mounting is handled by spring clamps: cut a 4.13" hole, connect the driver, fold the clips and push the panel up flush. The 120V LED driver shares the same -20 ˚C to +40 ˚C operating range as the fixture, and the FT4 cable is ready for the junction box. Because the unit is IC-rated, it can sit in direct contact with insulation — a real advantage in Canadian attics and insulated cathedral ceilings — and the wet location rating covers showers, covered porches and soffits. On the control side, pair it with a quality TRIAC (forward phase) dimmer and respect the dimmer's minimum and maximum load: with 8W per fixture you can run a generous group on a single switch.

Applications, accessories and documentation
Turolight lists offices, malls, hotels and residences as target applications, and that is exactly where this panel earns its keep: a corridor lined with 4" downlights at 40K, a hotel bathroom at 30K, a boutique fitting room at 35K, a basement rec room at 27K. Need a single unit to finish a room or replace one fixture? See the PRO-SP7 single pack. For a black or nickel accent, the RGD-SP3 black trim ring and the RGD-SP3 brushed nickel trim ring are listed as compatible accessories. For larger open areas on the same job, the PRO-BLP3 2x2 backlit panel keeps the same family look in a grid ceiling. The full spec sheet for PRO-SP7/4/8W/MK5/120/WH/D, with the dimensional drawing, polar candela curve and ordering guide, is in the Documentation tab.

Related products

Top