24V - DC2.1 - SPLITTER 4XMALE - 1XFEMALE FOR TAPE - STR - SLM PUCK - LED-SP-4

Name: 24V - DC2.1 - SPLITTER 4XMALE - 1XFEMALE FOR TAPE - STR - SLM PUCK - LED-SP-4
Brand: LITELINE
SKU: LED-SP-4
Price: 49.97 CAD
Availability: InStock

SKU: LED-SP-4

Brand: LITELINE

The 24V DC2.1 4-Way LED Splitter (SKU LED-SP-4) lets a single 24V driver feed several low-voltage lights at once. With 1 female and 4 male DC2.1 connectors, this splitter harness takes the output of one driver and divides it into 4 connections, so you can power multiple lengths of LED tape, STR lights or SLM puck lights without buying a separate power supply for each one. It is what you need when you search for an LED splitter cable, a 4-way connector for puck lights or a simple way to run several under-cabinet lights from one plug-in driver.

The big advantage is fewer drivers, fewer outlets and a much tidier installation. Instead of a cluster of adapters under the counter, one driver connects to the splitter and the splitter branches out to each light, all with plug-in connectors, no stripping or soldering required. It is made for the 24V DC2.1 plug-in family, so it pairs naturally with the 24V DC LED driver 60W with power cord and plug, which uses the same DC 2.1 connection. Just keep the combined wattage of every connected light within the rating of the driver.

In Canadian kitchens, the splitter makes it easy to light several upper cabinets from a single outlet. It is just as handy for display cabinets, bookcases, bars, closets and boutique shelving. Add the LED-SP-4 to your 24V tape or puck light project for a cleaner, faster installation.

One driver, four lights
In plug-in low-voltage lighting, every light needs a connection to a driver. The LED-SP-4 splitter makes one driver do the work of several: its single female DC2.1 connector joins the driver side, and its 4 male connectors branch out to 4 separate lights. The result is a cleaner layout, fewer power supplies and fewer outlets used, which matters in kitchens where outlets are reserved for appliances.

Made for 24V plug-in lighting
This splitter is intended for 24V systems using the DC2.1 plug-in connection, including LED tape, STR lights and SLM puck lights. Because everything plugs together, installation needs no stripping, no soldering and no wire nuts on the low-voltage side. For a complete setup, pair it with the 24V DC LED driver 60W, a plug-in driver with the same DC 2.1 connection.

Planning the load
A splitter distributes power; it does not add any. Before connecting, add up the wattage of every light you plan to plug into the splitter and make sure the total stays within the driver's rating, with a comfortable margin. Check that each light is designed for 24V DC. For larger projects, use several drivers, each with its own splitter, and divide the lighting into zones.

Installation tips
Place the driver and the splitter in a dry, accessible spot, such as on top of the upper cabinets or inside a cabinet, and route the leads to each light along the underside of the cabinets. Use clips to hold the wires in place and keep connections away from heat sources. Unplug the driver before connecting or disconnecting any light.

Ideal applications
Use the splitter to light a row of kitchen cabinets with puck lights, to combine several runs of tape light in a bar or a bookcase, to light display cabinets in a boutique or showroom, or to brighten a closet with multiple fixtures from a single outlet.